emojunky: the narrated explainer (voice fitted to the shots, mixed in)
Transcript
packet: brief.md13:01:57
# emojunky — the narrated explainer: fit the voice to the shots and mix it in
You are implementing under an agreed brief written by Fable (Claude), who is
directing this work for the owner. The brief closes the high-level decisions;
the details are yours to decide, and you list the ones you made in the report.
Where the brief is silent on something that would change the approach, where it
turns out to be wrong, or where a step would reach outside the scope below --
other people's servers, rate limits, large downloads, disk, network, money,
anything the brief did not put in your hands -- stop and report instead of
choosing. Read `C:/Users/a327e/Desktop/a327ex/emojunky/.claude/CLAUDE.md` for
project facts (paths, docs, commands, gotchas); its process rules about briefs
and asking the owner bind Fable, not you. Do not commit, push, run the game
interactively (never `run.bat`), or touch files outside the scope. End with the
report in the format given.
## Task
The silent explainer `rounds/07-explainer/explainer.mp4` (3:21, built by
`tools/explainer/assemble.py` from the captured frames) gets a narration. The
owner picked the voice (a 50/50 blend of two VCTK speakers, already built into
Piper as speaker 110 of `Desktop/tools/piper/voices/en_GB-vctk-merges.onnx`)
and wrote the script with explicit pauses: `rounds/08-narration/script.txt`,
rendered line by line by `tools/explainer/narrate.py` into
`rounds/08-narration/take1/`. Produce `rounds/07-explainer/explainer-narrated.mp4`
(a NEW file; the silent one stays as it is): the same captured frames, the
narration placed under the shots it belongs to, the on-screen captions
replaced by the narration's own sentences timed to the voice, the cards'
text brought in line with the script, and the visuals held where a line runs
longer than its shot. No re-capture: the frames are the frames.
Read first: `tools/explainer/assemble.py` (the running order `SCRIPT`, `take`
/ `card` / montage segments, the caption band, the ffmpeg pipe),
`tools/explainer/narrate.py` (the renderer: a line is split at `{seconds}`
markers, chunks rendered separately and joined with that silence),
`rounds/08-narration/script.txt` (the owner's text; the `#` header explains
the markers), the CLAUDE.md section "The X-ray and the explainer video".
## Approach
### 1. Timings from the renderer
Extend `narrate.py` (keep its command-line behaviour) to also write
`<take>/timing.txt`: per line, the line id, its total duration, and one row
per spoken CHUNK (the text between pause markers) with its start offset
inside the line and its text. Add a `--length-scale` option passed to Piper
(`--length_scale`; 1.0 = as now, 0.9 = 10% faster) and an `--out` name.
Render `take2` at the scale you settle on (see 3).
### 2. Which line goes under which segment
Each script line id names the segment(s) it plays over. Map them in
`assemble.py` (a table next to `SCRIPT`, or an id on each segment):
| line | segment(s) |
|---|---|
| question | the question card (the title card before it stays silent) |
| plain | take `plain` |
| answer | the "Close, but no" card, whose text becomes the script's line |
| box, points, limbs, ik | their takes |
| targets | the "Where do the targets come from?" card |
| ledge | takes `ledge` + `wall` (one line over two consecutive takes) |
| grips, feet | their takes |
| springs | the springs card |
| spring-off / -soft / -stiff | their takes |
| bounce | takes `bounce-low` + `bounce-high` |
| juice | the juice card |
| juice-run-off / -full, juice-breath, juice-rope | their takes |
| juice-land | takes `juice-land-off` + `juice-land-full` |
| styles | the styles card |
| style-walk ... style-crouch | that action's group of clips inside the styles montage |
| builds | the builds card |
| build-montage | the builds montage |
| tuner | take `tuner` |
| close | the closing card |
### 3. Fitting: the rule, in this order
A line starts when its segment (or the first of its span) starts, after a
0.15 s lead-in. The span must last at least the line's duration plus a 0.35 s
tail. When it does not:
1. **Cards stretch for free**: hold the card as long as the line needs.
2. **Takes hold their last frame** for the shortfall, and a montage group
holds its last clip's last frame. Report every hold longer than 1.0 s.
3. Before accepting a hold longer than about 1.5 s on a take, try the
cheaper fixes, in this order, and report each one you used: (a) a global
`--length-scale` between 0.88 and 0.95 for the whole narration (pick ONE
value for all lines: the voice must not change speed mid-video); (b) trim
that line's pause markers (never below 0.15 s); (c) cut a few words from
that line, keeping the owner's meaning and his lead-with-what-it-is
phrasing; write the change back into `script.txt` and list every edited
line in the report with old and new text.
4. Never speed a take's frames up or drop frames: the captured motion is the
evidence.
The total run will grow; that is expected. Print the new duration.
### 4. Captions and cards
Replace every take's captions and the montage captions with the narration
line's CHUNKS: each chunk appears in the band at its start offset (from
`timing.txt`) and stays until the next chunk or the line's end plus the tail.
A chunk that is a fragment (a sentence split by a mid-sentence pause) may be
joined with its neighbour so the band shows whole sentences: join chunks
until a sentence-ending mark, and show the joined sentence from the FIRST
chunk's start. Keep the band's look. Cards: the "Close, but no" card's text
becomes the script's `answer` line (big) with nothing below; the other cards
keep their text unless it contradicts the narration (check each against its
line; the closing card keeps its foot line "controller.lua has not changed..."
as on-screen text even though the narration no longer says it). The chips
("juice off", "head spring 2 Hz") stay.
### 5. Mixing
The audio track: 22050 Hz mono from the take, placed at each line's start on
a silent timeline of the full video length, loudness-normalised once as a
whole (`loudnorm` on the assembled track, not per line), encoded AAC 128 kb/s
into the mp4 with the video (same H.264 settings as the silent one; keep the
raw-RGB pipe: write the audio track to a temp wav and pass it as a second
ffmpeg input with `-shortest` off and `-map` both). Under 25 MB.
## Interfaces / scope
May touch: `tools/explainer/assemble.py`, `tools/explainer/narrate.py`,
`rounds/08-narration/script.txt` (only per 3c, every edit reported),
`rounds/08-narration/take2/` (new), `rounds/07-explainer/explainer-narrated.mp4`
(new), `rounds/07-explainer/contact-narrated/` (new, gitignored: add it to
`.gitignore`), the CLAUDE.md explainer section (a paragraph on narration).
READ ONLY: everything else. `explainer.mp4` (the silent one) must be
byte-identical afterwards. `look_tuning.lua` untouched (no capture runs).
## Stop conditions
A line whose segment cannot be found; Piper failing on a chunk; the mix
drifting (a line audibly starting on the wrong shot in your own check);
anything requiring re-capture.
## Verification
python tools/explainer/narrate.py take2 --length-scale <chosen>
python tools/explainer/assemble.py --narrated # or however you expose it
ffprobe rounds/07-explainer/explainer-narrated.mp4 # video 1280x720 60fps + aac audio, duration, size
cmp rounds/07-explainer/explainer.mp4 <a copy taken before you started> # unchanged
git status --short
Then check sync yourself: for at least six lines (plain, ik, grips,
spring-soft, style-fall, tuner) extract the frame at the line's start time
and at its end and Read them: the caption sentence on screen must be the one
being spoken (the timing file says which), the shot must be the one the line
names, and no hold longer than reported. Extract the audio around one shot
boundary (`ffmpeg -ss ... -t 3`) and confirm with ffprobe/loudness that speech
starts after the boundary, not before.
## Report format
1. Files changed/created. 2. The length scale chosen and why; every pause
trim and every word edit (line, old, new). 3. The hold table: segment, visual
seconds, line seconds, hold applied. 4. New total duration and size; the
ffprobe lines. 5. The six sync checks and what they showed. 6. Stopped /
partial. 7. Noticed.I'll start by reading the brief in full.
ReadC:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\emojunky-narrated-video.md13:02:01Output not recorded
C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\emojunky-narrated-video.mdBashls -la "C:/Users/a327e/Desktop/a327ex/emojunky/rounds/07-explainer/" 2>&1 | head...13:02:01Output not recorded
ls -la "C:/Users/a327e/Desktop/a327ex/emojunky/rounds/07-explainer/" 2>&1 | head...Thinking13:02:05
I'll start by making a copy of explainer.mp4, then read through the key files using Bash.
Let me take the safety copy first, then read the key files.
Bashmkdir -p "C:/Users/a327e/AppData/Local/Temp/claude/C--Users-a327e-Desktop-a327ex...13:02:10Output not recorded
mkdir -p "C:/Users/a327e/AppData/Local/Temp/claude/C--Users-a327e-Desktop-a327ex...Bashcat "C:/Users/a327e/Desktop/a327ex/emojunky/tools/explainer/narrate.py"13:02:10Output not recorded
cat "C:/Users/a327e/Desktop/a327ex/emojunky/tools/explainer/narrate.py"Bashcat "C:/Users/a327e/Desktop/a327ex/emojunky/tools/explainer/assemble.py"13:02:10Output not recorded
cat "C:/Users/a327e/Desktop/a327ex/emojunky/tools/explainer/assemble.py"Bashcat "C:/Users/a327e/Desktop/a327ex/emojunky/rounds/08-narration/script.txt"13:02:10Output not recorded
cat "C:/Users/a327e/Desktop/a327ex/emojunky/rounds/08-narration/script.txt"Thinking13:02:16
I'm checking the CLAUDE.md section on "The X-ray and the explainer video" and reviewing take1 durations, then looking at the manifest for shot names and counts.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "X-ray\|explainer" .claud...13:02:17Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "X-ray\|explainer" .claud...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && ls rounds/08-narration/ && echo "...13:02:17Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && ls rounds/08-narration/ && echo "...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '545,620p' .claude/CLAUDE....13:02:17Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '545,620p' .claude/CLAUDE....Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/explainer/assemble.p...13:02:17Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/explainer/assemble.p...Thinking13:02:28
I realize the manifest resets shot indices when it sees index 1 again, and the duplicate entries from `uniq -c` mean shots like ik and spring-off were retaken, so I need the later counts as the true ones — I should pull actual per-shot frame counts from `read_manifest` in assemble.py. I also notice the build montage only lists a handful of builds like build-a, build-a4, build-a4b2, and build-a4d.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python -c " import sys, os sys.ar...13:02:31Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python -c " import sys, os sys.ar...Thinking13:05:26
I'm mapping each line to its segment durations at length_scale 1.0, checking whether the audio timing fits within the allotted visual seconds for the question card and plain-text segments.
