emojunky: character round 3 evidence (three builds in motion)
Transcript
packet: brief.md22:59:49
# emojunky — character round 3 evidence: the three builds in motion, side by side
You are implementing under an agreed brief written by Fable (Claude), who is
directing this work for the owner. The brief closes the high-level decisions;
the details are yours to decide, and you list the ones you made in the report.
Where the brief is silent on something that would change the approach, where it
turns out to be wrong, or where a step would reach outside the scope below --
other people's servers, rate limits, large downloads, disk, network, money,
anything the brief did not put in your hands -- stop and report instead of
choosing. Read `C:/Users/a327e/Desktop/a327ex/emojunky/.claude/CLAUDE.md` for
project facts (paths, docs, commands, gotchas); its process rules about briefs
and asking the owner bind Fable, not you. Do not commit, push, run the game
interactively (never `run.bat`), or touch files outside the scope. End with the
report in the format given.
## Task
The owner wants to see the character's three body builds (`T.look.preset`
`a`/`b`/`c`) IN MOTION, side by side, doing the same actions. Build a capture
tool that drives the real controller through a fixed set of short action
sequences, records every other frame around the character, and a Python step
that turns each sequence into a looping animated GIF at 4x nearest-neighbour,
then a page `rounds/03-motion/index.html` with one row per action and one
column per build, the three GIFs of a row having the same frame count so they
loop in step. No change to how the character looks or moves: this is
evidence only.
Read first: the project CLAUDE.md; `tools/pose_sheet.lua` (how the sheet tool
reaches poses through the real controller — reuse its reach functions and its
crop/label conventions from `tools/pose_sheet.py`); `tools/verify.lua` for the
input-scripting vocabulary (`agent_tap`, injected keys, `engine_step`).
## Approach
`tools/motion_sheet.lua` (eval channel, like the sheet tool; honours a
`MOTION_SHEET_DIR` global, default `rounds/03-motion`, and creates its folders
the way `pose_sheet.lua` now does with `os.execute('mkdir ...')`). For each
preset and each ACTION below: load the calibration room (or the walls room
where noted), put the character where the action starts (reuse the sheet
tool's reach functions where they fit), then run the action's input script
while snapshotting every 2nd rendered frame for the action's duration (60 Hz
render, so 30 captures per second; durations 1.5-3 s), naming frames
`raw/<preset>-<action>-<nnn>.png`, and writing a manifest line per frame with
the character's feet position in SCREEN pixels at that frame (so the Python
step can crop a window that follows the character, the way the sheet crops
around the feet). Reset between actions so each starts identically for all
three presets: the SAME script, the SAME frame count per action across
presets (fixed duration, not "until the state ends").
Actions (the script is yours to write; what each must show):
1. `walk` — walk right across flat floor for ~2 s (A/D held).
2. `run` — the same with SHIFT.
3. `jump` — stand, hold jump for a full-height jump, land, ~1.5 s.
4. `fall_land` — drop from a pit edge of 6-8 tiles (calibration's pit row),
land, ~2 s, so the landing squash shows.
5. `hang_climb` — jump at a grab wall, hang, then climb up (W), ~2.5 s.
6. `slide_walljump` — in the walls room: slide down a face, wall jump, ~2 s.
7. `rope` — throw a rope up (E) and climb it (W held), ~2.5 s.
8. `crouch_walk` — hold S and walk, ~1.5 s.
If an action cannot be scripted reliably with the existing reach functions,
drop it from the page and report it; do not spend the round on one action.
`tools/motion_sheet.py [round_dir]`: reads the manifest, crops each frame to a
fixed window around the character's feet (the same window size for every
frame of a row so the GIF does not jitter; wide enough for the rope and the
wall: about 64x48 source px, your call), scales 4x nearest, writes one GIF per
`<preset>-<action>` at 30 fps looping forever (Pillow `save(..., save_all=True,
duration=33, loop=0)`), and `index.html`: a table, rows = actions (labelled),
columns = a / b / c (labelled), each cell its GIF, plain HTML, relative paths,
no external resources, plus one line per row saying the frame count. The
sheet page's look is fine to copy.
## Interfaces
- New files only: `tools/motion_sheet.lua`, `tools/motion_sheet.py`,
`rounds/03-motion/` (raw frames, `gifs/`, `manifest.txt`, `index.html`).
- Read-only: everything else. If `pose_sheet.lua`'s reach functions are
`local`, copy what you need into the new tool rather than editing it.
- The character's screen position: the camera is `cam` (see `controller.lua`
`camera_lab_update` and `view.lua` `world_attach`); the feet are at
`(p.x*TILE_PX, (p.y + player_hh(p))*TILE_PX)` in world px; convert with the
camera the way the sheet tool does.
## Decisions closed
The action list, every-2nd-frame capture, 4x nearest GIFs, one page with a
rows-by-columns table, fixed window per row, default preset restored at the
end. Yours: scripts, window size, durations within the stated ranges, GIF
palette handling.
## Scope / stop conditions
May create the three new paths above only. Stop if: Pillow cannot write GIFs;
snapshots come back without the character; the eval channel cannot inject the
inputs an action needs. Never run `run.bat`.
## Verification
anchor check . # 0 errors
anchor drive start .
anchor drive eval . --file tools/motion_sheet.lua # frames + manifest, no Lua errors in the log
anchor drive stop .
python tools/motion_sheet.py rounds/03-motion # gifs + index.html
anchor drive start . && anchor drive eval . --file tools/verify.lua && anchor drive stop . # still 216/216 (nothing should have changed)
Open two or three GIFs' frames yourself (Read a few raw frames and one
composed GIF's first frame): the character is in the window, doing the named
action, the window does not jump. Report the frame count per action.
## Report format
1. Files created, one line each. 2. The action scripts in one line each and
the durations/frame counts. 3. Decisions (window size, anything dropped and
why). 4. Verification (verify count, which GIFs you looked at). 5. Anything
noticed. Nothing else.I'll start by reading the brief in full.
ReadC:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\emojunky-motion-sheet.md22:59:53Output not recorded
C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\emojunky-motion-sheet.mdThinking22:59:56
I should check the project's CLAUDE.md and referenced tools, using Bash with cat since bypass permissions mode requires that approach for file reads.
Bashcat "C:/Users/a327e/Desktop/a327ex/emojunky/.claude/CLAUDE.md"22:59:56Output not recorded
cat "C:/Users/a327e/Desktop/a327ex/emojunky/.claude/CLAUDE.md"Bashls -la "C:/Users/a327e/Desktop/a327ex/emojunky/" && echo "--- tools ---" && ls -...22:59:56Output not recorded
ls -la "C:/Users/a327e/Desktop/a327ex/emojunky/" && echo "--- tools ---" && ls -...Thinking23:00:00
I'll take a look at the pose_sheet.lua and pose_sheet.py tool files to understand how they work.
Bashcat "C:/Users/a327e/Desktop/a327ex/emojunky/tools/pose_sheet.lua"23:00:00Output not recorded
cat "C:/Users/a327e/Desktop/a327ex/emojunky/tools/pose_sheet.lua"Bashcat "C:/Users/a327e/Desktop/a327ex/emojunky/tools/pose_sheet.py"23:00:00Output not recorded
cat "C:/Users/a327e/Desktop/a327ex/emojunky/tools/pose_sheet.py"Thinking23:00:07
I want to check verify.lua for the scripting vocabulary around walking, running, wall slides, and ropes, but it's 57KB so I'll grep for relevant sections instead of reading it fully. I also want to check rounds/02-flat to see how round 2 handled a similar page, and look at the key globals like CALIBRATION_GROUND, CALIBRATION_PITS, and CALIBRATION_STEP2_X.
Now I'm grepping rooms.lua for the calibration and walls room definitions.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "CALIBRATION_\|WALLS_\|^l...23:00:08Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "CALIBRATION_\|WALLS_\|^l...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && ls -la rounds/01-poses rounds/02-...23:00:08Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && ls -la rounds/01-poses rounds/02-...Thinking23:00:11
I should check the calibration map and walls map to understand the underlying geometry better.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '1,175p' rooms.lua23:00:11Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '1,175p' rooms.luaThinking23:00:14
I should check verify.lua for the slide and wall-jump scripting logic, along with the input vocabulary, so I'll grep for the relevant helper functions there.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '1,140p' tools/verify.lua23:00:15Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '1,140p' tools/verify.luaThinking23:00:17
Let me look for the wall slide and wall jump tests in verify.lua, along with the rope tests.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "^-- ──\|^line('---" tool...23:00:18Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "^-- ──\|^line('---" tool...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '454,600p' tools/verify.lu...23:00:18Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '454,600p' tools/verify.lu...Thinking23:00:25
I need to locate the definitions of wall_pose, WALL30_FLUSH, WALL30_TOP_Y, and WALL30_LANE in verify.lua before proceeding.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "WALL30_FLUSH\s*=\|WALL30...23:00:25Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "WALL30_FLUSH\s*=\|WALL30...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '396,455p' tools/verify.lu...23:00:25Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '396,455p' tools/verify.lu...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '266,360p' tools/verify.lu...23:00:25Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '266,360p' tools/verify.lu...Thinking23:00:35
I need to check some key pieces of the codebase: camera-to-screen conversion, camera snapping, player reset, player dimensions, camera following logic, tile size constants, and engine snapshot/step semantics — confirming that one rendered frame equals two ticks, so engine_step(1) corresponds to a single rendered frame at 60fps.
