emojunky: character round 4 (juice, chibi variants, motion variants, picker)
Transcript
packet: brief.md23:37:24
# emojunky — character round 4: juice, chibi proportion variants, motion variants per action, a live picker
You are implementing under an agreed brief written by Fable (Claude), who is
directing this work for the owner. The brief closes the high-level decisions;
the details are yours to decide, and you list the ones you made in the report.
Where the brief is silent on something that would change the approach, where it
turns out to be wrong, or where a step would reach outside the scope below --
other people's servers, rate limits, large downloads, disk, network, money,
anything the brief did not put in your hands -- stop and report instead of
choosing. Read `C:/Users/a327e/Desktop/a327ex/emojunky/.claude/CLAUDE.md` for
project facts (paths, docs, commands, gotchas); its process rules about briefs
and asking the owner bind Fable, not you. Do not commit, push, run the game
interactively (never `run.bat`), or touch files outside the scope. End with the
report in the format given.
## Task
The owner chose the chibi build (`T.look.preset = 'a'`) and wants three things
he can see and swap live: (1) JUICE — the arms, head and torso stop being
static and follow, lag, lean and overshoot with every movement, differently per
movement; (2) VARIATIONS of the chibi proportion (head / torso / limb ratios);
(3) VARIATIONS of how the limbs move in each action (two or three styles per
action). An on-screen picker shows the current choice on every axis and keys
cycle them, so he can compare freely while playing. The motion-sheet tool
then captures the options onto a new page `rounds/04-juice/`. The controller
(`controller.lua`) stays untouched: everything here is drawing.
Read first: project CLAUDE.md; `view.lua` (the whole look section: `look_*`,
`human_look_*`, `draw_human`); `T.look` in `tuning.lua`; `tools/motion_sheet.lua`
+ `.py`; `emoji/juice.lua` (springs helpers) and `anchor/spring.lua`,
`anchor/timer.lua` (tweens); `reference/character-research.md` "Procedural
technique" (Rosen: key poses + phase by distance + secondary motion; Celeste's
lag chain; Little Polygon: lean from acceleration through a low-pass; Juckett:
underdamped for bounce, critically damped for tracking).
## Approach
### 1. Juice — the standing layer every action gets
Add a secondary-motion pass on top of the pose targets, before the springs:
- **Head lag and overshoot.** The head's target is where the pose puts it, but
the head spring is softer than the torso's, so on every acceleration the head
trails and then overshoots: down into a landing, up out of a jump, back on a
launch, forward on a stop. Add a small lean of the head along the body's
acceleration (low-passed), so it "looks" into the movement.
- **Torso lean from acceleration and velocity.** The torso angle gets a lean
term: forward with horizontal speed (more in run), back on a hard stop, tilted
along the velocity vector in the air. Low-pass the acceleration so it does
not jitter at 120 Hz.
- **Arm follow-through.** The arms' targets stay as the pose says, but their
springs are the softest of all, so arms swing after the body: forward on a
stop, up on a landing, back on a launch. In walk/run the arms swing opposite
to the legs, driven by the same step phase.
- **Stretch along velocity.** The whole body scales slightly along the velocity
vector (stretch when fast, squash on impact), on top of the existing squash
springs; keep it subtle (a few percent at walk, more at terminal fall).
- **Idle breathing.** A slow rise and fall of the torso and head while
standing, so a held pose is never frozen (Rain World's "always doing
something"); the arms drift with it.
- **Turnaround.** On a facing flip the springs currently snap. Instead the
head and arms should carry through the flip and settle (only positions that
would cross the body need a snap; decide what looks right, and keep the snap
for teleports).
- **Per-action juice, in addition:** landing = head dips into the squash then
bounces, arms swing down then back, knees bend deeper with impact then
recover; hang = the body swings under the hands after the catch and damps
out (a pendulum on the hip spring), legs dangle with lag, head looks up at
the corner; climb_up = head first, torso follows, legs tuck then plant; wall
slide = body pressed to the wall, the free arm drags upward, head tilted
away; wall jump = kick off (the wall leg extends), body rotates away; rope =
the body sways with the hand cycle, legs pump alternately, head tilts toward
the reaching hand; crouch = head drops with lag, arms come forward and low;
crouch walk = a waddle (larger horizontal bob).
Everything above has a strength knob in `T.look.juice` and a master level the
picker cycles: `off`, `low` (about half), `full`. `off` must reproduce round
3's motion so the owner can compare.
### 2. Chibi proportion variants
`T.look.presets` gains chibi variants, all in the 20-24 px standing / <= 12 px
crouch envelope; keep `a` as it is (the baseline he chose) and add at least four:
- `a2` bigger head, shorter torso (two heads tall)
- `a3` longer legs, short arms
- `a4` slightly smaller head, longer arms (this one fixes the chibi head
sitting above the ledge in a hang: the arm must reach over the head)
- `a5` wider, pill-shaped torso, stubby limbs
Drop `b` and `c` from the cycle (leave their tables in place, cycle only the
chibi set). F2 cycles the variants; the picker names the one in use.
### 3. Motion variants per action
For each action, two or three styles the owner can switch between while the
action is happening. Style 1 is always the current behaviour. Suggested
alternatives (yours to refine; make each visibly different, not a tweak):
- **walk:** (2) bouncy hop-walk — both feet leave the ground each step, body
bobs high; (3) long stride — twice the stride, fewer steps, deeper knee.
(Both are DRAWING only; the controller's speed does not change.)
- **run:** (2) sprint — strong forward lean, arms pumping; (3) bounding — a
gallop where both feet land close together.
- **jump:** (2) arms back like a diver; (3) tuck — knees up, arms forward.
- **fall / land:** (2) arms up flailing, legs cycling; (3) cannonball — tucked,
then a big splay on landing.
- **hang / climb_up:** (2) reach — while airborne and a corner is within about
a tile ahead, the near arm already stretches toward it (probe the tiles
ahead the way the controller's `ledge_grab_at` does, read-only); (3) legs
walk up the wall during the climb instead of tucking.
- **slide / wall jump:** (2) facing the wall with both hands on it; (3) back
to the wall, arms spread.
- **rope:** (2) inchworm — legs clamp the rope and pump, arms mostly still;
(3) arms fixed high, the body swings side to side.
- **crouch:** (2) a ball — the head ducks between the shoulders; (3) a low
lunge, one leg forward.
The active variant per action lives in `T.look.variants = { walk = 1, run = 1,
... }` (hot-reloadable) and the `[` / `]` keys change the variant of the action
the character is CURRENTLY in (map controller states to actions: stand/walk ->
walk, run -> run, jump -> jump, fall -> fall, hang/climb_up/lower_off -> hang,
slide -> slide, rope -> rope, crouch -> crouch).
### 4. The picker
A small panel on `ui_content` (screen space, `fonts.debug`, top-left below the
hearts, or wherever it does not cover the HUD), shown by default in rooms 1-3
and hidden in room 4 unless F1 is on; `F3` toggles it. It lists: the
proportion variant (F2), the juice level (`-` / `=` keys, or another free pair;
check `boot.lua` for taken keys), and every action with its current variant
number and name, the current action highlighted, with `[` `]` shown beside it.
Every key writes into `T.look`, so a save of `tuning.lua` and the keys agree.
### 5. The evidence page
Extend `tools/motion_sheet.lua`/`.py` (they already take `MOTION_SHEET_DIR`,
`MOTION_SHEET_PRESETS`, `MOTION_SHEET_ACTIONS` globals) with a
`MOTION_SHEET_VARIANTS` axis and a `MOTION_SHEET_JUICE` level, and produce
`rounds/04-juice/index.html` with three sections:
1. **Juice**: the eight actions, baseline `a`, columns = juice off / low /
full.
2. **Proportions**: walk, jump and hang_climb rows, columns = the five chibi
variants, juice full.
3. **Motion variants**: one row per action, columns = its variants (1, 2, 3),
baseline `a`, juice full.
Same capture conventions as round 3 (every 2nd frame, feet-pinned 64x48
window, 4x nearest, synchronized delays, one palette per clip). About 70
clips; the raw frames are gitignored already.
## Interfaces
- `view.lua`: the look section only. `controller.lua`: READ ONLY. `boot.lua`:
the new binds (F3 panel, `[`/`]`, the juice keys). `main.lua`: key handling
next to F1/F2. `tuning.lua`: `T.look.juice`, `T.look.variants`, the new
presets. `tools/motion_sheet.lua` / `.py`: the new axes. `.claude/CLAUDE.md`:
update the round paragraph and the controls.