Continuing through the remaining lines, several segments run over budget—points, ledge, spring-soft, and spring-stiff all need noticeably more hold time than currently allotted, so I'm flagging those as ones that'll need padding or timing adjustments.
Still checking style timings, several entries need extra hold time to hit the target duration — style-run and style-slide are notably short and need over 3 seconds of padding, while style-hang barely scrapes by.
Given how many holds exceed the 1.5 second threshold, I'm thinking through cheaper fixes before accepting them individually: applying a global length-scale adjustment somewhere around 0.88–0.95, or trying an alternate approach.
I realize length_scale only affects Piper's speech synthesis, not the fixed-duration silences the script inserts or the sentence_silence gaps Piper adds independently — so scaling down speech alone won't fully close these gaps, and I need to estimate the actual savings per line accounting for that distinction.
I should try the cheaper fixes before resorting to trimming the owner's words, since that's meant to be a last resort that preserves meaning. Let me reconsider whether the hold is even really a problem, checking the brief's guidance: only after exhausting the cheaper options should I accept a hold over 1.5s and report it, and any word-cutting needs to stay conservative and true to the owner's intent.
I need to pick a length scale between 0.88 and 0.95 — faster helps fit more holds but risks sounding rushed, so I'll test 0.90 as a balance and check the fit table, falling back to 0.88 if too many big holds remain. I also want to verify whether this Piper build actually supports a `--length_scale` CLI flag before relying on it.
Now I'm planning the structural changes to narrate.py and how timing data should be written — designing a tab-separated format with per-line totals and per-chunk start times so it's easy to parse later.
For assemble.py, I'm sketching a new narrated mode that reads that timing file, maps line ids to segments, and builds a frame plan with holds instead of relying on the existing caption-based segment splitting. Each script entry needs to map onto a span of frames derived from the chunk timings rather than fixed caption boundaries.
For each line, I need to compute the required span as lead-in (0.15s) plus line duration plus tail (0.35s), then compare against the available visual material. Cards can stretch freely to match whatever duration is needed, while takes or montages need to hold their last frame if the visual material runs shorter than the required span, with audio starting after the lead-in offset. Silent segments like the title card stay unchanged, and I still need to work out how captions render as joined sentences with their own start/end timing for takes.
Captions should start right at the span's beginning rather than after the 0.15s lead-in, since delaying the first caption would create an awkward gap before any text appears — so the first sentence covers the lead-in period too. For montages with grouped action styles, each style group gets a single caption line while its constituent clips play in sequence underneath.
The tricky part is that each clip carries its own chip label, but captions and chip changes don't align at the same frame boundaries. The cleanest fix is to restructure the encoding to work over a flat sequence of frame units — each combining a clip's row data, caption text, and chip text — by intersecting the clip boundaries with the caption boundaries so I can emit correctly merged runs.
I'm planning a unified `narrated_units()` function returning either card units or shot units (with rows, caption, chip, and band width), where held frames just repeat the last row — this lets me cache rendered output for identical repeated frames while still handling per-frame variation for takes.
Since re-opening images for every held frame is slow, I want to add a memo cache in encode keyed on (row path, crop, caption, chip) to reuse bytes cheaply. Now I'm mapping out the actual segment-to-line assignments for the assembly script — matching question, plain-take, answer, box/points/limbs/ik takes, and targets/ledge cards to their corresponding script entries.
Finishing the mapping down through grips/feet, springs, bounce, juice variants, styles, builds, tuner, and the closing card — I plan to implement this by adding a `line=` kwarg to each SCRIPT entry, plus a join marker to handle spans across multiple takes, storing the line id directly in the card/take/montage dicts.
Simplest approach: consecutive SCRIPT entries sharing the same `line` id form a single span, so ledge+wall share line="ledge", bounce-low+bounce-high share line="bounce", and juice-land-off/full share line="juice-land". For the styles montage, I'll group clips by their action key to derive a line id like "style-"+key, which naturally clusters consecutive same-action clips. I'm working toward a general algorithm that flattens SCRIPT expansion into blocks (cards or shots) each tagged with a line attribute.
I'm double-checking that `segments()`'s caption splitting doesn't apply in narrated mode since captions there come from narration, and I'm verifying every take type (plain, box, points, limbs, ik, ledge, wall, grips, feet, spring variants, bounce variants, juice variants, style/build montage, tuner) does have an associated line, confirming full coverage.
Now I'm setting the "Close, but no" card's big text to the script's answer sentence, wrapping it across two lines for the larger font, with no smaller text below, then going through the remaining cards to make sure their existing text doesn't conflict with the narration lines.
Checking the question card: it quotes the same rigidbodies-with-distance-constraint question as the narration, so it stays as is. For the targets card, the small text mentions pose table offsets and "the interesting ones come from the world," which overlaps slightly with the following narration line but isn't a real contradiction, so I'll leave it.
Moving to the springs card, the big/small text about points chasing targets through a damped spring matches the narration word for word, so that one's fine too. Now I'm looking at the juice card's opening line about a layer being added.
Checking the juice, styles, and builds cards against their narration next — juice mentions scaling by one master, styles describes a table of hooks rewriting targets per action, and builds is simply fourteen numbers. All three check out as consistent with their narration, so I'll keep them as is.
Now looking at the closing card: it lists a box, two points, four limbs, and a spring, plus a footer noting the controller code hasn't changed since the character was just an emoji face. The narration's shorter version matches, but the card's fuller phrasing is just an expanded version of the same idea, so they're consistent — though I need to check whether the brief wants the card text replaced by the script's wording or left as is.
The narration timing runs 13.4 seconds for take1 while the card's default duration is 7 seconds, so it stretches to about 14 seconds, which should be fine. The "answer" card gets replaced per the brief, and I confirm cards don't need caption bands since their own text serves that purpose, so the current setup where narration plays over card text stays as is. For the build-montage, the narration mentions "twelve bodies" even though only six build shots exist — that's an inherited discrepancy from the original caption, not something I need to fix since there's no re-capture happening.
For audio assembly, the brief wants a 22050 Hz mono track with each line placed at its start on a silent full-length timeline, loudnorm applied once to the whole thing, then encoded as AAC 128k. The complication is that narrate.py already converts each line to loudnormed ogg and deletes the intermediate wav, but for proper mixing I need the raw, un-normalized PCM per line — so I'll need to either preserve those wav files or decode the ogg back to get clean audio for the final mix.
I'm weighing whether to modify narrate.py to keep the raw wavs alongside the oggs, which would preserve its existing outputs while adding raw audio for take2, though that means take1 won't have wavs since I'm only rendering take2 anyway. I'm also considering whether keeping ~11.5MB of raw wav files in the ungitignored narration directory is worth the repo bloat.
I'm leaning toward having narrate.py write per-line raw wavs into a `raw/` subdirectory under the take folder, since the existing `.gitignore` pattern for `rounds/*/*/raw/` should already cover that path.
A fresh clone would then need to rerun narrate.py to rebuild the narrated video, but that's consistent with how frames are handled. I'm also weighing whether to just decode the per-line `.ogg` files instead, but stacking loudnorm on already-loudnormed audio seems like exactly what the brief warns against.
Better to normalize the whole track once from raw wavs — that's the cleanest approach. For loudness targets, the default ffmpeg loudnorm setting is too quiet for video, so I'll use the standard streaming target of -16 LUFS with true peak and loudness range constraints instead, and note that as a deliberate deviation from narrate.py's defaults.
For caption timing, since each chunk records its start offset in the accumulated PCM stream, and Piper adds trailing silence after each sentence, captions will naturally shift slightly late to align with the next sentence's start — which actually reads as more natural. I'm also considering joining fragment chunks that got split mid-sentence so captions display complete sentences rather than choppy fragments.
Checking `spring-off` gives two captions correctly. `close` and `question` are cards, so no captions apply there, which is fine. I still need to handle lines with trailing ellipses like "A landing off..." properly, since "..." counts as a sentence end, so I need to trace through the `juice-land` chunk boundaries carefully.
For `juice-land`, splitting on sentence ends gives "A landing off..." as caption 1 and "and on: the hip dips, the head bounces." as caption 2, with the 0.9s pause landing nicely between them. Timing the caption 2 shift against the shot boundary at 2.5s, it lands about 0.15s before the cut — close enough to be acceptable.
Now checking the ledge/wall span: three sentences split into three captions across ledge (4.33s) and wall (2.17s) shots. Estimating chunk timing at scale 1.0, caption 3 likely starts around 6.5s, well after the wall shot actually begins at 4.33s, so there's a lag that a hold would need to cover.
Since holds are applied at the end of a span rather than redistributed per shot, the wall shot ends at 6.5s and the hold covers 6.5–9.61s — meaning caption 3 ("On a wall, the wall face") appears right as the wall footage freezes, which isn't ideal timing-wise. I'm weighing whether per-shot hold redistribution is within scope, but the brief's stated rule only covers holds at the span's end, so I should stick to that constraint.
I'm also noting the `ledge` hold runs 3.11s at scale 1.0 — well over the 1.5s threshold — so it needs a cheaper fix, and I'm debating whether letting the first take in a multi-take span hold (rather than always the last) would be a more natural approach, though that would deviate from the brief's literal wording.
Checking the "bounce" pair reveals a real sync issue: with "High, it rings" timed against bounce-high, the line lands right as that clip ends, which the brief's literal hold-the-last-frame rule doesn't fix — so I'm reconsidering whether lines should instead start when their segment begins, after a short lead-in.
For multi-take spans, deciding which take should hold the shortfall is genuinely ambiguous since there's no automatic way to know which caption belongs to which take; holding the last take seems like the only clean automatic rule, though it may still break bounce-type sequences.
Actually, distributing the shortfall proportionally across each shot's boundaries might work better: for the bounce case, splitting the 2.31s shortfall evenly gives each shot about 1.16s, moving the "high" caption boundary to land inside the correct shot. Applying the same proportional logic to the ledge case, splitting by each shot's relative share, also produces boundaries that line up correctly with where the captions should fall.
I'm weighing whether this proportional-split approach still counts as "holding the last frame for the shortfall" per the brief, or if it's overstepping. I think it's a reasonable interpretation within "details are yours to decide," since it meaningfully improves sync — and sync is exactly what the stop condition about lines starting on the wrong shot is protecting against. I want to find a simple, defensible rule: something like allocating each shot's portion in...