Now I'll look at the camera functions in controller.lua and view.lua.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "function camera_to_scree...23:00:35Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "function camera_to_scree...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '1040,1130p' controller.lu...23:00:35Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '1040,1130p' controller.lu...Thinking23:00:43
I need to check `camera_to_screen`, likely a framework function used in pose_sheet.lua. I also want to verify whether setting `T.look.preset` triggers a recompute of `D.look` values, or if tuning.lua derives those separately without a resolve step.
Since `D.hh` is the hitbox, it's probably fixed regardless of look preset since look is purely cosmetic, but I should double-check that assumption.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "look" tuning.lua | head ...23:00:43Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "look" tuning.lua | head ...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -rn "function camera_to_scre...23:00:43Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -rn "function camera_to_scre...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '110,200p' tuning.lua && e...23:00:43Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '110,200p' tuning.lua && e...Thinking23:00:51
Since the hitbox is preset-independent, the same input script gives identical motion and feet position across all three presets, meaning the crop window can stay identical across a row too. The look code doesn't affect physics, so now I'm turning to how camera coordinates map to screen position.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '110,150p' anchor/camera.l...23:00:52Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '110,150p' anchor/camera.l...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && cat tools/snapshot.lua | head -8023:00:52Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && cat tools/snapshot.lua | head -80Thinking23:02:14
I'm checking the existing pose sheet output and git status before planning the motion_sheet.lua design. Since rendering runs at 60Hz but ticks at 120Hz, I need to capture every second rendered frame when stepping through frames.
Working through the durations for each action (walk, run, jump, fall_land, hang_climb, slide_walljump, rope, crouch_walk), I'm tallying up roughly 480 captures per preset across three presets, totaling 1440 PNG frames at 640x360. That's a meaningful amount of disk space, so I'm weighing whether this matches what the brief actually asked for -- it does specify this exact frame-stepping approach and duration range, so I'll check the size of existing raw frames to estimate total footprint before proceeding.
I also need to figure out GIF timing (30fps means roughly 33ms per frame duration) and the crop window sizing -- around 64x48 source pixels scaled up 4x to 256x192 output. Since the crop follows the character's feet in screen space, the character stays fixed in the frame while the background shifts, though I need to watch for cases where the camera tweening causes the feet's screen position to jump.
Actually, checking the math: a 2s walk at 5.5 tiles/s covers about 264px, and with tween lag the character's screen position would oscillate but stay roughly within ±20px. The brief calls for a fixed-size window that tracks the feet without jumping, so centering exactly on the feet each frame keeps the character static while the background moves underneath — like a treadmill effect, which reads correctly for a walk cycle.
For a jump though, this same approach fails — if the window follows the feet vertically, the character never appears to rise since the whole frame just tracks with it, hiding the motion. So I need a different anchoring strategy: keep the horizontal window following the feet (treadmill effect for walking) but fix the vertical anchor at the start of the action so jumps and falls actually show visible displacement.
But re-reading the brief, it's explicit: the manifest records feet position per frame precisely so the crop can follow the character the way the sprite sheet does — a fixed window around the feet, full stop. That's the decision already made for me, so I should just follow it rather than inventing a smoothing scheme.
That's actually good evidence — the owner wants to see the character's own motion, not the traversal, so a body-locked window is exactly how you'd compare walk cycles across builds. And since physics are identical across presets, the feet stay in the same screen position for all three, so a shared crop window is automatic. I'll just round the crop origin to integer pixels for cleanliness.
I should double-check the crouch transition: since the box shrinks from the top while the bottom (feet) stays anchored, feet position stays consistent through crouch and other states like hanging, so per-frame feet tracking won't cause any jumps.
Now I'm working out fixed offsets for cropping — placing the feet at a set pixel position within the window, like FEET_X=32, FEET_Y=38 for a 64x48 frame, leaving enough headroom (~38px) above the feet for the body, head, and raised arms during climbing or hanging poses.
For fall_land, the feet-locked window still works since the background streams upward and the squash on landing is what actually reads. For slide_walljump, keeping the feet locked means the wall itself shifts alongside the character, which is fine at 64px wide even as the body launches away from it during the jump.
At 4x upscale, the 64x48 window becomes 256x192 per frame, and with 8 rows by 3 columns that's a manageable page layout. File sizes should land in the tens of KB per GIF, so a couple megabytes total across all 24 isn't a concern. I considered storing frames at native 64x48 and letting CSS handle the pixelated scaling instead of baking the 4x into the GIF itself, but the brief explicitly calls for 4x nearest scaling in the output file, so I'll follow that.
For color handling, quantizing each frame independently would cause palette flicker between frames since the flat game art has limited colors, so I'll build a single master palette from a composite of all frames in a given GIF, then remap every frame against that shared palette to keep colors consistent across the animation.
Since palette mode preserves indices through nearest-neighbor resizing, I can quantize once at native resolution then upscale cheaply. My plan: crop each frame at 64x48, stack them into one tall RGB image, quantize the whole thing to a shared palette, then slice back into frames and resize each 4x with nearest-neighbor before saving as an animated GIF with a fixed frame duration and looping.
I'll leave disposal unspecified since Pillow automatically handles delta-encoding between same-palette P-mode frames, letting each new frame's bounding box overlay correctly on the previous one. I'll verify by reloading the finished GIF and inspecting a handful of frames visually, then move on to defining the manifest format as a tab-separated file listing preset, action, index, filename, and foot coordinates.
Now I'm setting up the Lua tool structure, creating output and raw directories with a Windows-safe mkdir call, relying on the fact that `mkdir`/`md` builds the full directory tree automatically since command extensions are enabled by default, and I'll also need a gifs subdirectory under the output path.
For actions, I'm designing each one with a setup function that resets the room, position, and initial state, plus a tick function called per capture frame to hold the right keys. The capture loop runs setup, then for each frame calls tick, steps the engine two frames, and snapshots, before releasing keys -- though I need to think about timing since key changes need to align correctly within that two-frame step window.
I'm reconsidering: instead of a per-capture tick, I could script key events by absolute rendered-frame count for clarity. For jump actions specifically, holding space for around 30 frames gives a full-height jump before releasing.
I need to check whether player_reset's call to human_look_init actually reads the preset value I set beforehand, so the look initializes correctly for each capture. I should also confirm debug_on stays false during capture like pose_sheet does, and double-check the room-label positioning doesn't intrude on the crop area. Then I want to verify what F2 does for cycling presets, likely in boot.lua or main.lua.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "human_look_init\|look_pr...23:02:15Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "human_look_init\|look_pr...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && ls -la rounds/01-poses/raw | head...23:02:15Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && ls -la rounds/01-poses/raw | head...Thinking23:02:30
Frame storage size seems fine at roughly 16 MB total. I notice the rounds directory isn't gitignored, so committing all those PNGs could bloat the repo — worth flagging in my report even though I'm not committing them myself, since the automatic journal snapshot is outside my control.
I'm working out the frame counts per preset using half-durations at every-other-frame capture: walk gives 60, run 60, jump 45, fall_land 60, hang_climb 75, slide_walljump 60, rope 75, crouch_walk 45, totaling 480 per preset and 1440 overall, which stays around 16 MB — acceptable.
Now I want to check view.lua's human look initialization and drawing logic to confirm that setting the preset alone is enough, since the derived look table gets rebuilt automatically without extra recomputation needed on my part.
Next I should look at the controller's state machine list — stand, walk, run, crouch, jump, fall, hang, climb_up, lower_off, slide, rope, dead — and grep for how rope and climb states are specifically handled.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "p.state = '" controller....23:02:30Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "p.state = '" controller....Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '456,520p' view.lua23:02:30Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '456,520p' view.luaThinking23:03:06
I realize the blink timing uses random values, which would make the three preset GIFs blink out of sync unless I seed it consistently. I'll seed math.randomseed with a fixed value before each action so the three columns stay comparable, checking that nothing else relies on randomness during these static calibration actions.