- `tools/verify.lua` stays 216/216 (drawing only). `tools/pose_sheet.*` should
still run; re-take `rounds/02-flat` is NOT required.
## Decisions closed
The juice list and the three-level master; the five chibi variants' character
(numbers yours); the variant list per action (yours to refine but each must be
visibly distinct and style 1 = current); the picker's contents and keys as
above; the page's three sections. Yours: every spring value, lean/lag
magnitudes, how the reach probe works, what the panel looks like, capture
durations.
## Scope / stop conditions
May touch the files named under Interfaces plus `rounds/04-juice/`. Stop if:
a juice item cannot be done without changing `controller.lua`; the verify
suite fails; the capture tool cannot reach a variant's action; anything that
needs `emoji/`, `anchor/` or engine changes. If the round runs long, ship
sections in this order and report what is missing: juice -> picker ->
proportion variants -> motion variants -> page.
## Verification
anchor check . # 0 errors
anchor drive start .
anchor drive eval . --file tools/verify.lua # 216 PASS
anchor drive eval . "MOTION_SHEET_DIR='rounds/04-juice' ... " / --file tools/motion_sheet.lua (however you structure the three sections)
anchor drive stop .
python tools/motion_sheet.py rounds/04-juice
Look at frames of at least: walk at juice off vs full (the arms must swing
and the head bob), fall_land at full (head dip + arm follow-through), hang
(the sway), each proportion variant standing and hanging, and one alternative
variant per action. Check nothing is drawn below the floor line in grounded
poses and no limb stretches across the frame.
## Report format
1. What changed (file, function, one line each). 2. The juice items, one line
each with their knob names and default magnitudes. 3. The five presets'
numbers (a table). 4. The variant list per action as implemented, one line
each. 5. The picker's keys. 6. Verification (counts, which clips you looked
at). 7. Stopped on / shipped partially. 8. Noticed, left alone.I'll start by reading the brief in full.
ReadC:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\emojunky-character-round4.md23:37:28Output not recorded
C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\emojunky-character-round4.mdI'll read the project docs and the key source files now.
Bashcat "C:/Users/a327e/Desktop/a327ex/emojunky/.claude/CLAUDE.md"23:37:30Output not recorded
cat "C:/Users/a327e/Desktop/a327ex/emojunky/.claude/CLAUDE.md"Bashls -la "C:/Users/a327e/Desktop/a327ex/emojunky/" && echo "---TOOLS---" && ls -la...23:37:30Output not recorded
ls -la "C:/Users/a327e/Desktop/a327ex/emojunky/" && echo "---TOOLS---" && ls -la...Thinking23:37:36
I need to check view.lua's look section, tuning.lua's T.look, boot.lua, main.lua, and the motion sheet files to understand how they connect. Since view.lua is large, I'll grep for the relevant look section specifically.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "^function \|^local funct...23:37:36Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "^function \|^local funct...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && cat boot.lua && echo "=====MAIN==...23:37:36Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && cat boot.lua && echo "=====MAIN==...Thinking23:37:39
Now I'm digging into the look section of view.lua, around lines 200-780.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '180,470p' view.lua23:37:40Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '180,470p' view.luaBashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '470,790p' view.lua23:37:40Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '470,790p' view.luaThinking23:37:45
Let me check the T.look definition in tuning.lua.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "look" tuning.lua | head ...23:37:45Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "look" tuning.lua | head ...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '110,330p' tuning.lua23:37:45Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '110,330p' tuning.luaThinking23:37:54
I notice tuning.lua actually has `preset = 'b'`, but the brief claims the owner chose preset 'a'. I need to check the file's history to see if it was recently changed and reconcile this discrepancy.
Also I should note the round-3 look specs: face_on false, rims 0, palette-colored limbs. Since there have been rounds 2 and 3 since CLAUDE.md was written for round 1, I want to check rounds/03-motion and the motion_sheet tool, plus tuning_derive's D.look, to understand the current state.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '495,545p' tuning.lua23:37:54Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '495,545p' tuning.luaBashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && cat tools/motion_sheet.lua23:37:54Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && cat tools/motion_sheet.luaBashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && cat tools/motion_sheet.py23:37:54Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && cat tools/motion_sheet.pyThinking23:37:59
Now I'm checking the juice helpers and springs files.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && cat anchor/spring.lua && echo "==...23:38:00Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && cat anchor/spring.lua && echo "==...Thinking23:38:04
I want to check the "Procedural technique" section in character-research.md and look at the controller's relevant fields like velocity, state, ground contact, ledge grab, wall side, and rope hang. I should also review the current state of rounds/03-motion and check git log for round 2/3 history.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && ls reference/ && echo "---" && gr...23:38:04Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && ls reference/ && echo "---" && gr...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && git log --oneline -20 2>/dev/null...23:38:04Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && git log --oneline -20 2>/dev/null...Thinking23:38:10
The tree looks clean. Now I want to check the controller for specific fields like velocity, ground state, ledge grab timing, wall side, rope handling, and player reset/facing logic, so I'll grep for those key parts.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "^function \|^local funct...23:38:10Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "^function \|^local funct...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '255,330p' controller.lua ...23:38:10Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '255,330p' controller.lua ...Thinking23:38:16
I want to check rounds/03-motion and look at pose_sheet.lua for reusable patterns, then review draw_hud and draw_debug to see where the hearts and F1 readout sit so the picker won't overlap them.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '786,880p' view.lua23:38:16Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '786,880p' view.luaThinking23:38:25
I'm mapping out the HUD layout—hearts, ropes, and debug text positions—and realize the picker could collide with the F1 debug readout if both are active at the same spot, so I'm thinking about repositioning it, maybe to the right side instead.
Right side works better—top-right below the room name, avoiding the F1 readout entirely. I'm estimating the picker's height at roughly 11 lines and checking it fits without overlapping the help strip, and confirming it stays hidden in the game room unless F1 debug mode is on. Now I need to check where the color palette constants like COL_TEXT and COL_DIM are defined.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '1,180p' view.lua23:38:25Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '1,180p' view.luaThinking23:38:32
I've got a good grasp of view.lua now. Let me check the palette globals in emoji/palette.lua, look at rounds/02-flat and rounds/03-motion plus .gitignore, and confirm tools/verify.lua's assertions are only checking logic, not drawing, so pure visual changes shouldn't break them.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "^\s*\(fg\|bg_color\|blue...23:38:32Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "^\s*\(fg\|bg_color\|blue...Thinking23:41:46
Now I want to work out the implementation plan before writing code. I'm reviewing the current pipeline in `human_look_update` — blink clock, rope distance, snap detection, computing raw look targets, foot planting, and spring-based interpolation across the limb joints — to figure out where the juice layer should hook in.
I'm sketching two new pieces: a motion sensor (`look_sense`) that tracks low-passed acceleration and velocity in local facing space, air time, landing timers, a pendulum swing spring for hanging, and a breathing phase accumulator; and a target-modification pass (`look_juice_targets`) that adds torso lean, head lean offset, arm offsets, and per-action extras after the base targets and foot planting but before the springs run. I also want to soften the springs per body part — splitting head, hip, and arm frequencies apart instead of sharing body_freq and limb_freq across all joints.
Legs need to stay at their current stiffness since their stepping targets already move in world space and softening would cause foot sliding, so only arms get the softer follow-through treatment. To make sure "juice off" still reproduces the exact original motion, I'm planning to recompute each spring's stiffness and damping every frame by lerping between the base and juiced frequencies using the juice amount (0, 0.5, or 1) — cheap enough to do for all twelve springs each frame rather than needing a separate reapply-on-change function.
Now I need to make sure I clamp the frequency to the 12Hz ceiling since I'm writing k/d directly instead of going through spring_add's validation. For the velocity-based stretch, I'm working out how to scale the body along the actual velocity direction rather than just x/y independently, which means incorporating rotation into the layer_push scaling call.
On a facing flip, I want the world-space pose to stay identical at that instant, so I negate all the x-components of the springs — hips, torso, and limb targets — rather than snapping them. This lets the springs then chase the newly mirrored local targets, producing a natural swing-through instead of a pop, while depth-based near/far limb assignment stays untouched since that's unrelated to left/right facing.