Let me trace through the juice-land example — checking short segment timings, shortfall calculations, and where the internal cut lands relative to the narration midpoint to make sure it doesn't push a line onto the wrong shot.
Actually, comparing without holding versus with proportional distribution: proportional helps some spans (bounce, ledge) but actively hurts juice-land, since it moves the cut ahead of where the narrator says "and on." So the fix needs to align the internal cut to whichever chunk actually belongs to the second shot, and that chunk index differs per span (chunk 2 for juice-land, chunk 3 for bounce and ledge).
I'm now thinking the cleanest solution is to explicitly annotate a `split_at_chunk` value on the second take for each of the three spans, so the cut lands right at that chunk's start (with maybe a small pre-roll). This feels like a small, defensible detail decision rather than overstepping the brief, since the fitting rule only governs span length, not internal cut placement.
Let me also reconsider aligning cuts on sentence boundaries instead: for the ledge span, sentences 1+2 map to the ledge take and sentence 3 to the wall take; for bounce, the first two sentences map to bounce-low and the third to bounce-high; for juice-land, one sentence maps to each of the two takes.
That pattern always puts the final sentence with the final take and everything else with the first take, but with only three examples I don't trust it as a general rule, so I'll make it explicit instead — adding a "split" key that names the caption-sentence index where the next take begins, so it's visible and reportable in the script. For implementation, take boundaries align to caption-sentence start times, with a take holding its last frame if its slot runs longer than its footage — but if the slot is shorter than the footage, I'd need to trim frames, which conflicts with the rule against speeding up or dropping frames.
I'm weighing whether trimming a take's tail counts as "dropping frames" under that rule — it might just mean don't resample, but cutting a take short does change what's shown, so I want to check actual numbers rather than guess. If a slot turns out shorter than the footage, I'll fall back to the original behavior: the take plays in full and the next one starts afterward, with no trimming — meaning the boundary is whichever is greater between the slot and the footage length.
So for each take in a span except the last, the slot equals the max of its footage or the remaining time until the next split; the final take absorbs whatever shortfall remains by holding. If a split isn't explicitly annotated, I'll default to the brief's literal rule rather than a proportional split, and I still need to figure out whether clips inside a multi-clip montage group should be re-timed to match caption timing.
The brief is explicit that a montage group just holds on its last clip's last frame rather than retiming individual clips. Now I'm considering cases where the narration line is shorter than the visual duration across several takes — the clip plays in full while narration starts at 0.15s and finishes early, and I need to decide whether the caption should persist until the span ends or disappear once the line ends, since leaving a gap with no caption for over a second would look off.
I'll keep the last caption visible through to the end of the span and note this as a detail. Title cards run 3.0s with no narration, and since the brief doesn't mention gaps between lines explicitly, those fall out naturally from per-segment audio placement — similarly, cards with lines shorter than nominal duration just stay at whichever is larger. I'm now working out the overall total runtime by summing the max of visual duration versus line-plus-tail across all spans.
For narration timing, each line starts 0.15s after its span begins, applying the same lead-in rule to cards as well. I also need to figure out whether the narrated assembly should be a separate `--narrated` flag on assemble.py with its own output path and contact sheet directory, and I should check the explainer tools folder for an existing contact-sheet script.
I also need to verify `piper.exe --help` for the `--length_scale` option, and update narrate.py so it accepts a positional take argument (defaulting to take1) plus an optional `--out` override, alongside checking for the contact sheet tool.
Bashls -la "C:/Users/a327e/Desktop/a327ex/emojunky/tools/explainer/"; echo "=== cont...13:05:27Output not recorded
ls -la "C:/Users/a327e/Desktop/a327ex/emojunky/tools/explainer/"; echo "=== cont...Thinking13:05:44
Good, `--length_scale` exists. The contact sheets look like ad-hoc ffmpeg extracts from a previous implementer rather than a committed script, so I'll set up a contact-narrated/ directory with my own verification frame extracts, keeping in mind the __pycache__ directory is already gitignored. I should check the git status baseline before writing the narrate.py changes.
For scale selection, rendering at 130-ish piper invocations should take a few minutes, so rather than doing multiple full renders to tune it, I can render once at 0.90, then use that single data point plus the existing 1.0-scale durations to solve for the fixed silence component versus the speech component per line, letting me predict durations at other scales without re-rendering.
Now I need to redesign narrate.py: add argument parsing for the take name, an output override, and a length-scale flag, while keeping the gap handling, full narration output, and durations file, and writing raw per-line wavs plus a timing file recording id, duration, chunk start, and text.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && git status --short && echo "=== b...13:05:45Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && git status --short && echo "=== b...Thinking13:05:47
Good, the narration round and narrate.py are confirmed as untracked new work. Now I'll write the new narrate.py file.
Now I'll extend narrate.py with timings, a length scale, and raw per-line wavs.
WriteC:\Users\a327e\Desktop\a327ex\emojunky\tools\explainer\narrate.py13:06:10Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\explainer\narrate.pyThinking13:06:13
I'll start a background render of take2 at 0.90 speed so I can compare its duration against take1's at 1.0 and build a linear model for the length scale, while continuing work on assemble.py in the meantime.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/explainer/narrate.py...13:06:14Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/explainer/narrate.py...Thinking13:07:34
While that runs, I'll start writing the narrated assembly logic in assemble.py, setting up output paths, timing offsets, and adding a line parameter to the script entries so card() can pass narration text through.
I need to figure out how line IDs map for montage clips versus style clips, then decide the cleanest approach is writing a fresh narrated_units function that reuses existing helpers like read_manifest, band, chip, and encode rather than reworking the existing segments() logic — I'll build a new blocks() function that flattens the script without splitting by captions.
Writing block-building function...
Next I need to group consecutive blocks sharing the same line into spans, then parse a timing.txt file to extract durations and chunk data per row.
Then I'm grouping chunks into full sentences by joining text until terminal punctuation appears, being careful that ellipses and stray colons don't falsely trigger a sentence break. After that, I'll compute the frame counts needed for each span based on timing.
Still computing frame ranges...
For captions, I'm mapping each shot block's frame range back onto the span's sentence timeline, so at any given frame the caption shown is whichever sentence's start time has most recently passed.
I also need to split blocks into runs of constant caption and handle hold frames by repeating the last row when a block runs longer than available rows — and I should memoize repeated identical images during encoding so I'm not reloading the same PIL image hundreds of times.
For cards, there's no caption band, just the computed frame count. For audio, I'm figuring out start frames and sample positions for each spoken line, reading the raw wav files, and placing them into a buffer sized to the total duration before writing a temp wav for ffmpeg. Since spans are spaced far enough apart that lines shouldn't overlap, I'm considering whether to just assign samples directly or add them with a clipping guard, and I'm leaning toward avoiding numpy and using the built-in array module instead in case numpy isn't available.
I'm settling on using a bytearray as the silence buffer and doing direct slice assignment for each line's PCM bytes at its computed sample offset, asserting no overlaps for safety since this is simple and fast. Then I'm putting together the ffmpeg command that takes raw video frames from stdin plus the audio wav as a second input, mapping video and audio streams, encoding with libx264 and yuv420p, and applying loudnorm for audio normalization.
I'm correcting myself to use `-filter:a` instead of `-af` and skipping `-shortest` since the audio track is already exactly matched to video length. For the temp wav file, I'm deciding to write it alongside the output rather than in system temp, planning to clean it up afterward since assemble.py should behave as a general-purpose tool.
Checking file size estimates: with narrated audio adding roughly 4 MB at 128 kb/s, and video encoding staying cheap thanks to duplicate held frames, the total should comfortably land under the 25 MB cap even at low crf values.
I'm also realizing the answer card text change needs care — if I edit SCRIPT directly, that would alter the silent video's definition too, changing it if re-rendered, even though the brief only wants that text update applied to the narrated version. Better to keep SCRIPT as the silent video's source of truth and apply the narrated-specific wording as an override rather than a shared edit.
Now I'm working through the timing table for each card, matching frame counts and durations across the silent and narrated cuts — noticing the plain take only uses 480 of 600 available frames in the silent build, so I need to reconcile that against the ~9.1s target for the narrated version.
That's better than freezing and uses no new capture, so I'll adopt a principled rule: a hold never applies while unshown captured frames of that same take still remain, meaning narrated mode can use a take's full captured length before any freeze kicks in. I'll apply this generally, since only the plain cut trims at/n, and report it accordingly.
Now I'm mapping out each shot to its narration line, noting where splits are needed, like the wall shot pulling its third sentence about the wall face from the ledge line.
I'm double-checking sentence splits for ledge, bounce, and juice-land lines, confirming the split counts of 3, 3, and 2 respectively line up correctly with the sentence boundaries.
I'm also considering how captions swap in narrated mode versus silent mode across the montage and wall takes, deciding to leave chip behavior unchanged for the plain take, and now moving to write the narrated code block after the segments function.
I'm restructuring `main()` so `--narrated` bypasses the silent path entirely, resolving the output path default separately for narrated vs silent runs, and adding an audio parameter to the encode step. I also need to nail down how caption chunks appear at their start offset and persist until the next chunk or line end.
For the trailing gap when a visual outlasts its line's audio, I'm deciding to keep the last caption visible through the extra span rather than let the band flicker off. Now I'm adding a memoization check in the encode loop keyed on path, crop, and image identities so repeated frames can reuse cached bytes.
Using ids risks collisions if objects get garbage collected and reused, so I'm switching the cache key to the actual caption and chip text instead, since the band cache keeps the source images alive anyway. This memoization mainly benefits the consecutive-hold case where rows repeat identically. Writing the patch now.
I also need the audio buffer to match total video length exactly, computing sample count as total_frames/FPS*RATE rounded. And for the narrated card override, setting "small" to None in the merge dict works fine since make_card treats it as falsy and skips it.
Now the narrated assembly. Let me patch assemble.py.
EditC:\Users\a327e\Desktop\a327ex\emojunky\tools\explainer\assemble.py13:07:39Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\explainer\assemble.pyThinking13:07:41
Take2 rendered, so now I want to check the output and compute the fit table to decide the length scale, while continuing with the assemble.py edits.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && cat "C:/Users/a327e/AppData/Local...13:07:43Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && cat "C:/Users/a327e/AppData/Local...Thinking13:09:11
I'm noticing a discrepancy in line counts between the two takes—35 versus 36—and double-checking whether the paired rows actually align correctly by counting through the script's individual sections.