Now I'm working out the actual action scripts precisely, starting with the walk action in the calibration room. I need to check the walk speed value since walking right for 2 seconds from x=10.5 could run into the step at x=15, so I'm reconsidering whether to walk left instead, or find a longer stretch of flat floor elsewhere to avoid hitting obstacles.
This confirms the wall positions at columns 37 and 41, matching my calibration values. I also notice a solid block spanning columns 46-55 across rows 0-11, forming a tall structure resting on the floor.
Rather than manually counting dots character by character, which is error-prone, I decide it's better to programmatically compute the free spans between the wall blocks and the pits, using the calibrated wall position plus offset up to the first pit around x=82.
Checking the walk speed math: at 3.5 tiles/sec, a 2s walk covers 7 tiles, and even at run speed (5.5 t/s, 11 tiles) starting from x=1.5 stays under the step at col 15. So the leftmost floor span (cols 1-14) works for both walk and run tests, with the player starting near the left wall accounting for half the hitbox width.
I should also confirm room labels won't intrude on this small viewport, so I need to check where they're drawn in view.lua alongside verifying the actual walk/run speed constants.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "walk_speed\|run_speed\|c...23:03:08Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "walk_speed\|run_speed\|c...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "room label\|labels\|ROOM...23:03:08Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "room label\|labels\|ROOM...Thinking23:03:20
With running at 10 tiles/sec, 2 seconds covers 20 tiles, which won't fit on the 14-tile leftmost floor. I need to find a longer clear stretch elsewhere on the map to build up that run speed, so I'm checking the spans between the pits and towers for a suitable flat section.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'EOF' import re src = ...23:03:23Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'EOF' import re src = ...Thinking23:04:26
Checking row 11 near the floor, I see obstacles at cols 15-17, 22-24, 29-31, 37-38, and 41-42, then it's clear from 43 to 150. The tower spanning 47-56 only occupies rows 0-10, so it doesn't block row 11 — but I need to account for the body's height when standing, which reaches down into row 11-12.
This means the tower actually creates a low corridor with a one-tile gap underneath, which matches something mentioned about a "low corridor" — a standing body at 0.8 tiles tall should just fit through it, though the pose sheet's description of the tower's row span seems slightly off from what I'm seeing. I want to find a cleaner clear stretch, so I'm now checking cols 57-81 on row 11 to see if the space above is fully open there too.
I'm confirming the pit layout matches the calibration values — row 12 alternates between 4-wide pits and 3-wide walls starting at col 82, lining up with the expected pit x-positions. Now I need to find a clean, ceiling-free stretch long enough to test the run cycle at 20 tiles over 2 seconds.
The rope ceilings sit 8 and 4 tiles above the floor respectively, which is well outside the 2-tile-tall crop window centered near the feet, so those ceilings won't actually interfere with the run test even though they visually appear over that region.
For consistency I'll do both walk and run tests starting from the same x=57.5 point on the uniform rock floor, so the background context stays identical between clips.
For the jump action, I'll have the character stand on flat ground around x=57.5 and hold space for a full-height jump reaching roughly 1.6 tiles apex, timing the press-and-release so the rise, fall, and landing squash fit within about 1.5 seconds.
Actually a reactive tick that releases space at apex (when vertical velocity crosses zero) is cleaner — since physics are identical across presets, this stays deterministic even though it's state-based. I'll note that design choice in the report, then move to planning "fall_land": walking off a pit lip 6-8 tiles wide (using calibration's pit rows around x=89-103) and letting the character drop and land over about 2 seconds.
Checking the map layout, I confirm the 7-deep pit at x=96 has its floor at row 19, so I'm planning the walk: stand on solid ground left of the pit, walk right off the lip, and fall the seven rows to land on the pit floor.
A 7-tile fall likely triggers fall damage, which brings up the dizzy face override for half a second — I need to check the fall damage tiers to see if 7 tiles crosses the threshold, since I'd rather get a clean big squash without the dizzy expression interfering if possible.
For the hang-climb action, I'm positioning the character to jump at a grab wall, reach hang, then climb up with 'w' to end standing on the step — totaling about 2.5 seconds (150 frames, 75 caps). For the wall-jump slide action, I'm setting up the wall pose with 'a' held to slide, then pressing space around frame 40 to trigger the wall jump while holding direction, calculating the wall's flush x-coordinate for positioning.
The top of that wall face sits at row 6.4, so holding 'a' there slides down. After enough frames, tapping space triggers a wall jump to the right, sending the character arcing into the long lane toward the row-35 floor -- that should capture the slide-and-walljump sequence within 2 seconds. I'm also considering whether there's an opposing wall around col 29 to bounce off for a more dynamic sequence.
I'll script it as: hold 'a' until frame 60, then press space (holding briefly for a proper wall jump), release 'a', and hold 'd' through frame 120 to catch the far wall — since holding 'd' after jumping right moves away from the wall, it should work fine during the forced-move window.
For the next action, the rope climb, I'll use the calibrated ceiling height eight tiles up, position at the anchor point, tap E to throw the rope, then hold W to climb for about 2.5 seconds.
But I need to check timing — if the rope takes up to 120 frames (2s) to fully unroll and set before it can be climbed, that eats into the 2.5s action budget. I need to look at the rope unroll speed to figure out how much time is left for actual climbing after the throw animation completes, and whether the player needs to walk into the rope to grab it once it lands.
For crouch_walk I need to check if there's a crawl speed value in the tuning file to figure out the actual movement rate during a crouched walk.
Now I want to check the fall tiers and rope/crouch tuning values in the code.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '15,110p' tuning.lua23:04:26Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '15,110p' tuning.luaThinking23:05:12
Falls under 8 tiles deal no damage, so a 7-tile pit gives a clean landing, but I want to stay safely within the 6-8 range without pushing right up against the threshold—maybe the 6-deep pit at x=89 is the safer choice.
Actually going with 7-deep at x=96 makes sense: walking off the lip at that speed, the fall time works out to an equivalent height still under 8, so no damage triggers. I should also check the rope-throw mechanics — verifying that a throw at 22 t/s against gravity 34 can actually reach an 8-tile-high anchor point, since the velocity needed exceeds what's available, which could affect where verify.lua expects the rope's top to land.
Given the timing adds up to roughly 1.05s for an 8-tile rope, that's too slow for a 2.5s action window. Switching to a 4-tile rope anchor instead cuts the throw-and-unroll time to about 0.5s, leaving enough time for a short climb sequence that still gets a couple hand-over-hand cycles in.
Actually, with ROPE4_X at 2.5s the player would top out the rope with an awkward static hang, so that's not ideal. Switching to ROPE8_X = 63: tap E at frame 6, hold W from frame 20, rope sets around frame 69, giving climb time from ~70 to 150 — about 4 tiles up, which nicely shows the throw, unroll, and catch in sequence.
I could also just place the rope programmatically like the pose_sheet's reach_rope helper does and skip straight to showing the climb, but the brief specifically calls for a thrown rope (E) followed by climbing (W held). Another option is throwing, catching, climbing up most of the ceiling height, then holding S partway to climb back down for variety.
Simplifying further, I'll settle on ROPE8_X at 2.5 seconds: a brief lead-in, tap E to throw, then hold W throughout so the rope sets around one second in and the climb continues from there.
Actually I think I should reconsider using ROPE8_X (63) instead, giving the rope more vertical room, and extend the action duration to the brief's stated max of 3.0 seconds. That gives roughly 1.9 seconds of actual climbing after the throw, which is much stronger evidence of the hand-over-hand cycle, and I can just note the deviation from the "~2.5 s" target in my report.
But I should double-check what happens if I hold the climb key the whole time while standing near the rope column — holding it while standing might trigger a "peek up" behavior after a short delay, shifting the camera framing upward by several tiles even though it wouldn't change the character's actual feet position that my crop follows.
To sidestep that oddity, I could press the climb key only once the rope is actually near being set, catching it reactively right as it becomes grabbable rather than holding it the whole time.
But I need to check whether grabbing the rope requires being airborne or if it also works standing — I should look at the grab condition and the climb/peek clamp logic in controller.lua, specifically the rope handling section around lines 450-560.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '470,530p' controller.lua ...23:05:12Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '470,530p' controller.lua ...Thinking23:05:26
Good, grabbing from standing works since the head position falls within the rope's span, so it grabs right as the rope finishes unrolling to row 11. Now I'm figuring out the top climb boundary calculation for the rope.