For legs specifically, since foot plants are stored in world coordinates and converted to local via the flip factor, negating their spring x also preserves world position — so planted feet won't jump when the character flips, they'll just barely need to adjust since the target is already world-pinned near the same spot.
I should also negate the velocity component for these x springs, since velocity transforms the same way as position under a flip (world velocity = f times local velocity), so negating local v keeps world v consistent. Snapping behavior should still apply during teleports regardless of the juice setting.
For idle breathing, I want to add a slow sine wave to hip and head y-position during stand and crouch poses, plus subtle arm drift, controlled by amplitude and rate knobs. Then for per-action juice effects, I'm thinking through a landing timer that counts up after a landing event triggers.
The cleanest approach for landing juice is to reuse the existing spring-pull machinery: pulling the hip y and knee y values downward by an impulse amount right after landing, with the head dipping more than the hip, plus a similar pull applied to the arms — this way the spring naturally chases back to target without needing a separate implementation.
For the jump launch, I want the head to lag behind on takeoff (since local y is inverted, that means pulling ky more positive), plus arms swinging back and down. For hangs, I'm adding a pendulum swing spring so the body rotates under the hands after catching a hold, damping out over time — implemented by rotating the hip and knee points around the hand anchor by the swing angle, with legs dangling slightly behind due to lag.
For climb_up, the head should raise early and legs tuck, phased using a timer tracking time spent in the current pose state. For wall slide, the free arm drags upward and the head tilts away from the wall. For wall jump, I'm pulling the wall-side leg outward and rotating the body away from the wall, trying to detect the transition without touching the controller directly.
I want to catch the moment force_t goes from zero to positive as the wall jump trigger. For rope, hips should sway with the hand cycle and the head tilt toward the reaching hand, with legs already alternating. Crouch needs extra forward arm offset scaled by juice, and crouch walk needs a bigger waddle via a sine wave on hip x driven by step phase. Now I'm moving on to setting up the motion variants table.
Each action state maps to its own animation variant — walk and run share stand/walk logic, jump, fall, hang covers hang/climb_up/lower_off, slide, rope, crouch, and dead has none. I need to double check how crouch is represented in the controller state versus the pose mapping to make sure crouch-walk triggers correctly.
Now I'm designing the variant system: I'll dispatch pose targets through a variant function applied after the base pose, adding flags for special stepping rules like a bouncy hop-walk (both feet leaving the ground) or a long stride (double-length steps) for the walk variants.
For the hop-walk, I'll drive a phase off accumulated distance traveled, with the hip bobbing as a sine wave and both feet lifting together during the airborne half, bypassing the normal foot-planting logic entirely. For the long stride variant, I'll reuse the standard foot-stepping function but scale up stride and lift multipliers with a deeper knee bend when a foot swings.
Now I'm sketching the run variants: sprint gets a strong forward lean with big pumping arm swings opposite the legs, while bounding/gallop uses an asymmetric gait with a long airborne phase and feet landing close together before push-off. For jumps, I'm defining pose variants — a diver pose with arms back and legs straight, and a tuck pose with knees drawn up and arms forward. For falling, I'm adding a flailing variant with cycling arms and legs driven by a sine time-phase, and starting to think through a third fall variant.
Cannonball is tucked with knees to chest and arms wrapped, followed by a splay outward on landing — I'm noting that fall and land share the same action per the brief, so the landing splay needs to be keyed by whichever fall variant was active, stored as `lk.land_variant`. For hanging (covering hang/climb_up/lower_off), I'm adding a reach variant where the near arm stretches toward a nearby ledge corner while airborne, which requires a read-only probe function that checks several vertical offsets ahead of the current position to detect a grabbable edge.
Rather than reusing the existing grab check (which would require mutating position state temporarily and risks side effects), I'm writing a dedicated `look_probe_ledge` function that queries tile solidity directly and safely, scanning a couple of columns ahead and a vertical band around the character's box to find a valid edge — solid below, open above.
I'm also noting an oddity in the brief: variant 2's extended reach is nominally a "hang" setting, but it's meant to apply during jump/fall/slide states too. I'll implement it as specified and flag this quirk in my report.
For climb_up, legs should walk up the wall instead of tucking, and during hang the legs press the wall alternately. For slide, variant 2 puts both hands flat on the wall with feet planted and head up, while variant 3 has the back against the wall with arms spread wide — I'm folding the wall-jump push-off and spread-eagle rotation into these same variant numbers. For rope, variant 2 is an inchworm motion where the legs clamp and pump in a large vertical cycle while the arms stay mostly still with small hand separation.
Variant 3 has arms fixed high while the body swings side to side with a sine-based hip sway and legs together. For crouch, variant 2 is a ball shape with the head ducked toward the hip and hands tucked at the sides, and variant 3 is a low lunge with one leg extended forward, the other knee down, and torso upright. Each variant needs a name string for the picker, and now I'm setting up proportion presets — keeping the current preset "a" as-is and adding a2 through a5, cycling through them in order, with adjustments to head, torso, arm, leg, and limb width dimensions.
I'm computing standing and crouching heights from these proportions, targeting roughly 20-24px standing and no more than 12px crouched, and now sketching a2 with a bigger head and shorter torso for a two-heads-tall look, lengthening the legs slightly to compensate and keep total height in range.
Checking crouch height with these numbers gives 12.24, slightly over the 12px limit. Trying head_r 6.8 gets closer but still marginal, so I need to cap the hip contribution to at most 1.87, meaning stand_hip should be no more than 8.5 and leg_len capped around 9.24.
Testing leg segments of 4.6 each with torso 4.5 and head 7.0 gives a stand height just under 20, but bumping torso to compensate pushes crouch over budget again. The head radius is really the bottleneck here — the preset with head 6 hits exactly 12.0 crouch, so any larger head requires shrinking the torso substantially to compensate.
Trying head 6.8 with torso 4.2 works out well: solving for shoulder height gives sh ≈ 9.66, leg segments of 5.25 each, yielding stand height 20.66 and crouch 11.85 — both within range. This gives me preset "a2" with head_r 6.8, torso 4.2, arm segments of 4.0, leg segments of 5.25, and limb width 1.5.
But checking whether the arm reaches above the head for hanging poses, I find arm_len 8.0 falls short of the required 8.56 — the arm can't quite reach above the head. I need to recompute the shoulder offset and hang reach geometry to see how much of a shortfall this really is.
Working through the math, the head's top edge ends up sticking above the ledge by roughly 1 pixel, confirming the exact issue the brief describes: the chibi head peeking above the ledge in a hang because the arm doesn't fully clear over the head. This problem worsens for the a2 pose.
Continuing the math for a3, computing stand height and crouch height from hip/leg proportions, then checking the shoulder offset against arm and torso lengths to see how far the head clears the bar during a hang.
For a4, I'm tweaking head size and arm length so the head clears below the ledge during the hang: with a slightly smaller head and arms lengthened to about 9.6 units, I get roughly 1.58px of clearance, and I set matching leg segment lengths for a 9.2 total leg length.
Now computing standing and crouching heights: stand height comes to about 20.06 and crouch to about 11.52, with limb width, torso width, hand/foot radii, shoulder/hip widths, stride, and lift values set to keep proportions consistent. I confirm the arm reach fractions always stay within bounds for all poses.
Moving to a5, I'm going wider with a pill-shaped torso and stubbier limbs — bumping up head radius, torso length, and torso width for a stockier look, and shrinking the arm segments accordingly.
I keep tuning leg length and head radius to hit the 20-unit standing height target, but that pushes crouch height over 12, so now I need to trim the torso to bring crouch back into range.
Trying legs at 4.4/4.4 gets stand height to about 20.1 and crouch to about 11.96, which works. Checking the shoulder offset against arm length shows a large negative hang value, confirming this variant has notably stubby limbs relative to its torso, which is expected for this body type.
Now I'm working through a5's params: head_r 6.0, torso 6.0, torso_w 4.2, arm/leg segments, limb_w 1.9, and shoulder width 6.1. I realize sh_w needs to equal torso_w plus limb_w so the near arm clears the torso capsule in this side-view projection, which checks out for these values.
I verify preset a's own numbers give the same 1.6px clearance, confirming the rule holds across presets. Since tuning_derive iterates over the presets table automatically, adding new entries just works, though I need to update the preset cycle order to include the new chibi set rather than looping only through a, b, c.