The bigger issue is the duration ratios: `limbs` drops from 11.69 to 6.12 and `close` from 13.40 to 7.18, which are roughly 48% cuts, far beyond what a 0.9 speed scale should produce. Estimating word counts and typical speech pacing for these lines, take2's durations actually seem more plausible, which makes me suspect take1's original timings were inflated rather than take2 being broken.
This points to take1 having been rendered from an earlier, longer version of script.txt before the owner trimmed the lines, meaning take1 isn't a reliable 1.0x baseline for comparison. I'll set that aside and just evaluate take2's 0.90 speed directly against the actual shot-length requirements, working through the target durations for each segment like box, points, limbs, ledge/wall, grips, feet, and the spring/bounce shots.
Continuing through the rest of the shot durations — juice-run, juice-land, juice-breath, juice-rope, then the various style clips (walk, run, jump, fall, hang, slide, rope, crouch) multiplied by their frame counts, plus the build montage and tuner totals.
Now I'm checking each line against its required duration versus visual length, flagging holds where visual time exceeds required — points and ledge both show slack that needs trimming, while ledge is flagged as concerning since the gap is largest there.
The spring variants stand out too: spring-soft and spring-stiff both have big excess holds (2.5s and 2.1s over), same with juice-run-full sitting nearly 2s over its requirement — these need tightening.
Looking further down, most of the juice and style tests are passing fine (juice-land, juice-breath, juice-rope, style-jump, style-fall all check out), but style-run has a notable 1.78s excess I should flag.
At the 0.90 threshold, I count six lines still exceeding 1.5s: ledge, spring-soft, spring-stiff, juice-run-full, style-run, and style-slide, so those need cheaper fixes. I also notice `plain` with the silent 480-frame cut already fits under 8.0 seconds, so I can drop the full-take extension.
Pushing the global length scale further to 0.88 only saves a negligible amount, not enough to fix a 2.5s overage on its own, so I'll need to also trim pause markers down to 0.15 as a second lever.
For the spring-soft line, even trimming pauses to 0.45s total only gets duration to 5.64s against a required 6.14s, leaving hold time still over 1.5s — I'll need to cut words too, like dropping "Same jump," to save more time, though I'm now wondering if I should reconsider the shot length itself.
Actually, since spring-soft is fixed at 4.167s (only 250 frames exist, no looping allowed per the brief), a 2-second hold freeze is unavoidable unless I trim aggressively. My realistic plan for these six shots: trim pauses, cut words where possible, then accept whatever residual hold remains and just report it honestly, aiming to keep holds under roughly 1.5s where feasible.
I need to pull precise per-chunk durations from timing.txt so I can judge exactly how much text I can trim without mangling the owner's wording — re-rendering all shots takes about 4 minutes, so I can afford 2-3 iterations if I plan the cuts carefully first.
For the speed factor, I'm weighing 0.88 versus 0.90: the difference is marginal (about 0.11s on a 6s line) and risks sounding rushed, while 0.90 gives a natural-brisk pace that clears most of the timing shortfalls. I'll settle on 0.90 as the single value across all lines.
I want to double-check this by working through the linear duration model — fixed overhead plus speech time scaled by the factor — using the chunk timings from a sample render to see exactly how much silence Piper adds per sentence.
Running the numbers for both a plain line and a spring-soft one, dropping the scale from 0.90 to 0.88 only saves about 0.1 second in each case — not enough to matter. I'll keep the scale at 0.90.
Now I'm moving on to designing edits for the six problem lines, aiming to preserve the owner's meaning and his "lead with what it is" phrasing style, pulling exact chunk durations from timing.txt for each. For the ledge line specifically, I'm trying tightening the pauses from 0.4 to 0.3 seconds to cut enough time and bring the hold comfortably under 1.5 seconds, and considering a small additional word cut if needed.
I'll stick with the pause trim only for the ledge line since the brief prefers preserving wording where possible, and the resulting hold of 1.06 is acceptable.
For the spring-soft segment, trimming pauses alone only brings the hold down to 1.97, still above the 1.5 threshold, so I'll need to cut a few words from "Same jump, one number: a soft head spring. The head trails, then overshoots." while keeping the owner's meaning intact.
That gets under 1.5 and stays consistent with the stiff-line variant, which already drops "same jump" too. Still, "one number" carries the video's whole thesis, so I'd rather trim somewhere else than lose that phrase — the closing line "The head trails, then overshoots" can't be shortened further. I'll hold off on a final call until I have exact chunk durations.
For spring-stiff, trimming pauses from 0.7 to 0.3 and cutting "just" from the last sentence gets the hold down to roughly 1.5, right at the edge — marginal but workable.
Moving to juice-run-full: trimming pauses saves about 0.25, leaving a required hold of 1.69, so I'm looking at cutting words from "a stretch along the motion" to close the gap further.
For style-run, tightening pauses from 0.7 to 0.3 saves 0.4, landing at a 1.38 hold which fits under the 1.5 threshold. Now checking style-slide's pause structure to see if it clears the same bar.
Trimming the pauses there only gets it to a 1.98 hold, still over target, and the line is already too minimal to cut further without losing meaning—with only two 1.1667s clips, the shortfall looks structural rather than fixable through wording. I'm starting to think I need to step back and reconsider my whole approach to montage timing.
So the practical plan is: apply pause trims across all six lines, then only attempt word cuts on those still exceeding 1.5s afterward, accepting and reporting whatever residual holds remain. After trims, ledge and style-run come in under target, but spring-soft, spring-stiff, juice-run-full, and style-slide still need word cuts, with style-slide unlikely to improve much. I also want to flag the borderline cases sitting between 1.0 and 1.5s for the report.
I'll leave points at 1.03 as-is since it's below the 1.5 threshold that triggers fixes, just noting it in the report, and I'm confirming that pause trims should only be applied to the six flagged lines rather than globally. To ground my word-cut estimates, I want to pull exact chunk durations from the timing data, though the more reliable approach would be rendering a quick test to measure directly — each full render takes about 4 minutes, so I could manage two iterations, or better yet, set up a lightweight throwaway script to render just the edited lines faster.
I'm dumping chunk durations for the six affected lines from timing.txt to get precise numbers before finalizing script.txt and doing a full re-render of take2.
Let me analyze the fit precisely before deciding edits.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PY' import re rows=[l...13:09:14Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PY' import re rows=[l...Thinking13:10:25
Each chunk's total time equals speech duration plus 0.25s sentence silence plus the pause value, so I can work backward from that to figure out minimum durations for something like style-slide, which needs 2.33s of visual time with a duration constraint.
Computing the speech durations for "Slide," "Hand and foot on the wall," and "the rest is style" shows the total comfortably exceeds even the minimum allowed time, meaning this chunk will have to hold regardless of pause settings. I consider trimming "the rest is style" to save time, but that clause carries the owner's key point about style controlling everything else, so cutting it risks losing meaning beyond what "a few words" implies. Instead I try merging chunks to eliminate a redundant sentence silence and pause, which helps but still leaves the hold time too high, and merging would also affect how captions are displayed.
For a two-clip montage group like the slide sequence, since a wall-slide is already a fairly static pose, I decide a roughly 1.6-2 second freeze is acceptable rather than trying to redistribute the hold across both clips -- the rule explicitly says montage groups hold on the last clip's final frame, so I'll stick with that and apply pause trims to bring the hold down to about 1.98 seconds.
The style-slide montage only has 2 clips versus 3-4 elsewhere, so the hold is structural — I'll accept it, flag it as the largest hold, and note in "Noticed" that a proper fix would be re-capturing with an extra style or longer clips, which is out of scope. I'll still try the word-cut per the brief's ordering, but conclude the line is already tight — three short clauses each carrying a fact the shot needs — so cutting would lose meaning, and I'll report that as the rejected cheap fix while applying pause trims instead.
Now I'm moving to the ledge shot: visual runs 6.5s but the clip is 7.56s, so trimming pauses from 0.4+0.4 down to 0.15+0.15 gets it to 7.06, leaving a 1.06s hold I'll report. Cutting "itself" from the line would shave it closer to 6.61s, but since the hold has to be reported either way at just over a second, I'd rather preserve the owner's wording and just do the pause trim, then I'll move on to checking the spring-soft shot's timing.
I need duration ≤5.17, so I have to save 0.46 more. Trimming "Same jump, one number:" down to just "One number:" saves about 0.55, bringing the hold to roughly 1.42, but it weakens the point about the same jump with one number changed. As an alternative, merging "The head trails," with "then overshoots." into a single chunk saves 0.40, landing at hold 1.57 — just barely over the target.
I try cutting "one number:" instead, leaving "Same jump: a soft head spring," which saves about 0.6 and gets the hold to 1.36. But "one number" is central to the thesis. I realize the thesis is actually reinforced elsewhere, in spring-stiff's line about the same jump being just two spring speeds, so I decide to cut "Same jump," from the spring-soft line since spring-off already establishes the same jump visually right before it.
I test the replacement: "One number: a soft head spring. The head trails, then overshoots." Then I weigh whether "One number:" reads too abruptly as an opener, and whether "One number changed:" restores clarity without costing too much time, landing around 5.43s and a 1.76 hold. I compare that against keeping "Same jump, one number:" versus trimming the tail wording instead, weighing "The head trails" against "It trails" for a slightly shorter, punchier close.
Moving to spring-stiff, I check that its current duration of 5.78s with two pauses can shrink by tightening pause gaps to save 0.40s, bringing it to 5.38s and a 1.71s hold — still slightly over target, so I cut the word "just" from the sentence describing the top-leads feel to shave another 0.25s, landing at 5.13s and a 1.46s hold, which fits without weakening the meaning.
For juice-run-full, I work through similar math: trimming pause durations saves 0.25s to reach 5.35s and a 1.68s hold, still 0.18s short of target. I consider shortening "the arms dragging," to just "arms dragging," but that's marginal, so I weigh merging the last two caption chunks instead, which would drop it to 4.95s and a 1.28s hold — though that changes the caption grouping structure, which needs more thought.
Actually, I realize these chunks form one continuous sentence with no terminal punctuation until the end, so merging them costs nothing at the caption level, since the whole clause is already one caption unit. The pauses are purely a delivery choice, so trimming them just adjusts the rhythm the writer intended — while merging chunks entirely would render the phrase as one natural continuous line in Piper rather than as separate synthesized segments.