With the player starting at y=11.6, climbing at 3 tiles/sec, they'd need 2.4 seconds to fully top out at row 4.4, but with only about 1.95 seconds of climb time after the grab, they'd end up around row 5.75 without fully reaching the top. I want to verify the call site for the rope grab requires holding up while standing, and confirm the grab timing lines up correctly with when the rope phase transitions to 'set' at bottom_ty=11.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "try_rope_grab\|peek_hold...23:05:26Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "try_rope_grab\|peek_hold...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '660,760p' controller.lua23:05:26Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '660,760p' controller.luaThinking23:06:09
Good, rope grab from standing works, and crouch-walking on flat floor avoids the lip-clamp behavior since there are no lips there. I'm checking how the pose_sheet's put function resets the player position and state before snapping the camera, and noting I'll need to load the walls room separately for that test. Still thinking through the crop and anchor details.
Following fall_land with the camera tracking the feet, the character stays centered during the seven-tile fall while walls scroll past, landing with a squash effect. I'm now scripting the hang_climb sequence — walking to the calibration position, jumping to grab the two-tile step, then holding up to mantle onto it — timing out roughly which frames to press space, release it once hanging, and when to trigger climb_up, trusting the state machine transitions from hang to climb_up on the up input.
For slide_walljump in the walls room, I'm setting the initial fall state with facing set explicitly per action since the default reset conflicts with the wall pose's facing. I'm also checking that HUD and UI elements sitting in screen space mostly fall outside the cropped view around the character, given the camera anchor puts the character around 40% down the frame — though I need to double check exactly where the feet land relative to that anchor point.
Working through the crop bounds, the character sits comfortably within the 64x48 window even accounting for camera tween lag during fast falls or terminal-velocity drops, so edge clipping shouldn't be an issue there. I'm now checking whether a horizontal run at typical speed causes similar lag that might push the character toward the edge of the crop.
Since Pillow's crop function pads out-of-bounds areas with black rather than raising an error, I can safely use it even if the crop box occasionally extends beyond the frame, avoiding any jarring camera jumps — I'll just track and report how often that happens. Next I want to confirm the frame counts stay consistent across the three GIFs in a row.
Confirming engine_step semantics next: each call advances rendered frames at 60Hz, so capturing every other rendered frame gives 30 captures per second. Now I'm starting to write the Lua capture tool...
Adding output/raw directories and checking clear spawn coordinates...
I need rows 0-7 spans to see what's above col 57. Looking at row 8, cols 47-56 are solid; rows 0-3 have extra blocks that form ceilings for the ropes, so I'm mapping which row each rope anchor sits below based on where those blocks end.
Checking the walk and run paths from col 57.5: walking 11 tiles reaches 68.5, clearing under the rope-8 ceiling at cols 60-67 which sits high up out of frame. Running at 10 tiles/sec for 2 seconds reaches roughly col 76.5, which puts it under the rope-4 ceiling spanning cols 70-77 — I need to verify the floor surface height to confirm clearance there.
I'm confirming the ceiling at cols 70-77 sits well above the visible crop (about 96px above the feet versus a 38px crop margin), so it won't intrude on frame, and the floor row stays solid through col 81 so there's no pit risk. I'll settle on FLAT_X = 57.5 as the shared starting point for walk, run, jump, and crouch_walk, and I should double-check nearby room labels for calibration accuracy.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "labels" rooms.lua | head...23:06:09Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "labels" rooms.lua | head...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '320,350p' rooms.lua23:06:09Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '320,350p' rooms.luaThinking23:07:59
Checking the ROPE labels' vertical positions relative to the crop frame — ROPE 4 sits too high above the feet to appear in frame, same with ROPE 8. But during the run animation, the character's x-position does cross x=68.8 since it starts around 57.5.
Similarly the walls room labels sit well above the crop, so they're safe too. Now I'm setting up the Lua script that generates the motion sheet output directories and defines constants like ground level, flat starting x, and pit positions for the calibration setup.
Continuing with input handling helpers for pressing and releasing keys, room and pose setup functions, and a snapshot function that captures frame data and names each output file by preset, action, and index...
Now I'm sketching the ACTIONS table structure, where each action defines a name, frame count, setup logic, and per-frame tick behavior, then starting the run loop that executes an action for a given preset...
For run, I'll reuse the walk setup but also hold shift, so I need to check how the run bind is named in boot.lua's key bindings. For jump, I'm setting up a stand pose then triggering the jump key partway through the sequence, tracking whether the jump has already been triggered so it only fires once.
I'm now working out a simpler explicit script instead: nothing happens for the first 10 frames, space stays held down through frame 44, then releases, and I need to calculate the apex timing given the gravity ramp to make sure that window matches roughly 1.6 tiles of height.
Since jump_hold_time is 0.3s (18 frames), the full height is locked in by f=28, so I'll release space at f=30 and expect landing around f=48, holding space from f=10 to f=30 avoids any accidental re-jump since it stays released through f=90. I'll use an explicit deterministic script: press space at f=10, release at f=30, relying on edge-detection so the jump fires once at f=10 while the hold ramps gravity.
Now I'm setting up the fall_land test case with a fresh calibration state, positioning the player near the pit edge, and stepping the engine forward before advancing further.
For pit 3, holding 'd' right from the walk means covering 1.5 tiles (16 frames) before falling 7 tiles (32 frames), landing around f=50, but I need to check whether the character then keeps walking into the pit's right wall at col 100 and stops correctly against it.
I'm reconsidering the timing — releasing 'd' right at landing gives a cleaner squash-and-settle, but a simpler approach is holding 'd' for only the first 20 frames so the character walks past the lip at x=96.0 into the pit with momentum, then falls freely and lands inside without further input.
Actually rechecking the floor layout: row 12's solid spans mean the ground at columns 93-95 is really the narrow wall between pits 2 and 3, so standing at x=94.5 puts them on that block, and they'd only leave the floor once the box crosses past column 95.3 rather than 96.0 as I assumed.
Reworking the timing: they walk off around x≈96.3, giving a distance of about 1.8 tiles from 94.5, which at 5.5 tiles/sec is roughly 20 frames — matching my earlier estimate. I'll hold 'd' until on_ground becomes false rather than a fixed frame count, since that's more robust, then release once airborne.
Now checking the fall: dropping from y=11.6 down to the pit floor at y≈18.6, a 7-tile drop, and computing the fall time under gravity 50 starting from zero vertical velocity.
Since terminal velocity of 18 t/s gets hit partway through, I need to split the fall into an accelerating phase (3.24 tiles, 0.36s) and a constant-speed phase (3.76 tiles at 18 t/s, 0.21s), totaling roughly 0.57s or 34 frames, landing around frame 54. That leaves about 66 frames of settle time to reach 120 total, and the fall distance stays under the 8-tile threshold so there's no fall damage.
Now I'm setting up the hang_climb sequence with a fresh starting state.
Writing tick logic...
Mapping the timeline: 'd' held early, space at frame 10 for the jump, grabbing the ledge around frame 30-40, then hanging for a set dwell before climbing up around frame 60, mantling by frame 75. That leaves the character standing idle for a while afterward, so I'm considering trimming the hang dwell or total duration slightly, though standing still at the end works fine as a settle beat — keeping the total near 150 frames (~2.5s) as briefed.
Now moving to the wall-jump slide test in the walls room: setting up the player mid-fall against the wall, then noting that the setup helper resets facing direction, so I need to correct that afterward. The input sequence holds 'a' initially, taps space briefly around frame 60 to trigger the jump, then releases and switches to holding 'd' to simulate the wall-jump direction change.
I'm double-checking timing details -- confirming 'a' stays held through frame 60 since the slide window lasts about 72 frames, and verifying the ledge-grab logic won't preempt the slide since the drop point sits below the top corner where ledge grab would otherwise take priority.
After the rightward wall jump, I'm tracking the flight across the clear 5-tile lane toward the wall at column 29, calculating that at 8 tiles/sec it takes about 36 frames to cross, landing the character back into a slide around frame 100, for roughly 120 frames total. I'm now checking the exact x-position of that wall's face to confirm the collision point.
But then I realize air drag with a 0.1s halflife decays velocity way faster than I assumed — at that rate the character would only travel about 1.15 tiles, not enough to cross the 4.4-tile gap. Holding 'd' during the jump applies air control acceleration toward the 5.5 tile/sec walk speed cap though, which should let the character maintain enough speed to actually make the crossing in roughly 0.7 seconds.
I'm also checking the fall distance during that time — dropping from y=6.4 over ~0.7s puts them 2-3 tiles down, which is fine since the lane stays open to row 35. To give the jump arc more breathing room, I'm shortening the initial slide to 45 frames, triggering the jump at frame 46, with the state swap at frame 48, leaving 72 frames for the arc and any subsequent slide.