Now I'm sketching out the debug picker UI — a screen-space overlay showing the current body preset and per-animation tuning values (walk, run, jump, fall, hang, slide, rope, crouch), toggled with F3 and editable via keys like F2 and bracket keys.
I'm working out positioning: right-aligned near the top, but nudging the start y-coordinate down in room 4 so it clears the dig HUD, while rooms 1-3 can start higher since the room name label already occupies less vertical space.
For text styling, I'll keep it bare text without a background panel, matching how the existing F1 readout renders—since the layer applies an outline to text automatically, adding a rectangle behind it isn't necessary for legibility.
I'm mapping out the remaining bindings: F2 for cycling proportion, `-`/`=` for stepping juice level down or up, and `[`/`]` for switching between variants of the current action. I need to check the engine's key name table to confirm the correct strings for `-`, `=`, `[`, `]`, then start planning the motion sheet extension with a variant map per action section.
For the capture identity, I'm realizing I need four axes -- preset, action, variant, juice -- rather than the current three, so file naming should become `<preset>-<juice>-v<variant>-<action>-<nnn>.png`, and the grouping script needs to bucket by all four before building GIFs for each of the three sections (juice sweep, proportion sweep, variant sweep). The simplest approach is running motion_sheet.lua three separate times with different global settings for each section.
I'm now weighing whether to have each run append to a shared manifest (adding a MOTION_SHEET_APPEND flag) or make the script handle all three sections in one pass. Given the volume is roughly 4000 total frames across ~70 clips, a single eval call could be slow, so I'm counting clips per section: 24 for juice, 15 for proportions, and working out the variant section's clip count across all eight actions.
I'll design the script to accept configurable lists for presets, actions, variants, and juice levels, plus flags for appending to the manifest and labeling sections. Then I'll split the work into three separate eval calls to avoid timeouts: one sweeping juice levels, one sweeping proportion presets across a few key actions, and one sweeping variant numbers, appending results into a single manifest.
I'm defining the manifest columns—section, preset, juice, variant, action, index, path, sx, sy, state—then rewriting the header and parser to match this tab-delimited format.
Since round-3's manifest differs from round-2's and someone might still run the old dir through the new parser, I'll make it sniff the field count and support both 7-field and 10-field rows, defaulting any missing fields for backward compatibility.
For juice, I'm setting a default 'full' level with named levels (off=0, low=0.5, full=1), and gating everything juice touches — spring frequencies, turnaround snap — behind `amt > 0` so `off` exactly reproduces round-3 motion, while variants still apply independently since they're a separate axis. The new juice logic will live in view.lua as additional look_* functions alongside look_step_feet.
Now I'm working out the ordering inside human_look_update: sensing velocity/state and firing events first, then building the base pose with grab overrides, applying variant pose overrides before stepping, running the foot stepping or variant gait, and finally layering in the juice pass for secondary motion like lean and lag.
I'm realizing there's a subtlety — if torso lean or breathing modifications get applied after look_targets computes the limb roots, the hands and feet won't follow the shoulders correctly. So the cleanest fix is to fold those lean/breath adjustments directly into look_targets, right after the body points are derived but before look_joints runs, so everything downstream stays consistent.
Reordering the pipeline: compute body points first, then apply juice adjustments (lean, breath, head lag, hang swing) and variant tweaks to those points, then derive roots and pose targets from the adjusted values, apply grab and variant overrides plus limb juice, and finally clamp to the floor last since that ordering matters. I also need to account for look_step_feet running afterward since it depends on R.t and can override foot placement.
I'm passing dt into look_targets for phase accumulators, so I need to check where it's called from — likely just human_look_update, but I should verify pose_sheet.lua doesn't also call it. I'm also noting that human_look_update runs at 120Hz in main.lua's update loop, updating both the family springs and the look spring with dt = 1/120, and I need to keep in mind the spring system's frequency ceiling around 12 Hz that spring.lua warns about.
For smoothing acceleration derived from velocity, I'm working out a low-pass filter approach with a time constant around 0.12 seconds, applying it to raw acceleration and clamping spikes so ground friction and step impacts don't cause jitter.
For the landing impact specifically, I'll rely on the explicit land event rather than the smoothed accel. Now I'm thinking through head lag: the head spring should be softer than the torso's, and the head's offset needs to lag opposite to the local acceleration direction to create that trailing effect.
I'll do the horizontal lean explicitly and let the soft spring handle vertical lag, plus an explicit landing impulse. For torso lean, I'll blend velocity and acceleration contributions, clamped, and add a tilt along the velocity vector while airborne. Now I need to write this carefully, checking key names and pose_sheet usage before coding it up.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -rn "look_targets\|look_step...23:41:46Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -rn "look_targets\|look_step...Bashcd "C:/Users/a327e/Desktop/a327ex" && grep -rn "minus\|equal\|lbracket\|rbracket...23:41:46Output not recorded
cd "C:/Users/a327e/Desktop/a327ex" && grep -rn "minus\|equal\|lbracket\|rbracket...Bashcd "C:/Users/a327e/Desktop/a327ex" && ls Anchor/engine/engine/src/ 2>/dev/null &...23:41:46Output not recorded
cd "C:/Users/a327e/Desktop/a327ex" && ls Anchor/engine/engine/src/ 2>/dev/null &...Bashcd "C:/Users/a327e/Desktop/a327ex" && sed -n '4820,4880p' Anchor/engine/engine/s...23:41:46Output not recorded
cd "C:/Users/a327e/Desktop/a327ex" && sed -n '4820,4880p' Anchor/engine/engine/s...Thinking23:41:57
I'm noting the key names for minus, equals, bracket keys, and f3, then checking pose_sheet.lua to see whether the preset list is hardcoded, since adding new presets might require updating its PRESETS list too.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '180,205p' tools/pose_shee...23:41:57Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '180,205p' tools/pose_shee...Thinking23:43:28
Good, the pose_sheet fallback still runs fine unaffected by new presets. Now I'm writing tuning.lua, adding the preset cycle and notes for each variant like 'a' through 'a5' with descriptive labels...
Adding the juice table...
Adding more animation constants...
Adding variant counts and naming each pose style per action - plant/hop/stride for walking, reach/diver/tuck for jumping, and so on down through crouch's ball/tuck/lunge options.
Adding more tuning values...
Actually, this table is getting unwieldy — maybe I should keep per-variant numbers inline in view.lua instead, but the convention I've set is that every constant belongs in tuning.lua for hot-reload consistency, so I should stick with that.
Now I want to think through how the variant gaits actually work mechanically, starting with how distance traveled accumulates in pixels to drive the gait phase.
For the hop variant, I'm working out the timing: feet plant during the first half of the phase cycle and swing forward during the second half, with the hip rising via a sine curve that's zero on the ground and peaks mid-air, giving a bouncy compression-then-lift feel rather than a smooth continuous bob.
Simplifying further: plant the foot pair's world x right when the airborne window ends, using current body position plus a lead offset, then hold that during the grounded phase so the body passes over the feet, and swing between plants with a sine lift during the airborne phase.
Finishing the arc lift calculation, then working out hip bob and foot offsets based on that lift value. I need to make sure hop_x starts initialized to fx, and handle the edge case where the character is standing still so gait_d freezes — I'll force u back to 0 when speed drops below a threshold so the feet don't hang mid-air.
Actually, I realize the hop gait should only engage when the state is actively 'walk' or 'run' (moving), not when standing still with pose 'stand' — that case should fall back to the existing look_step_feet logic, which already handles planting correctly since stepping only occurs when the ideal position drifts.
For the long-stride variant, I'll reuse look_step_feet but let it read stride and lift multipliers from the preset, defaulting to 1 if unset, plus add a hip dip driven by the current swing fraction of the lifted foot. Since look_step_feet runs after the roots and hip height are already computed in look_targets, applying the dip afterward means I need to adjust the timing of when that offset gets folded in.
The tricky part is that shoulders and arm targets won't naturally follow a late hip dip, so I'm restructuring to compute the gait's hip dip first, using only the previous frame's phase, foot x, velocity, and pose fractions, before the roots are derived -- avoiding the circular dependency between gait and body pose.
I realize the hop gait's lift value is a pure function of the distance phase computed this frame, so it has zero lag if I calculate it in look_sense before look_targets runs. For long-stride's hip dip I'll accept using the previous frame's swing amount, which introduces only a negligible one-frame lag.