I'm weighing whether to trim the pause to 0.15 and shave "the" from "the arms dragging," which saves about 0.18 seconds, but that puts the duration right at the boundary of the hold limit. Trying other cuts — "a stretch along the motion." can't be shortened, and "And on:" needs to stay for the pairing with juice-run-off — so I'm considering merging chunks 3 and 4 instead to drop a pause.
Actually, the brief says pauses can never go below 0.15, meaning a marker always has to remain, so I shouldn't delete markers entirely. I'll go with the 0.7→0.45 pause trim plus the word cut, landing close to 5.17 duration and roughly 1.50 hold, and if it's just barely over I'll accept it and report the number. Now I'm moving on to the "style-run" chunk, comparing its visual target of 3.75 against its current 5.03.
For style-run, trimming the pauses from 0.4+0.3 down to 0.3 saves 0.4, bringing it to 4.63 with a hold of 1.38, which clears the threshold. For style-slide, the same pause trim saves 0.4 and lands at 3.81 with a hold of 1.98 — I'll accept that and reject the word-cut option, though I keep second-guessing whether a 1.98s freeze is acceptable and briefly consider alternate phrasing tweaks that don't help. I'm now weighing whether merging two chunks together could save additional time by combining a sentence-silence gap with a pause reduction.
Since the caption for the style-slide already spans two chunks without a terminal mark, merging them costs nothing visually but would require deleting a marker below the 0.15 floor, which the brief disallows — so I'll drop that idea and report style-slide's hold as 1.98 with a note about the group only having two 1.17s clips. I'm still not fully settled on whether that near-2-second hold is truly acceptable or whether it needs flagging separately.
The brief actually anticipates holds like this and explicitly asks to report anything over 1.0s, so this is meant to be accepted and reported rather than treated as a stopping point. Checking the remaining holds — points (1.03), juice-land (1.34), style-walk (1.02) — all clear 1.0s but stay under 1.5, so they get reported without needing fixes, while bounce, spring-off, feet, grips, and build are all comfortably fine. Now I want to revisit the overall length-scale decision at 0.90 with these edits factored in, since the worst remaining holds are style-slide at ~1.98 and spring-soft at ~1.42.
Settling on 0.90 as the final length scale, I'm now drafting the actual script.txt edits — reworking the ledge line to clarify hand targets on corners versus wall faces, adjusting spring-soft to describe the head trailing then overshooting, tightening spring-stiff's description of the two spring speeds, and continuing into the juice-run-full edit.
Rather than committing blind and risking another 4-minute re-render if something lands wrong, I decide to probe just these six lines first with Piper in the scratchpad — a cheap way to verify the numbers before doing the full take2 render.
Actually, I settle on a simpler order: edit script.txt now with the pause trims, kick off the re-render in the background, and write assemble.py while that's running. I want to double check the `ledge` line specifically — trimming its pause markers to 0.15 will make the third sentence about the wall face start earlier, which should work well.
I have the numbers. Now the script edits (pause trims, then minimal word cuts where a trim isn't enough).
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && cp rounds/08-narration/script.txt...13:10:27Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && cp rounds/08-narration/script.txt...EditC:\Users\a327e\Desktop\a327ex\emojunky\rounds\08-narration\script.txt13:10:27Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\rounds\08-narration\script.txtEditC:\Users\a327e\Desktop\a327ex\emojunky\rounds\08-narration\script.txt13:10:27Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\rounds\08-narration\script.txtEditC:\Users\a327e\Desktop\a327ex\emojunky\rounds\08-narration\script.txt13:10:27Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\rounds\08-narration\script.txtEditC:\Users\a327e\Desktop\a327ex\emojunky\rounds\08-narration\script.txt13:10:27Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\rounds\08-narration\script.txtEditC:\Users\a327e\Desktop\a327ex\emojunky\rounds\08-narration\script.txt13:10:27Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\rounds\08-narration\script.txtBashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && diff "C:/Users/a327e/AppData/Loca...13:10:27Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && diff "C:/Users/a327e/AppData/Loca...Re-rendering take2 with the edited script while I write the narrated assembly.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/explainer/narrate.py...13:10:50Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/explainer/narrate.py...Thinking13:10:53
I'm now moving to assemble.py to add narrated assembly, starting with `line=` annotations on the SCRIPT entries, since the `card()` and `take()` helpers already pass keyword arguments through.
Now the SCRIPT annotations — which line plays over which segment.
EditC:\Users\a327e\Desktop\a327ex\emojunky\tools\explainer\assemble.py13:10:58Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\explainer\assemble.pyBashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PY' import io, re, os...13:10:58Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PY' import io, re, os...Thinking13:11:19
I realize the Bash tool heredoc halves backslashes, so my escaped `\\n` collapsed into an actual newline instead of the literal two-character sequence I intended—that's the trap causing the mismatch. I'll write the patch script to a file directly instead to avoid this escaping issue.
WriteC:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\annotate.py13:11:36Output not recorded
C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\annotate.pyBashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python "C:/Users/a327e/AppData/Lo...13:11:36Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python "C:/Users/a327e/AppData/Lo...Thinking13:12:17
I'm adding a narration section to assemble.py, setting up output paths and take directories for the narrated explainer video.
Now I'm writing a `read_timing` function to parse timing.txt files with line and chunk timestamps, and a `sentences` function to group chunks into full sentence spans for display.
Building the narration block logic...
Slicing rows into the requested range and building output blocks, then I'm grouping blocks into spans by consecutive matching line values, being careful with the mutable tuple structure.
Now I'm working out how to fit narration into timed units: computing frame counts for each shot, walking through spans, and for lines without narration just appending units directly while advancing the frame counter, then handling narrated lines by looking up their duration and splitting into sentences to fit the required frame count.
Confirming the split index logic works, then figuring out hold frames and audio start offset. Now I'm working through how to build caption runs by finding the boundary cuts within each block's frame range...
I accumulate elapsed frames per span to compute each narration's start time with lead offset, then keep the unit format consistent for encoding. Now I'm writing a function to build the narration audio track by reading each narration wav file and placing it into the buffer at its computed start frame.
Writing the ffmpeg encode command...
I also need to handle main() adding the narrated flag, take, and out arguments, picking output paths and unit sources based on whether it's narrated, plus writing the temp wav via tempfile for narration. I'll cache frame lookups for holds in encode, then use the Edit tool to patch both main and encode together.
Now the narrated build itself.
EditC:\Users\a327e\Desktop\a327ex\emojunky\tools\explainer\assemble.py13:12:58Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\explainer\assemble.pyThinking13:13:01
The take2 re-render is done. Now I need to finish patching assemble.py by adding the wave import and updating main(), so I'm checking the current imports and main() function to see what needs to change.
EditC:\Users\a327e\Desktop\a327ex\emojunky\tools\explainer\assemble.py13:13:02Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\explainer\assemble.pyEditC:\Users\a327e\Desktop\a327ex\emojunky\tools\explainer\assemble.py13:13:02Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\explainer\assemble.pyThinking13:13:25
I'm verifying that the default output path still resolves correctly after the change. Rather than running the full encode to check the narrated plan, I should write a quick script that imports the assemble module directly and calls the narration function to inspect the plan without waiting minutes for encoding.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PY' import importlib....13:13:28Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PY' import importlib....Thinking13:13:58
The plan works out to 222.32 seconds total, about 3:42 versus 3:21 silent. I'm checking the ledge hold, which came in at 0.83 because the split forced a wait for the third sentence, and verifying that the wall's frame count exceeds its required threshold by calculating the ledge span needed at roughly 7.31 seconds, or 439 frames, against its n value of 260.
I'm working through the math for the ledge and wall segments — the ledge take ends up holding at 310 frames while the wall plays in full for 440 frames, matching the caption cut timing exactly at the wall shot transition. Checking similar logic for bounce-low (holds 1.45s) and bounce-high (plays full), then verifying juice-land-off's timing against sentence 2's start — confirming the cut happens at 150 frames (2.5s) with the caption appearing slightly before, which seems acceptable.
I'm now tallying hold durations across several other takes — style-walk-teeter, style-run-piston, style-slide-eagle, points, spring-soft, spring-stiff, and juice-run-full — and noticing juice-run-full comes in at 1.63s, a bit over the 1.5s target the others hit. I'm considering whether to trim it further with another word cut to bring it under that threshold.
1.63 is close enough to the "about 1.5" guidance to accept, and I've already tried the cheaper fixes on that line, so I'll report it as is. For style-slide's 2.00 s hold, I've also exhausted the easy trims, and cutting further would mean dropping one of the line's two facts, so I'll report it as the largest hold with the reasoning that the group only has 2.33 s of footage for a 3.83 s line. Now I'm double-checking that the hold for a style montage group falls on its last clip, and recalculating the facing+eagle group's frame totals to confirm that reasoning.
I'm testing whether dropping the length scale to 0.88 would meaningfully shave the worst holds, but the savings are negligible (only fractions of a second), so I'll stick with 0.90. Next I want to verify the caption sentence assignments by checking the actual output.
I should confirm the question card starts narration at 3.15s and spans through 11.48s, and check the answer card timing around 19.77s to make sure everything lines up. Let me also verify the captions for key spans like ledge/wall, bounce, juice-land, style-slide, spring-soft, and tuner, plus double-check the close card duration and overall total before moving to encode.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PY' import importlib....13:14:01Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PY' import importlib....Thinking13:14:17
The timeline checks out. I notice a couple of tiny sliver units (0.42s, 0.05s, 0.01s) where a caption changes right before a clip boundary — but those reflect correct behavior since the caption genuinely changes mid-clip, so they're not bugs, just extra units.
Looking at bounce and ledge, the captions align well with cuts: "High, it rings" starts exactly at the bounce-high cut, and "On a wall, the wall face" lines up with the wall cut. For juice-land, the phrase "and on:" begins about 0.4s before the cut to the ON clip, which is a normal lead-in and not a problem in practice.
I'm leaving that alone since forcing an earlier cut would drop frames from juice-land-off. Now I need to verify card durations and that the answer card uses the narrated override, then move on to encoding — though with 13339 frames at preset slow, this could take a while, and I'll need to watch for the crf 12 output exceeding 25 MB and needing a fallback re-encode.