Now I'm setting up the rope test at x=63.5 with a 180-frame duration and 90 caps, spawning the character in standing position and stepping the engine forward before scripting the key presses that grab and swing on the rope.
The 'e' press at frame 6 is edge-triggered so holding it briefly won't spawn multiple ropes, and then 'w' gets held once the rope reaches its set state to trigger climbing. But checking the physics for how long it takes the thrown rope to rise 8 tiles at the given speed and gravity, I'm getting a negative discriminant in the quadratic — meaning the rope may never actually reach that height with these parameters, which needs fixing.
I need to check the flight phase logic to see if it anchors at the apex or on ceiling contact. Working through the timing: throw at frame 6, apex/anchor around frame 45, then unrolling 8 segments takes about 32 more frames, landing set around frame 77, before the climb begins.
That's about 1.28 s of the 3 s budget just for the throw. But for ROPE4_X = 73, the ceiling at rows 0-7 near columns 70-77 would stop the rope early — rising only 4 tiles instead of the full 7.12, giving a much shorter flight time of roughly 0.22 s (13 frames) before it catches.
After that, unrolling takes about 16 frames, landing the anchor at frame 35. Climbing 3.2 tiles to the rope top at 3 tiles/sec takes another 64 frames, topping out around frame 99, leaving the last 51 frames of a 150-frame clip just sitting at the top — so I should add a descend phase where the player holds 'S' to climb back down, filling the remaining time and showing the animation cycle in both directions. I'm sketching out the script logic to check rope state and trigger that climb-down behavior.
Checking the numbers, holding 's' during those last 51 frames would only bring the player down about 2.55 tiles, from 8.4 to roughly 10.95, well short of the rope bottom at 11.6 — so it's safe and won't accidentally cause a fall.
The rope unrolls into 4 segments (8, 9, 10, 11) before hitting solid ground, confirming rope_length_of == 4. That gives a full sequence: 0.1s standing, 0.22s throw, 0.27s unroll, 1.07s climbing up, and 0.85s climbing down — 2.5 seconds total with continuous motion, which is much stronger evidence than the 8-tile rope version. I'm settling on CALIBRATION_ROPE4_X as the answer, with the up-then-down climb over 2.5 seconds, though I want to double check the ROPE 4 label position before finalizing.
Checking the crouch-walk test case next: setting up on flat ground with 's' and 'd' held simultaneously so the character crawls at 1.5 tiles/sec, and confirming that holding 'd' prevents the peek-down behavior that would otherwise trigger since IN.x isn't zero. I still need to verify whether set_crouch requires headroom on flat floor, then check the key name bindings in boot.lua.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '60,100p' boot.lua && echo...23:07:59Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '60,100p' boot.lua && echo...Thinking23:08:08
I realize the rope anchor logic actually picks a neighboring column when hitting the ceiling, not the player's own column — it checks the adjacent column based on which side of center the player is on, falling back to the opposite neighbor if the first is solid.
Checking ROPE4 at x=73.5, the ceiling hit puts the anchor at column 73, row 8, and verify.lua confirms this works correctly.
Now I need to nail down the key names used for input injection — verify.lua uses 'space', 'a', 'd', 'w', 's', 'e', and I want to confirm it uses 'lshift' for the shift bind, so let me check that.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "lshift\|speed_test(" too...23:08:09Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "lshift\|speed_test(" too...Thinking23:08:30
Going with 'lshift'. Now I'm thinking through the snap function and emoji_composite, snapshotting every 2 frames at 480 per preset via engine_snapshot, which I assume runs synchronously. I'm also worried the anchor drive eval channel might time out given 1440 snapshots versus the 24 pose_sheet normally does, so I want to check the eval timeout before running the whole thing.
Rough math: PNG encoding at 640x360 takes maybe 5-10ms, so 1440 writes plus 2880 engine steps should finish comfortably under a minute, so I'll probably just run it rather than dig for a timeout constant. As a safety net I'll add MOTION_SHEET_PRESETS and MOTION_SHEET_ACTIONS globals so the run can be split or a subset re-run if something goes wrong. Before writing the Lua file, I want to double check pose_sheet's put() resets cam_x_fixed to nil, that fresh() calls release() to inject key-ups and step once, and whether room_load clears the ropes table between actions — I should peek at room_load's implementation to confirm.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '440,500p' rooms.lua23:08:30Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '440,500p' rooms.luaThinking23:08:36
Good, room_load resets ropes correctly. Now I'll settle on a manifest.txt format with tab-separated columns for preset, action, index, file, foot offsets, and state, keeping everything in one manifest file so frame counts can be derived by counting rather than needing a separate actions file.
Now let's write tools/motion_sheet.lua.
Now I have what I need. Writing the capture tool.
WriteC:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.lua23:09:17Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.luaThinking23:09:49
I'm double-checking a potential bug where comparing an unset held-key state against false could inject a spurious key-up event, but confirming that the calling code always passes explicit booleans so it's actually fine.
I trace through the other key() calls for space, d, s, and w conditions and they all resolve to clean booleans. Then I focus on the hang/climb-up sequence — checking whether releasing 'w' immediately after climb_up starts could interrupt a timed action that still needs it held.
For action 6, I trace the wall-jump timing: after put() and the extra engine steps, the character briefly free-falls before 'a' is pressed, and holding both 'a' and 'space' for only 4 frames means the wall jump gets a partial, shorter variable-height jump rather than the full 18-frame hold.
I need a proper timed hold to get a good arc — release 'a' at f=50 to avoid pushing back into the wall past the force window, then keep space held continuously from f=46 through f=66 while switching to holding 'd' after f=50 to move away from the wall.
Confirming this works: since input back into the wall is ignored during the force_time window after a wall jump, holding 'a' briefly at f=46-48 while airborne is harmless before switching to 'd' at f=50. I also verify the jump hold at f=10-30 covers 20 frames, comfortably exceeding the 0.3s jump_hold_time requirement, and start checking the timing for action 5 where 'd' is held from f=0 with space starting at f=10.
Now I'm mapping out the step geometry at cols 22-24: it spans rows 10-11, making it two tiles tall with the top surface at row 10, so the grab corner sits at (22,10). Starting from x=20.7 and walking right at 5.5 tiles/sec, I calculate it takes about 11 frames to reach the wall face at x=21.7, which lines up with space being pressed at f=10.
The pose_sheet's reach_hang timing checks out with the same put-then-step-then-key sequence, and hang_climb also matches fine. For action 5, I verify that after put() and a settling delay, pressing 'd' with space triggered at f=10 gives roughly 10 frames of walking from standstill — about 0.75 tiles of movement, landing the character around x≈21.45.
Now I want to confirm update_climb_up doesn't require holding 'w', so I'm checking lines 930-1000 of controller.lua.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '920,1000p' controller.lua23:09:49Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '920,1000p' controller.luaThinking23:09:55
Good, climb_up ignores input once started, so releasing 'w' is fine. But I want to double check the hang branch where IN.up triggers start_climb_up on the same frame — I should look a bit earlier around line 905-930 to confirm 'w' is really the climb trigger and not 'space'.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '896,932p' controller.lua23:09:55Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '896,932p' controller.luaThinking23:10:02
Wait, the mantle trigger actually comes from the jump buffer, not W directly — but the docs describe W as the climb key. I need to check whether W also feeds into that buffer, or if player_update handles input differently elsewhere.
Let me grep for where start_climb_up is called, and also check the verify.lua mantle test around lines 200-241.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "start_climb_up" controll...23:10:02Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "start_climb_up" controll...Thinking23:10:27
So the mantle is triggered by jump, not by holding up, from a hang. I'm now confused by another start_climb_up call around line 933 — it looks like it's outside the update_hang function, so I need to trace the surrounding code more carefully to see what triggers it.
Actually, checking the doc comment block, that line was just referencing the function signature in a comment, not a real second call site — so there's only one real call. The brief's mention of "climb up (W)" is just a factual mislabeling of the key; the actual behavior (hang then mantle up) matches the intent, it's SPACE not W, so this is a minor correction rather than a design change.
I'll implement the mantle using SPACE from a neutral position (no directional keys held), which matches what the brief's described action actually shows despite the wrong key name. Similarly, I confirm the rope-climb uses holding "up" correctly. For the hang state, I'm releasing directional keys and timing a tap of space around frame 20-24 after entering hang to trigger the mantle, checking that this neutral input avoids accidentally jumping away from the wall.
Before that, in the pre-hang phase I hold the direction key and press space starting at frame 10 to initiate the jump toward the ledge. I need to release space once the hang state is reached so the earlier jump press doesn't linger and risk an unintended immediate mantle, even though the buffer window likely expires on its own—better to be explicit and deterministic about it.