Given the scope, I want to keep things pragmatic: compute gait distance, hop phase/lift, and previous swing fraction all in look_sense, then handle per-variant body adjustments through a dedicated function table keyed by action and variant, applied inside look_targets after the base body points are set.
Actually, I'm reconsidering the structure — instead of three separate tables for body, limbs, and gait, I want a single unified table per action/variant with optional fields for each, which is cleaner. Variant 1 stays as nil to represent base behavior, with display names tracked separately.
The names should live in view.lua's LOOK_VARIANTS table so it stays hot-reloadable alongside the numeric tuning values, and the picker UI can just read names from there. Now I need to update the `look_targets` signature to accept dt, since it's only called from human_look_update, and start drafting the actual view.lua edits — beginning with adding a `look_action_key` helper right after `look_cycle_preset`.
Sketching out the full set of changes: new variant/juice cycling functions, a `look_sense` call added at the top of the update loop, juice and variant hooks wired into `look_targets`, foot-step logic respecting stride/lift multipliers, new gait functions, updated init fields for the swing spring, and reordering the update/land functions to carry turnaround state properly.
I still need to add juice impulses in the jump handler, velocity-stretch scaling in draw_human, a new draw_look_picker function, and help-strip updates in draw_debug, plus key bindings and picker toggling in boot.lua and main.lua. I'm now figuring out the right place to call draw_look_picker in main.lua's draw function, since room 4 doesn't route through draw_hud like the other rooms do -- probably best to call it once after the room-specific draw logic rather than duplicating it inside draw_hud.
I'll insert the call right before the cursor draws, and have draw_look_picker itself handle visibility so it hides in room 4 unless debug mode is on. Now I'm working through the math for the tuning presets, computing the standing height from leg length, torso length with a small tilt correction, and head radius to get exact derived values.
Next I'm computing crouch height using a much larger torso tilt angle, then figuring shoulder offset as a fraction bounded by both head radius and torso length, and finally the hanging clearance from arm length minus that shoulder offset and head radius. I want to plug in my candidate values to check these numbers work out sensibly.
Now I'll compute the preset numbers before writing them.
Bashcd "C:/Users/a327e/AppData/Local/Temp/claude/C--Users-a327e-Desktop-a327ex/3ceaf...23:43:33Output not recorded
cd "C:/Users/a327e/AppData/Local/Temp/claude/C--Users-a327e-Desktop-a327ex/3ceaf...Thinking23:43:38
All five chibi variants fit the target size envelope, with a4 being the one with positive hang clearance as requested. Now I'll update tuning.lua with the preset defaults, cycle, notes, new presets, juice, variants, and vtune settings.
ccd session: mark_chapter{"title": "Tuning: presets, juice, variants", "summary": "Adding T.look.juice, T.look.variants and the five chibi pro...23:43:38Output not recorded
{"title": "Tuning: presets, juice, variants", "summary": "Adding T.look.juice, T.look.variants and the five chibi pro...EditC:\Users\a327e\Desktop\a327ex\emojunky\tuning.lua23:43:38Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tuning.luaNow the presets table.
EditC:\Users\a327e\Desktop\a327ex\emojunky\tuning.lua23:44:00Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tuning.luaThinking23:44:06
I'm figuring out where to place the juice and variants tables in the structure—deciding to insert them right after the rope_foot grab geometry block for better readability near the related springs code.
EditC:\Users\a327e\Desktop\a327ex\emojunky\tuning.lua23:44:48Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tuning.luaThinking23:47:40
I'm moving on to the big change in view.lua, starting by re-reading the current implementation of look_cycle_preset through human_look_update so my edits align with the existing code before rewriting the preset-cycling logic and adding new axis helper functions.
I want to replace the simple three-way preset cycle with one that iterates over `T.look.preset_cycle`, plus add juice/variant helper functions and a LOOK_VARIANTS table. These variant functions need access to roots stored on R (like R.sfx, R.sfy, R.sbx, etc.) so limb-pass functions can compute targets relative to those roots, so I'm restructuring look_targets to stash the local root variables onto R before writing the variant logic, making sure the body pass runs before look_joints.
Now I'm working out the exact ordering: body points get computed first, then variant body function, then juice body effects (lean/breath/head lean/hang swing) applied on top, then roots get stored, then pose targets and grab overrides, then variant limbs, then juice limbs, then floor clamp — since variants alter the base pose while juice layers on top of that pose. I'm second-guessing whether juice body effects like torso lean, which rotates the head around the hip, might conflict with a variant that also sets lean.
I realize the body points are currently computed directly as final x,y coordinates rather than keeping the lean as a separate value, which means a variant or juice effect can't simply add to the lean angle. So I need to restructure things to keep the lean as its own variable, compute the hip position and lean value first (handling special cases like dead or hanging poses separately), and only derive the final knee/head coordinates from hip and lean after all modifications have been applied — then continue into the variant body step.
Writing breathing and lean logic...
For head lean, I'm making the head tilt into acceleration using the forward-axis term. For hang/climb states, I need to rotate the hand and knee points around a pivot stored on the rig by the swing angle, so I'm working out the rotation math around that pivot point.
Since the face isn't drawn, I'm approximating "looking up at the corner" by nudging the head slightly toward the corner position and adjusting its vertical offset. For the climb-up lead motion, I'm phasing the head's lead offset by normalized progress through the climb state's timer.
For slide tilt, I'm shifting the head slightly away from the wall side since the wall faces the local +x direction, and for rope sway I'm making the hip x-position oscillate in sync with the hand cycle's phase.
I need to compute the rope phase earlier in the body pass, before the grab-override section runs, so I'll store it on R using the look-climb data and rope cycle. Then for waddle motion in crouch I'm oscillating hip x and y with the gait cycle when horizontal speed exceeds a threshold, and for wall-jump spin I'm adding a decaying lean away from the wall direction after the jump.
For landing knee bend, that's already handled by the spring pull on hy at the land event. Now for limb juice, I'm working out arm drag: hands should drag opposite the acceleration direction, so on landing when the upward deceleration hits, the arms swing downward in local space since down is positive y.
During free fall though, gravity produces a constant positive acceleration, meaning the arms would trail slightly upward continuously rather than as a transient snap—that's fine physically, arms lag behind the accelerating body. Next I need to figure out arm swing during walk/run, which should move opposite the legs based on the gait's step phase.
I'm deciding to add a separate `look_arm_swing` function called right after the gait update, which reads the front-to-back leg offset and mirrors it onto the arms in the opposite direction so they swing naturally with the stride.
I realize this ordering conflicts with the floor clamp step, since arms sit near the ground during a walk and any y-offset from swinging could push them through the floor. To fix this cleanly, I decide to restructure so the gait update runs earlier, inside look_targets before the floor clamp happens, since all the needed leg/foot data is already available there.
I'll also add per-state adjustments: crouch pushes the hands forward and slightly up, while sliding drags the trailing arm's slot upward along the wall.
For hanging, the legs need to trail the swing motion by offsetting their x-position based on swing angle and leg length, so they lag naturally behind the body's motion. Then I'll set up a spring parameter function that computes stiffness and damping coefficients from frequency and bounce values for each joint.
I'm applying this spring config across hip, head, arm, and leg joints, interpolating between body and limb settings based on the juice amount. I also need a dedicated swing spring for hanging that targets zero with its own frequency and bounce, added during initialization -- though I need to be careful that the snap/reset logic which iterates over all spring names doesn't inadvertently disturb this one.
Now I'm moving into the look_sense function, which computes facing-relative velocity and starts working on clamped, low-pass filtered acceleration.
Finishing the acceleration smoothing, then I need to handle state-change events—tracking how long a state has persisted, and specifically detecting when the player enters 'hang' from another state so I can trigger a swing impulse scaled by catch speed. The tricky part is that velocity gets zeroed by the ledge grab before I can read it, so I need to capture the pre-catch velocity from the previous frame's tracked values instead.
I should double-check that human_look_jump/land are actually invoked from the controller. For gait distance, I need to track position delta using look_sense's own previous-x value rather than relying on the later-updated lk.px, and breath cycles through a simple modulo accumulator. Hop/bound phase and wj_t decay can stay computed within the gait function itself since it already has access to gait_d.
For the facing flip, instead of always snapping, I'm adding a branch: if there's carry amount, call a flip-carry function that negates x and velocity for each spring (scaled by the carry factor), otherwise fall back to a hard snap. I need to also flip the hang swing angle since it's in local space, though feet plants stay untouched since they're tracked in world coordinates. Now I'm working through whether hop_x and hop_from/to also need similar treatment...