Given the narrated version has ~10% more frames but many are cheap frozen duplicates, the size should land around 10 MB total, so one pass should work. I'll kick off the encode in the background.
The plan is sound. Encoding now.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/explainer/assemble.p...13:14:18Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/explainer/assemble.p...Thinking13:14:23
While the encoding runs, I'll prep two things: a .gitignore entry for the contact-narrated folder and the CLAUDE.md paragraph on narration. I'll start with the .gitignore, checking whether rounds/08-narration/take2/raw/ is already covered by the existing wildcard pattern, and verify with git check-ignore before deciding how to handle rounds/08-narration/ itself.
EditC:\Users\a327e\Desktop\a327ex\emojunky\.gitignore13:14:24Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\.gitignoreBashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && git check-ignore -v rounds/08-nar...13:14:24Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && git check-ignore -v rounds/08-nar...Thinking13:14:47
Good, the raw wavs are already covered by the existing ignore rule and contact-narrated is now excluded too. Now I need to add the narration paragraph to CLAUDE.md, placing it right after the assemble.py command block and before the tuner warning note.
I'm drafting a paragraph explaining the narrated cut: how `rounds/08-narration/` holds the script with per-shot lines and pause markers, how narrate.py renders it through Piper into per-take ogg/wav/timing files, and how assemble.py's narrated mode uses that timing to replace captions with the narration's actual sentences timed to speech.
I want to capture the key rules — line-to-segment mapping via `line=` entries, the fit rule for span duration and card stretching, the fixed 0.90 length scale, and the single-timeline loudnorm audio pipeline — before writing the CLAUDE.md edit. First I need to pull the exact wording around the ⚠ tuner note from the printed file.
I found the paragraph — it explains how the tuner shot writes to `look_tuning.lua`, and how `scenes.lua` restores state from the sidecar's raw bytes and rewrites the file, printing what it did, with a note to check `git diff` after captures. I'll insert my addition right after that block, before the "3. **tiles**" heading, matching the existing 3-space indentation and keeping the em dashes since the file already uses them elsewhere.
While it encodes, the CLAUDE.md paragraph.
EditC:\Users\a327e\Desktop\a327ex\emojunky\.claude\CLAUDE.md13:15:00Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\.claude\CLAUDE.mdBashtail -25 "C:/Users/a327e/AppData/Local/Temp/claude/C--Users-a327e-Desktop-a327ex...13:15:00Output not recorded
tail -25 "C:/Users/a327e/AppData/Local/Temp/claude/C--Users-a327e-Desktop-a327ex...Thinking13:15:22
While that's still running, I'll wait for it to finish and use the time to plan verification: checking the narrated mp4 with ffprobe, comparing it against the baseline copy, checking git status, and running sync checks by extracting frames at line boundaries for the plain, ik, grips, and spring-so versions.
I'm working out the exact probe times for each segment—plain, ik, grips, spring-soft, style-fall, tuner—computing when each caption starts and pinning frame extraction points just after and before each line's span so I can confirm captions match spoken audio and the correct shot is showing. I also want to check an audio boundary near the ledge-to-wall transition to confirm speech begins right after the cut.
I'm planning to use silence detection around each line's start to verify speech timing lines up with caption timing rather than eyeballing it. I'm also second-guessing whether applying loudnorm in dynamic single-pass mode across the whole track could amplify noise during the silent gaps between lines.
Actually, since the silence is true digital zero, any gain applied still multiplies out to zero, so that shouldn't be an issue -- and EBU R128 loudness measurement gates out silence anyway, so the integrated loudness target will be based on the actual speech, not dragged down by the gaps. That resolves my concern; I'll let the encode finish.
Monitor{"target": "b83g918aa"}13:15:22Output not recorded
{"target": "b83g918aa"}Bashtail -30 "C:/Users/a327e/AppData/Local/Temp/claude/C--Users-a327e-Desktop-a327ex...13:15:22Output not recorded
tail -30 "C:/Users/a327e/AppData/Local/Temp/claude/C--Users-a327e-Desktop-a327ex...Thinking13:15:28
Got the output down to 8.40 MB in 222.3 seconds using crf 12 in a single pass. Now I need to verify the result — checking with ffprobe, comparing against the silent file, reviewing git status, and confirming frame and audio boundary alignment.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && echo "=== ffprobe narrated ===" &...13:15:32Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && echo "=== ffprobe narrated ===" &...Thinking13:15:53
I notice the audio sample rate jumped to 96000 instead of the expected 22050, which seems odd for the AAC encoder. I'm suspecting this is caused by the loudnorm filter, which internally processes audio at a higher sample rate before output.
So the fix should be adding an aresample step after loudnorm to force the output back to a sensible rate like 22050, since upsampling wastes bitrate and could cause playback compatibility issues. I'm weighing whether to keep it truthful at 22050 or bump to a more standard rate like 44100/48000 for broader compatibility.
I'll honor the brief's spec of 128 kb/s AAC, even though that's well beyond transparent for 22050 Hz mono speech—Discord and browsers handle this format fine. I'll keep it simple and resample back to the original 22050 Hz rate rather than introducing complications with different rates, since plain AAC-LC decoders handle that cleanly without SBR quirks.
The slight duration mismatch (222.40s audio vs 222.32s video) is just AAC frame priming/padding, which is normal and fine to leave as-is.
I should also verify loudness matches target after re-encoding by measuring with ebur128, then proceed with the fix and re-encode.
The audio came out at 96 kHz — loudnorm resamples to 192 kHz internally and the encoder fell back. Fixing that.
EditC:\Users\a327e\Desktop\a327ex\emojunky\tools\explainer\assemble.py13:15:56Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\explainer\assemble.pyBashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "^ARATE\|^LOUDNORM\|^# Sp...13:15:56Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "^ARATE\|^LOUDNORM\|^# Sp...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/explainer/assemble.p...13:15:56Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/explainer/assemble.p...Thinking13:16:23
While that runs, I want to compute the exact expected captions at the probe times from the unit timeline so I can verify against the extracted frames. For the plain line starting at 11.63 spanning 11.48 to 19.62, I'll probe at 11.70 expecting "This is the character." and at 19.50 expecting the next caption text.
Actually, reconsidering the brief, I should probe at the line's start and end instead, so for plain that's 11.70 and 19.20, checking against the two caption chunks. Then I work through the same start/end probing for the remaining lines — ik at 56.05/63.5, grips at 76.1/82.5, and spring-soft at 100.25/105.2 — matching each probe time to its expected caption text and confirming the alignment.
Now I continue this pattern for style-fall (168.15/171.2) and tuner (202.85), checking that each probe lands on the correct caption segment and chip label.
I should also probe the answer card override at 21.8 and the close card foot line near 218, then verify the spring-off to spring-soft audio boundary at 99.98 using silencedetect on a 99.5-102.5 clip, watching for the speech tail from spring-off's line ending at 99.63 that could bleed into the silence window.
Actually a cleaner boundary check would use a spot where the preceding line ends well before the cut, like the tuner/build-montage transition around 202.55, since build-montage's speech ends earlier at 200.9, giving a cleaner silence gap to confirm against.
I'll wait for the current encode to finish, then set up the contact-narrated directory and prepare the frame extraction commands.
Bashsleep 1; echo waiting13:16:25Output not recorded
sleep 1; echo waitingBashtail -6 "C:/Users/a327e/AppData/Local/Temp/claude/C--Users-a327e-Desktop-a327ex/...13:16:25Output not recorded
tail -6 "C:/Users/a327e/AppData/Local/Temp/claude/C--Users-a327e-Desktop-a327ex/...Thinking13:16:35
The file's still encoding, so I can't verify the wall shot caption or answer card yet. I'll hold off polling and instead double-check the narrated section of assemble.py once more while I wait.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '495,520p' tools/explainer...13:16:37Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '495,520p' tools/explainer...Thinking13:16:42
Both parse fine, so now I'm waiting on the encode step to finish. I'm thinking through how to poll for completion without using a blocking foreground sleep, since that's restricted—maybe a bash loop checking the output file for a "done:" marker with a timeout instead.
Right, foreground sleep is blocked; I should use Monitor with an until-loop to wait on the condition instead. Let me load Monitor.
ToolSearch (select:Monitor)
Bashuntil grep -q "done:" "C:/Users/a327e/AppData/Local/Temp/claude/C--Users-a327e-D...13:16:42Output not recorded
until grep -q "done:" "C:/Users/a327e/AppData/Local/Temp/claude/C--Users-a327e-D...Thinking13:16:51
This second wait is redundant since the original background task already notifies on completion, but that's fine either way. I'll just pause and wait for whichever notification comes first.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && mkdir -p rounds/07-explainer/cont...13:16:52Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && mkdir -p rounds/07-explainer/cont...Bashtail -3 "C:/Users/a327e/AppData/Local/Temp/claude/C--Users-a327e-Desktop-a327ex/...13:16:52Output not recorded
tail -3 "C:/Users/a327e/AppData/Local/Temp/claude/C--Users-a327e-Desktop-a327ex/...I'll wait for the encode to finish.
Monitor{"description": "narrated encode finishing", "timeout_ms": 900000, "command": "until grep -q \"done:\" \"C:/Users/a32...13:16:59Output not recorded
{"description": "narrated encode finishing", "timeout_ms": 900000, "command": "until grep -q \"done:\" \"C:/Users/a32...Thinking13:17:04
While the encode runs, I'm preparing the follow-up steps: probing the output, extracting 12 frames plus 2 card frames into contact-narrated/, reviewing them, and checking audio boundaries. I'm jotting down expected probe timings for the plain, ik, and gr variants to compare once ready.
Bashtail -3 "C:/Users/a327e/AppData/Local/Temp/claude/C--Users-a327e-Desktop-a327ex/...13:17:05Output not recorded
tail -3 "C:/Users/a327e/AppData/Local/Temp/claude/C--Users-a327e-Desktop-a327ex/...I'll hold until the monitor reports the encode is done.
Bashls -la "C:/Users/a327e/Desktop/a327ex/emojunky/rounds/07-explainer/explainer-nar...13:17:08Output not recorded
ls -la "C:/Users/a327e/Desktop/a327ex/emojunky/rounds/07-explainer/explainer-nar...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && tail -4 "C:/Users/a327e/AppData/L...13:17:08Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && tail -4 "C:/Users/a327e/AppData/L...Thinking13:17:20
Checking the output stats: audio came out at 22050 Hz mono, 65 kb/s despite requesting 128k — the encoder's actual behavior at that sample rate, which is still plenty transparent. Video is 1280x720 at 60fps, 222.4s, 7.54MB, well under the 25MB limit.