I'm verifying the rope-climb condition: the character rises until y drops to the top threshold, then switches to the 's' state, with no stray key presses interfering along the way. The rope column position stays consistent with the starting x, so that checks out too. Now I'm ready to apply the edits.
EditC:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.lua23:10:36Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.luaThinking23:10:39
I'll run a syntax check first, then do a smoke test on a small subset before proceeding further.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor check . 2>&1 | tail -3023:10:43Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor check . 2>&1 | tail -30Thinking23:10:47
Good, 0 errors and 58 warnings matches the existing baseline, so my new file didn't introduce anything new. Now I want to run a quick smoke test with a single preset before doing the full run.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive start . 2>&1 | tail ...23:10:48Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive start . 2>&1 | tail ...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . 'MOTION_SHEET...23:10:48Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . 'MOTION_SHEET...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && time anchor drive eval . --file t...23:10:48Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && time anchor drive eval . --file t...Thinking23:11:16
With 15 seconds per preset, all eight actions completed in about 45 seconds total. Now I want to verify the intermediate frames actually show the intended behavior for each transition, like confirming the jump actually leaves the ground, the hang animation registers mid-climb, and the wall-jump transitions from slide into fall correctly.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && awk -F'\t' 'NR>1 {c[$2"|"$7]++} E...23:11:16Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && awk -F'\t' 'NR>1 {c[$2"|"$7]++} E...Thinking23:12:08
I'm noticing the jump animation has too much dead time — 29 of 45 frames are just standing, with the actual airborne motion only taking 16 frames. I want to trim the standing frames before and after the jump so the timing feels tighter, maybe cutting down to around 36 total frames.
Actually the landing squash recovery accounts for the first 15 of those trailing stand frames, so it's not really dead time — leave the timing as is.
Turning to hang_climb: 50 of 75 captures show 'stand', which is far too much idle time given the mantle finishes early — walk takes 5, jump 3, hang 11, climb_up 6, leaving stand starting around capture 25.
I want to redistribute the timing by extending the hang dwell so it doesn't feel dead: trying a dwell of roughly 44 frames, with hang running captures 9–31, climb_up 31–37, and stand from 37–75, balancing against the ~2.5s target length.
Actually, I think starting the action further back gives a cleaner solution — beginning the walk at x=18.5 so there's about 3.2 tiles of approach before the jump, giving roughly 0.6s walking, 0.1s jump, and 0.7s hang before the climb, which spreads the action out more naturally than a long static dwell.
Actually a fixed frame is fragile — better to make it reactive: hold space once the player's x position reaches HANG_X, matching the exact launch point from pose_sheet deterministically. Since space stays held until the hang state kicks in, this mirrors how get_hang works, so I'll set the starting position a few tiles back from HANG_X at ground level.
Checking placement, starting at HANG_X - 3 puts the body overlapping a solid step tile, so I need to shift the start to HANG_X - 2.4 instead, which clears the step and sits cleanly on the floor. That gives a run-up distance of about 2.4 tiles, roughly 26 frames of walking before the jump triggers, followed by a short jump and hang around frame 36, then a 44-frame dwell.
Actually, sticking with 150 frames (2.5s) makes more sense given the brief calls for "hang_climb" to run about 2.5 seconds. I'll start at HANG_X minus 2.4 with a 44-frame dwell, ending with roughly a second of standing on the step so it reads as a completed mantle — that feels honest to the action.
For the rope sequence: 17 stand frames plus 58 rope frames. I want to verify whether the character actually topped out and returned, since the manifest tracks screen position rather than world y. Doing the math — 58 rope caps at 3 tiles/sec works out to climbing up about 3.2 tiles then descending 2.6 tiles, which matches the intended up-then-down motion, with the initial 17 stand frames representing the throw.
Now checking slide_walljump: 36 slide frames (1.2s), 9 jump frames, 15 fall frames, ending in fall with no second slide. I'm puzzled why there are 36 slide caps when the jump triggers at frame 46 — it seems the state cycles through jump then fall before re-entering slide when hitting the far wall.
For fall_land, walk 10, fall 17, stand 33 caps checks out: fall duration of 0.57s matches, and the 1.1s standing settle time after landing is a bit long against the squash animation but acceptable within the ~2s target. I should verify the actual state ordering to confirm this sequencing.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && for a in jump hang_climb slide_wa...23:12:09Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && for a in jump hang_climb slide_wa...Thinking23:12:26
The slide_walljump sequence looks solid—slide, wall jump, cross, catch and slide again. Hang_climb still needs that 50-cap standing fix, and the jump animation's ending stand phase runs too long at 24 caps when the squash settles in about 15, so I should trim that tail down.
For the jump, I'm weighing whether to trim to 35 caps for a tighter 1.17s loop, but that falls short of the briefed 1.5-3s range, so I'll just keep the full 90-frame jump as specced since the extra rest at the end actually helps the loop read cleanly as stand-jump-land-stand. Now moving to fall_land, I'm trimming its 33-cap tail down to 50 caps total, giving it a 23-cap standing portion at the end.
Weighing whether to shorten the walk or deepen the fall, but I'd rather keep the briefed ~2s duration and clear rest beat since standing frames aren't wasted — they show the idle pose, which matters for comparing the three body builds side by side.
I'll fix hang_climb's duration but leave jump and fall_land at their briefed lengths, then run the smoke test and inspect the crops before doing the full run. I should also verify the feet screen position range to properly size the crop window.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && awk -F'\t' 'NR>1 {if($5<minx||NR=...23:12:29Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && awk -F'\t' 'NR>1 {if($5<minx||NR=...Thinking23:12:34
The feet stay near (320, 154), well within frame, so a 64x48 crop window centered there works fine without going out of bounds. Now I'll fix hang_climb and check the actual images.
EditC:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.lua23:12:37Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.luaNow the Python step.
WriteC:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.py23:13:16Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.pyBashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/motion_sheet.py roun...23:13:16Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/motion_sheet.py roun...Thinking23:13:23
I'll extract a few frames from the GIFs as PNGs and arrange them into a contact strip so I can view several frames at once.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'EOF' import os from P...23:13:29Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'EOF' import os from P...Thinking23:13:50
I'm noticing the actual frame counts are lower than expected—likely because Pillow's GIF writer merges or drops consecutive duplicate frames when saving, which would explain the discrepancy.
So the total playback duration stays intact since durations get accumulated on merged frames, meaning the GIFs should still loop in sync even if their internal frame counts differ. The cleanest fix is to just report the frame count from the manifest (the captured count) rather than whatever Pillow ends up writing into the GIF itself.
Good, so total duration stays fixed at 45*33=1485ms regardless of preset since Pillow accumulates duration into merged identical frames rather than dropping them. The capture count on the page should reflect the manifest's frame count, while the GIF's internal frame count may be lower due to this duplicate merging — since consecutive identical frames (like a settled stand pose) genuinely are pixel-identical, so merging them is correct behavior, not a bug.
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\strip-b-walk.png)
[Image: original 2048x192, displayed at 2000x188. Multiply coordinates by 1.02 to map to original image.]
Thinking23:14:18
The character stays pinned in place while the window and tiles stream past to sell the walking illusion, with legs alternating for the cycle. I'm noticing there's too much empty sky above the head though — the body only fills about half the frame's height, leaving a good chunk of unused space at the top.
I'm also spotting a dark rectangle in the top-left of the first frame that doesn't quite fit — possibly a leftover UI panel or label background bleeding into the sprite strip that needs investigating.
That dark box is the bottom-right corner of the 1-tile-gap tower, visible only in the first frames since the character starts near it. This creates a minor loop artifact since frame 59 jumps back to frame 0 where the tower reappears abruptly. I'm considering shifting the starting position further right so the tower stays out of frame at the loop point.
With FLAT_X at 59.5, the run ends around 79.2, well clear of the pit at 82 — that's safe. The ROPE 8 label sits well above the crop frame, so it's not an issue, and crouch_walk and jump starting from the same FLAT_X are also clear of the tower. Now let me check the other strips.
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\strip-b-jump.png)
Thinking23:14:30
The jump sequence looks right—launch, rise, apex, fall, land, settle. But I notice the low-corridor tower's grey blocks are visible in several frames near the bottom-right, which is distracting; shifting FLAT_X to the right should clear that from view. I also spot a tall grey column intruding in the middle-right of frames 2-4, so I need to adjust for that too.
I confirm that column is col 56's tower edge showing through the crop, so I'll bump FLAT_X to around 59.5-60.5 for clearance, while making sure the run distance still fits before the pit at the far edge. I'll set FLAT_X = 59.5 and check the result, then move on to look at the other strips.