For the human draw stretch effect, I'm computing horizontal and vertical squash/stretch based on speed — falling makes the figure tall and thin, running makes it long and flat, clamped to a max stretch, then multiplying that into the push scale.
Checking the edge cases: since feet stay anchored near the origin, the y-stretch barely lifts the feet (negligible pixels), and the horizontal squash keeps the foot circle safely above the floor even at running speeds. Seems fine.
Now I'm looking at the debug picker overlay code — it draws a right-aligned panel listing body type, juice level, walk/run styles and other tunable options, only visible when debug mode is on.
Now I'm sketching the variant cycling logic and the action-to-animation mapping tables that drive look states.
I'm figuring out how the limb and gait functions should interact with the pose data, then reasoning through whether visual variants should scale with the juice intensity or apply independently at full strength. I'm leaning toward treating variants as their own axis that always applies fully, separate from the juice amount, so that "off" juice still reproduces the baseline motion while variants layer on top.
Now I'm writing the walk-hop gait function, tracking whether the character is grounded or airborne within the step cycle and updating hop state transitions accordingly.
I notice the body function runs before the gait update in the execution order, meaning hop_lift reflects the previous frame's value rather than the current one — this introduces a one-frame lag in the bob effect that I should account for.
Now I'm checking the floor clamp logic that keeps feet from going below the ground plane, but I realize hands are also subject to this same clamp — and during a hop, walking hand positions could hover close to the floor level depending on shoulder height calculations across the different presets.
Since hands derive their position from shoulders which derive from hips, they naturally rise and fall with the body during a hop, so that should be fine. Now I'm looking at how the walk gait function temporarily overrides the stride and lift tuning values before calling the step-feet routine, then restores them afterward.
For the body dip effect, I add a vertical hip offset scaled by the swing amount and adjust the lean if present—though technically the dip should peak when a foot plants rather than mid-swing, it still reads convincingly as a deeper knee bend either way. For the sprint variant, I'm adjusting lean and hip height based on standing hip posture, then moving into limb adjustments...
Since arm phase depends on gait timing determined later in the frame, I'm routing the sprint arm pump through configurable scaling keys that the body function sets earlier, so a generalized arm-swing function can read them with sensible defaults. The run sprint body will set these arm and stride scaling factors, which then get consumed downstream by the stride/foot-stepping logic.
Now I'm reconsidering the run bound gait: since both feet land close together, the split factor multiplying stride should actually be small rather than the larger value I initially set, so I need to fix that number.
For the bound, I want the front foot landing slightly before the back one, with both staying close together, so I'm adjusting the split value down and adding a small phase lag on the back foot's lift by reusing the hop gait function with a lag parameter.
Writing gait function code...
Then I'm planning the tuning parameters for walk_hop and run_bound, and sketching a pose-override approach for the jump diver/tuck move using limb target overrides plus a lean adjustment.
I need to guard against a nil lean value since it should never happen during a jump state, but I realize there's an ordering issue: the limbs function computes positions using the original lean before the body function's lean change gets applied to the roots, so the timing is off.
Now moving to the fall flail case, which uses a time-driven sine wave cycle to swing the arms based on the animation phase. Writing the limb position code...
I'm noting that the arm_y offset places hands well above the shoulder for a flailing look, with legs cycling below the hip. Then I'm moving to the cannonball tuck pose and the impulse-based limb splay on landing, before starting the hang-reach variant where an airborne character's near arm stretches toward a nearby corner.
Writing reach-clamping logic...
Now I'm defining a ledge probe function that scans tiles ahead of the player's facing direction, checking a grid of columns and rows near the top of the player's bounding box to find solid ledge tiles for the hand-reach animation.
I need to verify tile_solid's signature in world.lua/rooms.lua before continuing. Now I'm working on the hang wallwalk variant, where legs climb the wall during climb_up and alternate pressing against it during hang, using a sine-based phase animation tied to the wall face.
Placing the feet against the wall face...
Still writing pose logic...
Now I'm working out the lean direction for the wall-facing slide pose — since the character faces into the wall, a positive lean value presses the chest toward it, so I'm setting that to roughly +0.18. Next I'm considering the backed variant, where the back rests against the wall and arms spread out, which flips the lean direction.
Still writing rope-climb positions...
I'm noting that `ph` needs to be shared between body and limb passes, and it's cheap enough to just recompute rather than store it. Now sketching the rope-swing variant where arms stay fixed high on the rope while the body sways side to side, plus starting on crouch/lunge pose overrides.
Rather than replacing the whole look block in view.lua at once, I think it's safer to make targeted edits one at a time — first I want to double check the tile_solid signature and terminal velocity values before proceeding.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "^function tile_solid" -A...23:47:41Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "^function tile_solid" -A...Thinking23:47:49
Those speed values check out. Now I'm moving to view.lua, planning to replace the look_cycle_preset logic with new axis helpers and LOOK_VARIANTS definitions, being careful about function ordering since these reference the look probe helper.
Since Lua resolves globals at call time, ordering isn't strictly an issue there, but I need `tset` defined as a proper global helper rather than a local since it's used inside a table literal. The file-local constants like FRONT_ARM are already defined earlier in the file, so LOOK_VARIANTS placed after them will have access. Time to write the edit.
Now the view.lua look section. First, the axis helpers and the variant table.
EditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua23:49:05Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\view.luaThinking23:49:34
I still need to handle head_pull, which makes a crouching figure duck its head toward the hip. I'm working out the math so the head position gets scaled along the torso vector based on how far it should pull in, using the head ratio as the base offset from the hip.
Now I'm restructuring look_targets: taking the new signature, storing lean, center, and rope coordinates on R, and reordering the calls so variant/juice body effects run before roots, limb effects run after grab overrides, and gait plus arm swing happen before the floor clamp. I need to be careful that hang and dead states skip the lean calculation entirely since they set positions directly, and that the juice body pass gets access to the resolved knee coordinates for the hang swing rotation before finalizing head placement.
After the variant and lean passes run, I recompute the head position from the torso lean angle if set, apply an optional head_pull damping toward the neck, then let juice add its final body-level effects before moving on to root offsets.
I'm double-checking the hang branch: hx/hy/kx/ky get set from the corner position ahead of the variant body function, and since hang's variant doesn't modify them, that stays consistent. I'm also verifying crouch_ball's hip scaling — since hy is stored as a negative value above the feet, multiplying by 0.80 actually raises it toward zero, lowering the hip rather than raising it, so I need to keep that sign flip in mind.
For crouch_lung, scaling hip by 1.20 pushes it slightly higher than the crouch baseline, which makes sense since a lunge shouldn't be as low as a full crouch, and the resulting change is small enough not to affect the crouch box height. Now I'm moving on to writing look_targets, along with setting up R.act from look_action_key and defining the variant.
I realize there's a bug: checking R.st for hang-related states during jump/fall won't work since only the current action's variant is applied, meaning the hang variant's limb logic never triggers mid-air. Since the brief wants a "reach" behavior where the near arm stretches toward a nearby corner while airborne, I need to special-case this — applying the current action's limbs as usual, but additionally checking during jump/fall whether the hang variant is set to "reach" and layering that reach behavior on top.
There's also a usability wrinkle: `[`/`]` while airborne only cycles the jump/fall variant, not hang, so setting the reach variant requires being in a hang state first. I'll flag this in the report and add a note to the picker. Moving on to writing the look_targets code now.
Now the core: rewriting look_targets with the variant and juice hooks.
EditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua23:50:21Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\view.luaThinking23:50:27
I'm updating the `look_step_feet` function so it factors in stride_k and lift_k when calculating foot offsets and step timing, and adds tracking for swing amount.
EditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua23:50:40Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\view.luaThinking23:52:10
I'm adding a new set of juice functions right after look_step_feet, including a clamp helper and related motion utilities, before the human_look_init section.
Now I'm writing look_sense, which resets stride/lift/arm scale keys each frame and detects state transitions—like triggering a swing spring pull when the body catches after a hang, scaled by fall velocity...
Adding wall-jump detection and lean smoothing...
I'm tracking gait distance traveled and updating the breath clock cycle. Then I catch that lk.pvy gets read in the hang-catch branch before reassignment, which is fine since the state-change block executes first, so it correctly holds last frame's velocity. Now I'm checking the swing spring's pull logic for a potential issue.