Now I need to verify by extracting the probe frames, using accurate seek so the timestamps line up correctly.
Audio is now 22050 Hz mono. Extracting verification frames.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && V=rounds/07-explainer/explainer-n...13:17:26Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && V=rounds/07-explainer/explainer-n...
Read (C:\Users\a327e\Desktop\a327ex\emojunky\rounds\07-explainer\contact-narrated\plain-start.png)
Thinking13:17:31
The caption "This is the character." on the plain shot looks correct. I'll continue reading through the rest in batches.
Read (C:\Users\a327e\Desktop\a327ex\emojunky\rounds\07-explainer\contact-narrated\plain-end.png)
Read (C:\Users\a327e\Desktop\a327ex\emojunky\rounds\07-explainer\contact-narrated\ik-start.png)
Thinking13:17:36
The IK shot with the frozen body and moved hand target looks good, and the caption checks out. Moving on to the next batch.
Read (C:\Users\a327e\Desktop\a327ex\emojunky\rounds\07-explainer\contact-narrated\ik-end.png)
Read (C:\Users\a327e\Desktop\a327ex\emojunky\rounds\07-explainer\contact-narrated\grips-start.png)
Thinking13:17:42
The rope shot with pink grip marks looks good, and the two-line caption wraps correctly now that the band name grew. Moving to the next item.
Read (C:\Users\a327e\Desktop\a327ex\emojunky\rounds\07-explainer\contact-narrated\grips-end.png)
Read (C:\Users\a327e\Desktop\a327ex\emojunky\rounds\07-explainer\contact-narrated\spring-soft-start.png)
Thinking13:17:48
The "head spring 2 Hz" chip with its caption looks right, showing the x-ray rings/dots for spring targets. Next up is the spring-soft-end case within the hold.
Read (C:\Users\a327e\Desktop\a327ex\emojunky\rounds\07-explainer\contact-narrated\spring-soft-end.png)
Read (C:\Users\a327e\Desktop\a327ex\emojunky\rounds\07-explainer\contact-narrated\style-fall-start.png)
Read (C:\Users\a327e\Desktop\a327ex\emojunky\rounds\07-explainer\contact-narrated\style-fall-end.png)
Read (C:\Users\a327e\Desktop\a327ex\emojunky\rounds\07-explainer\contact-narrated\tuner-start.png)
Thinking13:17:59
The 650px narrow band keeps the tuner panel whole, and the caption looks correct. Moving on to check the tuner-end.
Read (C:\Users\a327e\Desktop\a327ex\emojunky\rounds\07-explainer\contact-narrated\tuner-end.png)
Thinking13:18:02
Good, the arm_swing slider example works with its caption about sidecar file persistence surviving restarts. Now I need to check the remaining cases: card-answer, split-wall, and card-close.
Read (C:\Users\a327e\Desktop\a327ex\emojunky\rounds\07-explainer\contact-narrated\card-answer.png)
Read (C:\Users\a327e\Desktop\a327ex\emojunky\rounds\07-explainer\contact-narrated\split-wall.png)
Thinking13:18:08
The wall shot lines up with "On a wall, the wall face" — that split annotation works, with the cut happening right at the start of that sentence. Now moving to the card-close.
Read (C:\Users\a327e\Desktop\a327ex\emojunky\rounds\07-explainer\contact-narrated\card-close.png)
Thinking13:18:12
The closing card is confirmed good. Now for the audio check, I'll extract the segment around 201.55-204.55s near the tuner boundary and run silencedetect, plus measure overall loudness with ebur128.
Now the audio check at a shot boundary.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && echo "=== window 201.55 -> 204.55...13:18:17Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && echo "=== window 201.55 -> 204.55...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && ffmpeg -v info -ss 201.55 -t 3 -i...13:18:17Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && ffmpeg -v info -ss 201.55 -t 3 -i...Thinking13:18:27
Speech starts at 202.705s, just 0.155s after the shot boundary at 202.55s—right in line with the planned lead-in, with nothing occurring before the cut. Now I want to check overall loudness with ebur128 to confirm the loudnorm pass landed close to target.
I'll skip the full contact sheet extras since they're unnecessary, but I should pull the final durations for the edited take2 lines so the report reflects accurate per-line numbers, then finish with a git status check and another cmp comparison.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && echo "=== integrated loudness of ...13:18:28Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && echo "=== integrated loudness of ...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && ffmpeg -v info -i rounds/07-expla...13:18:28Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && ffmpeg -v info -i rounds/07-expla...Thinking13:18:37
Levels check out at -16.3 LUFS integrated and -1.4 dBFS true peak, right on target. Now I'm running final checks — comparing the silent file again, checking git status, and pulling final line durations for the report, including take2 durations for the edited lines' before/after comparison. I'll confirm the silent assemble script would still work without actually running it, since that would overwrite explainer.mp4 and break the byte-identical requirement.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && echo "=== silent path still build...13:18:44Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && echo "=== silent path still build...Thinking13:18:51
Everything checks out, plan unchanged with 85 segments and 12092 frames, answer card still "Close, but no." Now I'm gathering the before/after durations for the six edited lines to fill in the report's edit table, starting with the ledge line's original duration of 7.56 at 0.90 speed.
Continuing to pull the remaining durations: spring-soft 6.19, spring-stiff 5.78, juice-run-full 5.60, style-run 5.03, and style-slide 4.21 before editing, versus ledge 6.81, spring-soft 5.17, spring-stiff 5.16, juice-run-full 5.30, style-run 4.59, and style-slide 3.83 after. I want to double-check these against durations.txt, then finalize the hold table comparison showing what the edits removed for the report.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -E "^(ledge|spring-soft|spri...13:18:52Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -E "^(ledge|spring-soft|spri...Thinking13:18:59
I've confirmed 36 oggs match the 35 lines plus the full narration file, with all 35 raw wavs accounted for. Most of take2's 11 MB comes from the gitignored raw wavs, so I want to check the size of just the committed ogg files, then pull the final hold table text from the encode output to include in the report.
The brief also wants the ffprobe lines, which I have. I noticed take1 is stale relative to script.txt — no timing.txt or raw folder — but regenerating it is out of scope since it's the owner's earlier take, so I'll just flag it under Noticed. Now let me get the committed-size number.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && echo "take2 oggs: $(du -ch rounds...13:19:00Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && echo "take2 oggs: $(du -ch rounds...Thinking13:19:28
Everything is done now. Since the packet doesn't specify an explicit report path, I'll just return the report as my final message rather than writing it to a file.
I'm compiling the report following the required format: files changed, the chosen length scale, every pause and word edit made per segment, the hold table with visual/line/hold seconds, the new duration and size from ffprobe, the sync check results, anything stopped or partial, and things I noticed. I'm working through the specific edits made to each segment — trimming pauses and tightening wording on ledge, spring-soft, spring-stiff, and others — along with their before/after durations.
I'm also thinking about where to note the judgment calls I made on open-ended parts of the brief, deciding to fold them briefly into the narrative near the files-changed section while keeping the seven required headings intact.
I want to make sure I mention the 96 kHz AAC pitfall and its fix, the real audio bitrate being 65 kb/s rather than 128, and the discovery that take1 was stale. Then I'm double-checking sync timing on the plain clip — confirming the two caption lines land correctly over the running character shot with only a brief 0.13 s hold between them.
Moving to the ik clip, I'm verifying the two captions about the frozen body and the elbow falling out of segment lengths line up over the x-ray with red crosses and the raised hand target, with a 0.20 s hold. For the grips clip I'm checking the rope-climbing captions match the pink grip marks on the column, and now I'm starting to verify the spring-soft segment's caption about the soft head spring against its chip label and spring target visuals.
Now I'm noting the 105.20 frame falls within the 1.50 s freeze despite the take running out of frames at 104.15, so it uses the take's last pose. Then I move through style-fall, checking the caption stays fixed across three clips while only the chip label changes as intended, and finally I check the tuner segment — the narrow panel band and live-slider caption, then the sidecar-file caption paired with the arm_swing slider being dragged.
Checking a few more evidence points: Q&A at 21.80 shows the narrated override, split-wall at 74.50 confirms the ledge-to-wall cut lands on the right line, and card-close at 218.00 still shows the foot line. I run silencedetect on the transition window and confirm speech starts 0.155 s after the montage-to-tuner cut, with clean loudness stats (-16.3 LUFS, -1.4 dBFS true peak, 4.8 LRA) and nothing preceding it. With the frame paths confirmed as gitignored evidence, I'm ready to write the final message.
Everything verifies. Here is the report.
1. Files changed / created
| path | what |
|---|---|
C:\Users\a327e\Desktop\a327ex\emojunky\tools\explainer\narrate.py | argparse (positional take, --out, --length-scale → Piper's --length_scale); writes <take>/raw/<id>.wav (un-normalised, what the mix uses) and <take>/timing.txt (a line row per line, a chunk row per spoken chunk with its offset). Unchanged: the oggs, narration-full.ogg, durations.txt, the default take1 |
C:\Users\a327e\Desktop\a327ex\emojunky\tools\explainer\assemble.py | --narrated [--take take2]: read_timing, sentences, narr_blocks, narr_spans, narrated_units, narration_track; encode() takes an audio path and memoises a repeated frame; main() resolves the output and prints a hold table. SCRIPT gained line= on every segment, split= on wall / bounce-high / juice-land-full, narrated={...} on the "Close, but no" card |
C:\Users\a327e\Desktop\a327ex\emojunky\rounds\08-narration\script.txt | six lines edited (§2) |
C:\Users\a327e\Desktop\a327ex\emojunky\rounds\08-narration\take2\ | new: 35 oggs + narration-full.ogg (2.7 MB, tracked), 35 raw wavs (7.9 MB, already gitignored by rounds/*/*/raw/), durations.txt, timing.txt |
C:\Users\a327e\Desktop\a327ex\emojunky\rounds\07-explainer\explainer-narrated.mp4 | new, 7.54 MB |
C:\Users\a327e\Desktop\a327ex\emojunky\rounds\07-explainer\contact-narrated\ | new, gitignored: the 15 verification frames |
C:\Users\a327e\Desktop\a327ex\emojunky\.gitignore | + rounds/07-explainer/contact-narrated/ |
C:\Users\a327e\Desktop\a327ex\emojunky\.claude\CLAUDE.md | "The narrated cut" paragraph in the explainer section |
explainer.mp4 is byte-identical (cmp clean, md5 81affff008548ef66ef9b8324628e726 before and after), and the silent build's plan is unchanged too: 85 segments / 12092 frames / 201.5 s, answer card still "Close, but no."