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\strip-b-slide_walljump.png)
[Image: original 2048x192, displayed at 2000x188. Multiply coordinates by 1.02 to map to original image.]
Thinking23:14:33
I'm mapping out the wall-jump slide sequence: pinned against the wall, then launching off, airborne, and catching the far wall. Next I need to work through rope and hang-climb movements.
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\strip-b-rope.png)
Thinking23:14:38
The rope climb sequence reads well—standing, then alternating hand climbs with the ceiling coming into frame by frame 5. Now moving on to check the hang_climb animation from the earlier smoke run, before the fix.
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\strip-b-hang_climb.png)
Thinking23:14:56
Only 5 of the 8 requested cells showed up because the GIF has just 40 merged frames, so picks beyond that were dropped, leaving 0,8,14,20,30. This means my strip indices reference positions in the merged frame list rather than the original capture indices, so I need to account for that mapping when inspecting frames.
I should double-check the page's claim that GIFs in the same row share frame count so they loop in sync — comparing total durations across presets after the full run would confirm that. I also notice a stray "S" label from the calibration room's own annotation showing in one cell (part of "STEP 2 grab" text), which is just leftover from the room's overlay rather than anything meaningful — likely tied to the old smoke run's starting position before the run-up change.
I shouldn't keep over-analyzing this pixel mismatch. Better to move on: verify against the actual raw frames after re-running with the corrected start position, build strips directly from the raw manifest frames instead of the GIF for exact capture indices, and apply the FLAT_X fix before doing the full run.
EditC:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.lua23:14:57Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.luaBashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . 'MOTION_SHEET...23:14:57Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . 'MOTION_SHEET...Thinking23:15:22
The hang_climb distribution looks much better now, with a brief slide(4) that reflects the character wall-sliding against the step's face while rising into the grab—a realistic touch that mirrors how a real jump-into-wall interaction plays out.
I'll leave the slide since the brief's spirit is satisfied and the run-up reads well. Run's ending position checks out fine — it stays on the floor for the full duration with no fall. Now I just need to reset the globals between evals before starting the full run, and clean up the smoke test afterward.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . 'MOTION_SHEET...23:16:07Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . 'MOTION_SHEET...Thinking23:16:10
That gives 1440 frames over 44 seconds. Since physics doesn't depend on presets, the state sequences should be identical across all of them, so I should double check that consistency.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && for p in a b c; do echo "--- $p -...23:16:15Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && for p in a b c; do echo "--- $p -...Thinking23:16:18
Motion is byte-identical across all three presets, and every crop window matches within each row. Time to move on to the Python step.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/motion_sheet.py roun...23:16:21Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/motion_sheet.py roun...Thinking23:16:25
24 GIFs total, 1.6 MB against 18 MB raw, and no clipping warning appeared. Now I want to check that the total durations line up across the three columns in each row, since merged duplicates could throw that off.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'EOF' import os from P...23:16:28Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'EOF' import os from P...Thinking23:17:04
Ah, I see the issue: setting duration=33 gets rounded to centiseconds by GIF encoders, turning into 30ms per frame instead of the intended 33.3ms. That means 60 frames plays in 1800ms instead of 2000ms, so the GIF actually runs about 10% faster than intended.
I could alternate durations (3,3,4 cs repeating) to average out closer to true 30fps, but that gets messy with Pillow's duplicate-frame merging accumulating durations across frames. Since the brief explicitly specifies duration=33, this fast playback seems to be an accepted, if minor, inaccuracy baked into the spec rather than something I need to fix myself.
Since the stated goal is exact 30 fps, I'll implement the 30/30/40 cadence to hit that precisely and just note the deviation as a detail decision, not a design change. I also notice the total durations across presets drift slightly (jump: 1370/1380/1380 ms), which means the three loops would slip out of sync over many repetitions due to how duplicate-frame merging rounds durations.
Testing with three merged frames gives the same 90ms result, so the discrepancy must come from how floor rounding applies across groups rather than the total. I'm working through preset a's numbers: 45 captures merged into 35 gif-frames totaling 1370ms, checking whether summing floor(3.3×group_size) across all groups produces that value.
Each group loses a fraction of a centisecond to flooring, and since different presets group frames differently, those small losses accumulate differently—that's the source of drift between presets. This mostly disappears with exact-integer-centisecond cadences, though not completely, since arbitrary group sizes can still introduce rounding gaps.
If I instead pass durations that are already multiples of 10 ms (like 30, 30, 40), then flooring the sum to the nearest 10 ms is always exact regardless of grouping, since the sum of multiples of 10 is itself a multiple of 10. That means every preset ends up with an identical total duration—45 frames as 15 groups of 100 ms equals exactly 1500 ms—solving both the frame-rate drift and the sync problem so all three animations loop in step forever. Now I want to verify how Pillow actually accumulates the duration list internally to confirm this holds.
I should check the installed Pillow version and confirm that passing duration as a per-frame list is supported, since save_all reads duration from the encoderinfo of the first frame but lists apply per-frame — then implement it and re-measure.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python -c "import PIL; print(PIL....23:17:05Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python -c "import PIL; print(PIL....EditC:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.py23:17:05Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.pyEditC:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.py23:17:05Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.pyBashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/motion_sheet.py roun...23:17:05Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/motion_sheet.py roun...Thinking23:17:27
Now that every row runs the same captured duration and loops in sync across columns, I want to check actual frames from the real round. I'll build strips from the raw frames using the manifest, cropped consistently so indices align with captures, showing all three presets side by side for a couple of actions.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'EOF' import os, colle...23:17:34Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'EOF' import os, colle...
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\g-walk.png)
Thinking23:17:40
Comparing the three builds walking side by side — chibi with huge head and tiny limbs, the middle build, and the long-legged slugcat — the cycle reads clearly with the tiles shifting under their feet as the window tracks them. Now moving on to the hang grid.
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\g-hang.png)
Thinking23:17:56
I'm mapping out the climbing sequence frame by frame — walking in, jumping with arms raised, grabbing the corner edge, hanging, mantling up, then standing on top. Looking closer at frame 26, that vertical bar seems to represent the arm reaching for the corner against the wall's outline.
I notice a faint gray label glyph bleeding into the crop corner from the room's own annotation ("STEP 2 (grab)"), and I'm working out the geometry to confirm it lands inside the capture area. I'm weighing whether to leave it as-is or clear the room labels before capturing, since that text is noise for a pure character-motion sheet, though it means touching the label-drawing layer of the game.
After going back and forth, I decide leaving it in is the right call — suppressing labels would be a silent change to what the frames actually show, the stray glyph is tiny and doesn't violate the brief's verification criteria, and I'll just note it in the report as an observed artifact. Now I'm moving on to the fall grid.
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\g-fall.png)
Thinking23:18:03
The fall sequence checks out: walk, lip, airborne with trailing limbs, mid-fall, the squashed landing pose, then settling — the landing compression is clearly visible in the fifth column. Now I'll clean up the smoke round directory and run the verification battery: anchor check, the full verify.lua suite (216/216), and stop the instance.
I also need to delete rounds/03-motion-smoke since it was a temp artifact outside the scoped paths the brief allows. Let me quickly glance at index.html's head to make sure it's sane before running verify.lua.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && rm -rf rounds/03-motion-smoke && ...23:18:04Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && rm -rf rounds/03-motion-smoke && ...Thinking23:18:10
The page looks good. Now I want to run the verification battery — verify.lua on the live instance followed by another anchor check. Since verify.lua does a fresh reset at the start it should handle the leftover globals fine, but I should properly restart the instance first per the brief's verification sequence rather than relying on the reset alone.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive stop . 2>&1 | tail -...23:18:47Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive stop . 2>&1 | tail -...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -c "^PASS" tools/verify-repo...23:18:47Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -c "^PASS" tools/verify-repo...Thinking23:18:57
All 216 tests passed, so I'll stop the instance and run the anchor check once more. I also want to decode a composed GIF frame directly to verify palette handling stayed intact, and still need to inspect the rope, slide, crouch_walk, and run GIFs I haven't checked yet.
Rather than just grabbing frame 0 from each, I realize accumulating frame durations to sample at true elapsed time would give more meaningful, time-aligned verification across all 24 GIFs.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive stop . 2>&1 | tail -...23:19:05Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive stop . 2>&1 | tail -...
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\gg-rope.png)
Thinking23:19:12
The rope timeline checks out: standing at t=0, throw completing at t=400, climbing through 800/1200, reaching the ceiling at 1600, then descending at 2100, and the colors look correct too. Now let me check the slide animation as well.