I'm working through the sign convention for the swing angle — since the character grabs facing the wall and swings forward under momentum, positive rotation should carry the body toward +x locally, so I'm verifying the pivot rotation formula gives the right displacement direction for a point below the hold.
I still need to add `wj_life = 0.30` to the tuning table. And I'm reconsidering the wall-leg extension: since a wall jump flips facing so the wall ends up behind the player (-x local), extending the wall leg to push off means pulling its target backward rather than forward.
Now for `look_juice_lean`, I'm working out how lean is computed from velocity and acceleration factors, adding an air-lean term when the pose isn't grounded, subtracting a wall-jump spin term that decays over the 0.30s window, then clamping the total to `J.lean_max`. I'm also adding a crouch-walk waddle effect that oscillates the hip offset based on gait distance, though I'm applying it to `hx` rather than lean itself, which should still work fine since it happens before the head is processed.
Moving into `look_juice_body`, I'm making the head lean into acceleration (clamped to a max), then adding a breathing effect during idle/hang/slow-crouch states that oscillates hip and head vertical offsets...
Now adding the hang pendulum swing...
Still writing pose logic...
Adding the rope sway for hand cycle, then I catch a problem: rotation about the corner works fine for `hang` since hand targets are pinned to the corner separately, but for `climb_up` and `lower_off` the body points instead derive from the normal hip/lean pose, so rotating those around the corner would displace them incorrectly — I need to handle those states differently.
I'll restrict the pendulum swing to the `hang` state only, since the spring naturally decays and this matches the intended feel of the body swinging under the hands after the catch and settling. I also need to add lagged dangling motion to the legs inside a limb-juice function that reads swing state and timing to drive the arm and leg offsets.
For the arm follow-through, I'm computing drag offsets opposite the current acceleration and velocity, clamping them to a max value, then applying them to the front arm's position unless the state is hang, climb_up, or lower_off.
Actually, hands during slide and rope grip real world points, so dragging them there would visually break the grab connection — I need to exclude those states too for the hands specifically, though that means losing follow-through animation during a slide.
I'm also confirming climb_up and lower_off keep hands anchored to the corner, so I should exclude those, then adding separate touches: breathing drift on hands, forward crouch arm offset, a slide-specific drag on the free arm, and a dangling leg motion for hang.
For the hang legs, I'm working out the sign convention so the legs properly trail behind the swing direction instead of leading it — checking that when the body swings forward, the legs should lag backward relative to it, so the offset needs the opposite sign from what I first tried.
Now I'm sanity-checking the magnitude: with hang_leg at 0.75, leg length around 9px, and angle 0.34 radians, that works out to roughly 2.3px of offset, which seems reasonable even though I'm mixing radians with a length measure loosely.
Moving on to the arm-swing look function, I'm setting it up to only apply during walk or run states with planted poses, computing a timing value from the difference between front and back leg positions to drive the arm motion.
Still writing arm-swing logic...
But I notice a problem — since the arm swing is scaled by the juice multiplier, it disappears entirely when juice is off, even if a swing variant is selected, which conflicts with the idea that variants should be independent from the juice axis.
Actually, without halving, arm_swing 0.26 gives about 1.1px which is too subtle, so I should use the full difference instead, giving roughly 2.2px for preset a and a solid 5.2px pump for sprint. Now I'm sketching out a `look_flip_carry` function that preserves certain spring state values across a flip, like hx, kx, and other tracked coordinates.
The mirroring logic negates x and velocity while preserving a fraction via `keep`, and does the same for swing state -- this keeps world position consistent because world_x is computed from local_x times the flip factor, and both flip together. Now I'm defining `look_spring_params` to interpolate frequency and damping between two tuning presets based on an amount parameter...
Interpolating remaining spring tunings...
Writing the update function logic...
I need to be careful about ordering: look_sense pulls values before look_targets runs, but spring_update happens separately, so I need to make sure the sequence of teleport detection, facing flip, target computation, and spring update doesn't create stale reads between lk.px/py/pf and the newly computed values.
Now I'm defining impulse functions for jump and land events, pulling squash springs on the x and y axes using frequency and bounce parameters from the look tuning table.
Writing landing spring logic...
Actually, thinking about it more, the splay should probably apply regardless of juice level since it's a variant property, not tied to landing squash intensity. I should pull that logic outside the `amt > 0` guard since the landing squash itself is round-3 behavior while the splay belongs to the variant.
Next I need to handle draw_human's stretch, update the draw_debug help strip, and adjust the F1 line about juice/variant, plus double-check the look_sense issue.
Looking at look_sense, it resets `lk.arm_k` and `lk.arm_y_k` to nil, which then falls back to `J.arm_swing` via the arm swing lookup — that looks correct. The stride and lift keys also reset properly to 1. The hop_lift value should decay outside the hop gait, but since it's only read by hop/bound body functions, that's fine as-is. Now I'm ready to write the insertion.
Now the juice layer itself.
EditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua23:53:06Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\view.luaThinking23:53:09
I need to add `wj_life` to tuning's juice table, then move through human_look_init, human_look_update, jump/land, draw_human, picker, and debug in sequence.
EditC:\Users\a327e\Desktop\a327ex\emojunky\tuning.lua23:53:11Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tuning.luaNow human_look_init and human_look_update.
EditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua23:53:21Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\view.luaEditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua23:53:21Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\view.luaThinking23:53:32
The snap loop correctly resets all springs including swing, so that's good. Now I'm moving on to check the human_look_jump and human_look_land functions.
EditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua23:53:37Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\view.luaEditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua23:53:37Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\view.luaNow the stretch-along-velocity in draw_human.
EditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua23:53:53Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\view.luaThinking23:54:12
I'm sketching out a layout for the look picker showing categories like body, juice, walk, run, jump, fall, hang, and slide, with the active option marked in brackets, and planning to place it after draw_debug and update the F1 help strip accordingly.
Still writing draw_look_picker...
I should make the header row highlighted with COL_TEXT, and I need to remember to declare `look_picker_on` as a global in boot.lua.
Now I need to update main.lua for key handling and the draw call, plus bind things in boot.lua. I should also update the F1 help strip in draw_debug and the look line to match.
EditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua23:54:26Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\view.luaThinking23:54:31
I'm double-checking that the debug draw line handles nil actions gracefully, but the way I wrote it with nested calls is a bit awkward, so I want to simplify that line for clarity.
EditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua23:54:32Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\view.luaNow boot.lua binds and main.lua key handling.
EditC:\Users\a327e\Desktop\a327ex\emojunky\boot.lua23:54:37Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\boot.luaEditC:\Users\a327e\Desktop\a327ex\emojunky\boot.lua23:54:37Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\boot.luaEditC:\Users\a327e\Desktop\a327ex\emojunky\main.lua23:54:37Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\main.luaEditC:\Users\a327e\Desktop\a327ex\emojunky\main.lua23:54:37Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\main.luaThinking23:54:54
I need to update the header controls documentation in main.lua as well as .claude/CLAUDE.md, but first I'll run a check to catch any syntax or LuaLS errors early.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor check . 2>&1 | tail -4023:54:58Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor check . 2>&1 | tail -40Thinking23:55:07
Zero errors now, but there's a new warning at view.lua:815 about my gait function call passing 5 arguments when it expects 4 — I need to check that line. I also want to verify the baseline warning count from CLAUDE.md against the sound_tuner warnings to make sure I'm not introducing regressions.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '813,817p' view.lua23:55:07Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '813,817p' view.luaBashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'EOF' import io p='vie...23:55:07Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'EOF' import io p='vie...Thinking23:55:19
Good, 0 errors and 58 warnings confirmed as baseline, all contained in emoji/ files, none in the game's own code. Now I'll start an agent instance and run the verify suite to check the frames.
ccd session: mark_chapter{"title": "Driving the instance", "summary": "Verify suite and first frame inspection against a live agent instance"}23:55:19Output not recorded
{"title": "Driving the instance", "summary": "Verify suite and first frame inspection against a live agent instance"}Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive start . 2>&1 | tail ...23:55:19Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive start . 2>&1 | tail ...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . 'engine_step(...23:55:19Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . 'engine_step(...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . --file tools/...23:55:19Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . --file tools/...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -E "^[0-9]+ passed|passed,|F...23:55:19Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -E "^[0-9]+ passed|passed,|F...Thinking23:56:21
All 216 done, so now I want to visually verify some frames. I'll set up a small check script to capture and save frames into a scratch directory within the project, using the rounds folder since it's already gitignored for raw output.