Decisions the brief left to me
- Card text is overridden, not replaced. The
answercard carriesnarrated={...}; SCRIPT still holds the silent card's words, so a futureassemble.pywith no flag rebuilds the same silent video. - A two-take span cuts on a named sentence. "Takes hold their last frame for the shortfall" is unambiguous for one take; for
ledge+wall, the two bounces and the two landings, holding only the last take would have put "On a wall, the wall face" and "High, it rings" over frames that had already run out.split=Nnames the caption sentence the cut happens at, and the earlier take waits (never trims) to reach it. Result: all three cuts land on their sentence —bounce-highandwallstart exactly with the words,juice-land-full0.42 s after "and on:" begins. - The first sentence covers the 0.15 s lead-in (no blank band for 9 frames), and the last caption stays to the end of its span when the visual outlasts the line (juice-breath, juice-rope, style-crouch), rather than the band blinking off.
- Audio 22050 Hz all the way through.
loudnormruns at 192 kHz internally and hands that rate on: the first encode wrote a 96 kHz AAC track of a 22 kHz voice.LOUDNORMnow ends,aresample=22050. At that rate the encoder does not spend the-b:a 128kbudget — it settles at 65 kb/s, which is well past transparent for this source. loudnorm=I=-16:TP=-1.5:LRA=11on the assembled track rather than ffmpeg's-24default, which is broadcast-quiet for a video. Measured result below.- Kept
plain's silent cut (480 of its 600 captured frames). It fits at this scale with 0.13 s to spare, so extending it was never needed.
2. Length scale, and every edit
0.90. It is what turns the problem from structural into local: at 1.00 twenty-plus lines overrun their shots (points alone by 4.8 s); at 0.90 six do. Going further buys almost nothing — the {n} pauses and Piper's 0.25 s per-sentence silence do not scale, so only the speech does, and for these lines 0.88 saves 0.09–0.13 s each. That changes no hold verdict, so it is 2% more pace for nothing. One value for the whole video, as required.
⚠ take1 was rendered from an older script.txt (its limbs is 11.69 s against 6.12 s now, its close 13.40 against 7.18) — the owner shortened those lines after it. Its durations are not comparable to anything; I noted that in CLAUDE.md. "before" below means take2 at 0.90 with his current text, measured, not take1.
| line | change | old | new | s |
|---|---|---|---|---|
ledge | pauses only, {0.4}{0.4} → {0.15}{0.15} | — | — | 7.56 → 6.81 |
spring-soft | pauses {0.3}{0.4}{0.3} → {0.15}×3, and words | Same jump, one number: a soft head spring. | One number: a soft head spring. | 6.19 → 5.17 |
spring-stiff | pauses {0.3}{0.4} → {0.15}×2, and words | The top-leads-the-way feel is just two spring speeds. | The top-leads-the-way feel is two spring speeds. | 5.78 → 5.16 |
juice-run-full | pauses {0.3}{0.2}{0.2} → {0.15}×3, and words | lean from speed, the arms dragging, a stretch along the motion. | lean from speed, arms dragging, a stretch along the motion. | 5.60 → 5.30 |
style-run | pauses only, {0.4}{0.3} → {0.15}{0.15} | — | — | 5.03 → 4.59 |
style-slide | pauses only, {0.4}{0.3} → {0.15}{0.15} | — | — | 4.21 → 3.82 |
On spring-soft I cut "Same jump," rather than "one number:" because one number changed is the thesis of that whole section, and his own next line already opens "A stiff one:" with no "same jump" — the shot before it is the same jump on screen. On style-slide I used (a) and (b) and stopped: (c) could only have deleted "the rest is style" or "hand and foot on the wall", each of which is one of the two facts the shot exists to show. Its 2.00 s hold is structural, not a text problem — see §7.
3. Holds
Every freeze the run produced, in order. The line seconds are the narration; the hold is what the take's last frame is held for.
| segment | visual s | line s | hold s |
|---|---|---|---|
plain | 8.00 | 7.63 | 0.13 |
points | 10.00 | 10.69 | 1.18 |
ik | 8.00 | 7.70 | 0.20 |
ledge (waits for the wall cut) | 4.33 | 6.81 | 0.83 |
grips | 7.00 | 6.63 | 0.13 |
feet | 6.00 | 5.88 | 0.38 |
spring-off | 4.17 | 4.53 | 0.87 |
spring-soft | 4.17 | 5.17 | 1.50 |
spring-stiff | 4.17 | 5.16 | 1.50 |
bounce-low (waits for the bounce-high cut) | 2.33 | 4.99 | 1.45 |
juice-run-full | 4.17 | 5.30 | 1.63 |
juice-land-full | 2.50 | 5.72 | 1.22 |
style-walk-teeter | 1.25 | 5.54 | 1.03 |
style-run-piston | 1.25 | 4.59 | 1.33 |
style-jump-star | 1.53 | 4.31 | 0.22 |
style-slide-eagle | 1.17 | 3.83 | 2.00 |
wall, bounce-high and juice-land-off take no hold at all — their spans absorb it elsewhere. Nothing else in the video freezes: every card just lasts longer, and no take's frames were sped up, dropped or looped.
4. Output
222.3 s (3:42), up from 201.5 s (3:21). 7.54 MB, first pass at crf 12, well under 25 MB.
index=0 codec_name=h264 codec_type=video width=1280 height=720
r_frame_rate=60/1 bit_rate=197553 nb_frames=13339
index=1 codec_name=aac codec_type=audio sample_rate=22050 channels=1
bit_rate=65276 nb_frames=4789
duration=222.400000 size=7537128 bit_rate=271119Loudness of the finished track: I = -16.3 LUFS, true peak -1.4 dBFS, LRA 4.8 LU.
cmp <baseline copy> rounds/07-explainer/explainer.mp4 -> IDENTICAL
git status --short
M .claude/CLAUDE.md
M .gitignore
M tools/explainer/assemble.py
?? rounds/07-explainer/explainer-narrated.mp4
?? rounds/08-narration/
?? tools/explainer/narrate.pylook_tuning.lua has no diff (no capture ran).
5. Sync checks
Frames pulled out of the finished mp4 and read; all fifteen are in C:\Users\a327e\Desktop\a327ex\emojunky\rounds\07-explainer\contact-narrated\.
- plain 11.70 s — "This is the character." under the running character, no x-ray. 19.20 s — "Everything is drawn from scratch, every frame.", still the plain take. Both are the sentence
timing.txthas being spoken then. - ik 56.05 s — "Here the body is frozen, and one target moves by hand." over the frozen x-ray skeleton with its four red target crosses. 63.50 s — "The elbow falls out of the segment lengths, and where the hand is.", the hand target now lifted clear of the body and the arm locked toward it.
- grips 76.10 s — "On a rope, each hand keeps its grip while the body climbs, then grabs again higher.", wrapped to two lines and the band grown to hold them; pink grip marks on the column. 82.50 s — "The pink marks are the grips." with two pink grips visible.
- spring-soft 100.25 s — chip "head spring 2 Hz", caption "One number: a soft head spring." (the edited text), the ring-vs-dot spring targets on hip and head. 105.20 s — "The head trails, then overshoots."; this frame is inside the 1.50 s freeze (the take's frames end at 104.15) and is that take's last frame, as reported.
- style-fall 168.15 s — chip "fall · spread · core", caption "Fall.". 171.20 s — chip "fall · helicopter · o", caption "This one drifts against the forward speed.". The caption holds across the group's three clips while the chip changes per clip, which is what the montage should do.
- tuner 202.85 s — the narrow 650 px band, "And every number is a slider, live.", the tuner panel whole and unclipped. 213.10 s — "Changes go to a sidecar file, so tuning survives a restart." with
arm_swingmid-drag.
Three extra frames, since they were the parts most likely to be wrong: the answer card (21.80 s) reads "No rigid bodies, no constraint solver, / no skeleton, no keyframes." big with nothing under it; the ledge→wall cut (74.50 s) lands on "On a wall, the wall face." over the wall-slide x-ray; the closing card (218.00 s) keeps its four lines and the "controller.lua has not changed…" foot.
Audio at a boundary. The build montage → tuner cut is at 202.55 s and the line is placed at 202.70. silencedetect -45dB over [201.55, 204.55]: silence from the window start to 1.155 s, i.e. speech begins at 202.705 s — 0.155 s after the cut, the lead-in exactly, and nothing before it.
6. Stopped / partial
Nothing stopped, nothing partial. No capture ran, the game was never launched, nothing was committed.
7. Noticed
style-slidehas half the footage of its neighbours. Every other styles group is 3–4 clips; slide is two, 1.17 s each, 2.33 s total against a 3.83 s line. It is the only 2 s freeze in the video and no text edit reaches it — a third slide style, or a longer capture of those two, is the actual fix, and it needs a re-capture, which is outside this.style-walk-teeterandstyle-run-pistonare milder cases of the same thing (1.25 s clips).take1is stale. It predates the owner's last pass overscript.txt, so it and take2 cannot be compared line by line. Worth either re-rendering or deleting; I left it alone.- The build montage says "twelve bodies" over six. Both the silent caption and the narration claim twelve; the manifest holds
build-a,a4,a4b2,a4d,x1,x3. The silent video already shipped with this, so it is not something the narration introduced, but the voice saying the number makes it louder than a caption did. - The
targetscard slightly pre-empts its own next line. Its small text ends "The interesting ones come from the world." and theledgeline then opens with that same sentence. Not a contradiction, so per the brief I left the card alone — but the card could lose that second line and nothing would be missing. juice-landis the one caption that leads its cut (0.42 s: "and on:" starts while the OFF landing is still up). Fixing it would mean trimming frames offjuice-land-off, which the brief forbids, and it reads as the words cueing the cut rather than as a mistake.- The narration take now carries 7.9 MB of raw wavs. They land under
rounds/08-narration/take2/raw/, which the existingrounds/*/*/raw/rule already ignores — convenient, but it means a fresh clone must re-runnarrate.pybefore--narratedwill build.