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\gg-slide.png)
Thinking23:19:15
The slide to wall jump to airborne to far wall catch sequence checks out across all three presets. Now I'll verify crouch and run before wrapping up.
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\gg-crouch.png)
Thinking23:19:20
The crouch-walk reads well — the body is low and squashed, crawling right, tiles shifting underneath. There's extra empty space above the crouched figure in the window, but that's expected since the window size stays fixed across all rows. Now let me check the run cycle to wrap this up.
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\gg-run.png)
Thinking23:19:23
I'll rerun the anchor check now that I've updated the Lua, then verify git status shows no unexpected changes before writing up the report.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor check . 2>&1 | tail -2 && ...23:19:28Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor check . 2>&1 | tail -2 && ...Thinking23:19:38
Only the three new paths are untracked, and verify-report.txt appears unchanged so it's fine. But the whole rounds/03-motion/ directory is untracked, and that's 18 MB of raw PNGs (1440 files) that would get pulled into the repo if committed — worth flagging before proceeding.
Since the packet doesn't specify a report path, I'll just return the report as my final message rather than writing it to a file. I'm tallying the per-action frame counts and durations (480 frames per preset, 1440 total, 24 GIFs) and confirming index.html only references relative gif paths with no external resources, so I'm ready to write up the final report now.
Done. Everything verified green.
1. Files created
C:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.lua— the capture tool (eval channel)C:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.py— the crop / GIF / page stepC:\Users\a327e\Desktop\a327ex\emojunky\rounds\03-motion\manifest.txt— 1440 lines, one per frameC:\Users\a327e\Desktop\a327ex\emojunky\rounds\03-motion\raw\— 1440 full 640x360 frames (18 MB)C:\Users\a327e\Desktop\a327ex\emojunky\rounds\03-motion\gifs\— 24 GIFs (1.6 MB)C:\Users\a327e\Desktop\a327ex\emojunky\rounds\03-motion\index.html— the page
Nothing else in the project is touched (git status: only those three paths are new).
2. The action scripts, frame counts
Every count is captures (every 2nd rendered frame, 30/s). The state runs below are measured, identical in all three columns.
| action | script | frames | s | states |
|---|---|---|---|---|
walk | flat floor at x 59.5, d held throughout | 60 | 2.00 | walk(60) |
run | same, d+lshift held | 60 | 2.00 | run(60) |
jump | stand, space down at frame 10, up at 30 (past the 0.3 s ramp, released long before the landing so nothing buffers a second jump) | 45 | 1.50 | stand(5) jump(9) fall(7) stand(24) |
fall_land | stand 1.5 tiles left of the 7-deep pit (CALIBRATION_PITS[3]), d held until airborne, then hands off | 60 | 2.00 | walk(10) fall(17) stand(33) |
hang_climb | stand 2.4 tiles back, d held, space pressed at pose_sheet's launch point, hang, space again 50 frames later to mantle | 75 | 2.50 | walk(14) jump(9) slide(4) hang(26) climb_up(6) stand(16) |
slide_walljump | walls room, dropped flush on the 30-tile wall's face, a held to 50, space 46-66, d from 50 | 60 | 2.00 | slide(23) jump(9) fall(14) slide(13) fall(1) |
rope | stand under the 4-tile ceiling, e tapped at frame 6, w held from the moment the rope sets, s once it tops out | 75 | 2.50 | stand(17) rope(58) |
crouch_walk | flat floor, s+d held throughout | 45 | 1.50 | crouch(45) |
Nothing was dropped; all eight are on the page.
3. Decisions
- Window 64x48 source px, feet at (32, 38), 4x nearest → 256x192 GIFs. The window is pinned to the per-frame feet, so the character is fixed in frame and the world streams past — which is what makes the three columns comparable, since only the body differs. No frame's window ever ran off the 640x360 capture (feet stayed in sx 320..337, sy 138..184).
- The three columns are byte-identical in motion.
D.hh/D.hwand every tuning number are preset-independent, so the same script gives the same physics; I checked it — 0 of 480 (action, frame) pairs differ in feet position or state between a/b/c. A few scripts readplayer.state/player.xto time the next key (release at the apex, mantle after a beat of hang); that stays deterministic for the same reason.math.randomseedis pinned per action anyway, since the look's blink clock draws frommath.random. - GIF frame delay: a repeating 30/30/40 ms cadence, not a flat 33. The brief said
duration=33; a GIF stores delays in centiseconds, so 33 is written as 3 cs and the clip plays 11% fast (I measured 1800 ms for a 2.00 s row on the first build). 30/30/40 averages 33.33 ms, which is exactly 30 fps. It also fixes a second problem: Pillow merges a frame identical to its predecessor into that frame's delay, and which frames repeat differs between the three bodies — with a flat 33 the floor-to-centiseconds loss differed per preset and the row's three clips came out 1370/1380/1380 ms, i.e. drifting apart. With whole-centisecond delays every row is now exactly its captured length in all three columns (verified: walk 2000/2000/2000, jump 1500/1500/1500, etc.), so they loop in step indefinitely. - One shared palette per clip. All frames of a GIF are stacked into one image and quantised together (255 colours, no dither), then upscaled in palette space — a per-frame adaptive palette makes the colours crawl.
- The mantle is SPACE, not W. The brief says "climb up (W)", but
update_hangreads onlyp.buffer: a neutral jump from a hang mantles, and W from a hang only peeks. Same move, different key; I used the real one. ropeuses the 4-tile ceiling (CALIBRATION_ROPE4_X), and climbs back down at the end. Under the 8-tile ceiling the throw arc plus unroll costs ~1.05 s of a 2.5 s clip with the character standing still. At the 4-tile ceiling the rope is set in ~0.55 s, the climb tops out around 1.6 s, and holdingSfor the rest shows the hand-over-hand cycle running the other way instead of a static hang at the anchor.fall_landuses the 7-tile pit, the deepest one under the 8-tile damage tier, so the landing is a clean squash with no hurt flash or dizzy face confusing the read.- Three globals for re-takes:
MOTION_SHEET_DIR,MOTION_SHEET_PRESETS,MOTION_SHEET_ACTIONS— a run can be split or one action re-captured without redoing the other 22.
4. Verification
anchor check .— 0 errors, 58 warnings (the documentedsound_tuner/UI_TIERSbaseline; the two new files contribute none).- Capture run: 1440 frames in 44 s, no Lua errors, every action reached the state it names.
python tools/motion_sheet.py rounds/03-motion— 24 GIFs + page, no out-of-bounds windows.- Fresh instance,
anchor drive eval . --file tools/verify.lua— 216 passed, 0 failed. - Looked at, as three-preset grids:
walk(frames 1/8/15/22/29/36),hang_climb(1/12/20/26/45/58/66/75) andfall_land(1/9/16/26/29/32/38/50) cropped straight from the raw PNGs; andrun,rope,slide_walljump,crouch_walkdecoded back out of the finished GIFs and sampled by elapsed time (so the samples are time-aligned across columns). The character is in the window in all of them, doing the named action, the window never jumps — what moves is the world under it. The landing squash is plainly visible infall_land; the rope's hands alternate; the wall jump leaves the face and catches the opposite one.
5. Noticed
rounds/is not gitignored, sorounds/03-motion/raw/is 1440 untracked PNGs, 18 MB, sitting in front of the next commit and the per-turnai/journalsnapshot.rounds/01-poses/raw/(24 files) set that precedent at a size that didn't matter; this one does.rounds/*/raw/in.gitignorewould keep the GIFs and the page tracked and leave the frames out — I did not touch.gitignore, it is outside the scope.hang_climbpasses through 4 captures ofslidebetween the jump and the grab: arriving at the step at full walk speed withdheld puts the box on the face before the hand window catches the corner. It is the real controller doing a real thing, and it reads as a scramble up the ledge, but it is not in the brief's description of the action.- The calibration room's own annotation bleeds into two of the
hang_climbframes — the descender ofSTEP 2 (grab)shows as a faint greySin the top-right corner once the character is standing on the step.pose_sheet.luadodges the labels by choosing positions; here the character walks through them. Suppressingmap.labelsduring capture would remove it; I left the room as it is rather than silently changing what the frames show. jumpandfall_landspend their tails standing (24 and 33 captures). The first ~15 of those are the landing spring recovering, which is worth seeing; the rest is a rest beat that makes the loop read as one cycle. Both durations are the brief's. If he wants them tighter, 70 and 100 frames would cut the dead air without losing anything.- Preset
a's head is wide enough to overlap the window's top edge assumptions nowhere, but it does sit noticeably higher in frame thanc's — the feet anchor means the three bodies are aligned at the floor, not centred, which is the right alignment for comparing them and worth knowing when reading the page.