I'll grab a handful of key poses—walking at both juice levels, falling and landing, hanging, and each preset standing and hanging—then use a python cropper to zoom in on the tiny 20px sprite so I can actually inspect the details. Since motion_sheet already does pinned cropping, I could extend that tool, but for a quick sanity check before the full capture run, I'll write an ad-hoc lua script to snapshot frames plus a python script to tile them into one sheet, making sure the output paths and directories exist and are resolvable for the eval command.
216/216 pass. Now a quick visual sanity check before the full capture.
WriteC:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\check.lua23:56:36Output not recorded
C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\check.luaBashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . --file "C:/Us...23:56:36Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . --file "C:/Us...WriteC:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\crop.py23:56:36Output not recorded
C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\crop.pyBashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python "C:/Users/a327e/AppData/Lo...23:56:36Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python "C:/Users/a327e/AppData/Lo...
Read (C:\Users\a327e\Desktop\a327ex\emojunky\rounds\04-juice\check\sheet.png)
Thinking23:57:19
Something's off proportionally—the head looks way too large relative to the tiny body, like it's swallowing the torso, and the whole figure appears compressed vertically. I'm checking the crop dimensions against FEET_Y and CH values to figure out where the discrepancy in the body's vertical span is coming from.
Actually, this might just be the chibi preset's design, where the head is intentionally as big as the torso. I should compare it against reference frames from the round 3 walk animation to confirm, but I'm also noticing the torso looks unusually horizontal, which could be the lean effect from the walk speed calculation kicking in too strongly.
Let me reconsider the crop dimensions — round 3 likely used a smaller canvas height and zoom than this check, which would explain the character appearing larger without anything actually being wrong. Working through the pixel math, the head width of about 60px at 5x zoom comes out to exactly 12 game pixels, which matches the head_r=6 setting perfectly — so the proportions check out and I was misreading the scale earlier.
To confirm the pose itself matches, I should pull the first frame from round 3's walk gif and compare it side by side against this new render.
Let me compare against round 3's own frames to confirm off reproduces it.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'EOF' import os from P...23:57:21Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'EOF' import os from P...
Read (C:\Users\a327e\Desktop\a327ex\emojunky\rounds\04-juice\check\round3-walk.png)
Thinking23:57:31
Round 3's chibi walk matches my check — big head, small body, limbs poking out — so the blobby build is consistent, which is fine since that's the owner's chosen style. But the differences between off and full states in the walk frames are hard to spot by eye at these sampled instants, so I should switch to printing numeric values for a more diagnostic comparison instead of eyeballing.
I'll sample spring values across a walk cycle at off vs full and print min/max ranges to confirm the juice actually moves things, while also sanity-checking that nothing dips below the floor and no limb over-stretches. Time to run those numeric probes.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && cat > /tmp/probe.lua <<'EOF' loca...23:57:39Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && cat > /tmp/probe.lua <<'EOF' loca...Thinking23:58:11
The juice effect is clearly amplifying the arm swing and head lean, with the near hand's range roughly doubling and the head kx range expanding dramatically, while the legs stay identical since the gait shouldn't change. The hy values barely shift though, so the head bob must be coming from the ky range instead.
The brief calls for the head to bob during the walk, but right now the vertical bob is too subtle since the hip itself doesn't move vertically in the current pose logic. I'm working out how to add a proper bob by tying hip height to the swing phase, since a real walking gait naturally rises when the supporting leg is extended and dips at footfall — using the existing swing_amt value from the foot-stepping logic as the driver for this new juice-scaled bob term.
I want to double-check nothing draws below the floor line — the juice arm drag and arm swing both run before the floor clamp step, so that's safe. The stretch scale during a fall could push feet below ground, but since falling poses don't have the floor flag set and landing has zero vertical velocity, that edge case doesn't actually trigger.
But now I realize the foot circle's vertical radius also gets scaled non-uniformly, turning it into an ellipse — I need to recompute the bottom extent accounting for the radius scaling too, not just the center offset.
Working through the math, since both the target center and the radius get multiplied by the same vertical scale factor ey, the bottom edge lands exactly at 0 regardless of how much horizontal stretch is applied. That's actually a clean invariant — the floor contact stays fixed no matter the scale.
But I'm second-guessing whether the engine's circle actually scales its radius uniformly, or if it might use sx instead of sy. If it did use the larger horizontal scale for the radius while the center still moves by sy, I could get a tiny overshoot below the floor — under half a pixel at max stretch — but that's already how the existing squash springs behave, so it wouldn't be a new problem I'm introducing.
Now I'll move on to adding the walk bob and building out the full motion sheet, making sure to check the idle breathing and crouch poses visually as part of that run.
EditC:\Users\a327e\Desktop\a327ex\emojunky\tuning.lua23:58:13Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tuning.luaEditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua23:58:13Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\view.luaThinking23:58:45
Now I'm moving on to the motion sheet extension, planning updates to tools/motion_sheet.lua and motion_sheet.py — adding new globals for variants, juice, sections, and append behavior, plus giving actions a vkey field.
I'm restructuring the run loop to nest preset × juice × variant × action, so filenames and manifest rows carry section/juice/variant info, while skipping variants an action lacks and restoring look state afterward. I'm debating whether to change the default presets list or keep it consistent with round 4 behavior, leaning toward documenting the new default explicitly.
Writing nested loop code...
For the variant capture logic, I'm resetting every action's variant to 1 except the target action's, so each row only shows one style at a time — this ensures hang variant 2's reach pose only appears during hang_climb's jump phase, while jump/fall rows at other variants leave hang untouched.
On naming, I realize section 1's "full" clip and section 3's variant-1 clip are actually the same capture, so reusing it saves 8 redundant clips instead of re-capturing duplicates. I should include the section in the key so each combination stays distinct and avoids duplicate manifest rows while still allowing this reuse.
Better to let the python infer sections from the axis values itself: section 1 (juice) fixes preset a/variant 1 and varies juice, section 2 (proportions) fixes juice full/variant 1 and varies preset across actions, and section 3 (variants) fixes preset a/juice full and varies variant per action — reusing section 1's full clips as column 1 automatically. That means the manifest just needs preset, juice, variant, action, index, path, sx, sy, state, with no explicit section field, and the eval sweeps become separate runs setting `MOTION_SHEET_PRESETS`, `MOTION_SHEET_JUICE`, etc.
I'm figuring the total clip count and frame budget: run 1 gives 24 clips at ~60 frames each (1440), run 2 adds 12 clips across walk/jump/hang_climb (~720), run 3 adds 16 more (~960), for roughly 52 clips and ~3100 total frames.
I confirm every action has all 3 variants covered, then move to editing motion_sheet.lua to restore look.variants and juice.level settings and add manifest append mode support.
Now the motion sheet tool. First the Lua half.
EditC:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.lua23:58:46Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.luaEditC:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.lua23:58:46Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.luaEditC:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.lua23:58:46Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.luaThinking23:59:12
I'm adding a `vkey` field to each ACTION entry, mapping names like walk, run, jump, fall_land, hang_climb, slide_walljump, rope, and crouch_walk to their shortened key equivalents, then updating the run loop and manifest writing to use them.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'EOF' import io p='too...23:59:15Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'EOF' import io p='too...Thinking23:59:18
Now I need to update the run loop and manifest write section, so I'm checking the end of the file first.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '240,300p' tools/motion_sh...23:59:18Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '240,300p' tools/motion_sh...EditC:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.lua23:59:18Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.luaBashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '295,320p' tools/motion_sh...23:59:18Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && sed -n '295,320p' tools/motion_sh...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import io p='t...23:59:18Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import io p='t...Thinking23:59:50
The replacement likely failed due to line-ending or whitespace mismatches in the file. I want to inspect the actual text around that region to see what's really there before trying again.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python -c " import io s=io.open('...23:59:50Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python -c " import io s=io.open('...Thinking00:00:00
I'm checking that the escaping of tab characters in the heredoc matches correctly between the Python string generation and the Lua source, since the quoted heredoc avoids shell expansion and preserves the literal backslash-t sequence.
The old block should end matching right after `f:close()` with a newline before the return statement, so if there's still a mismatch I need to compare the strings piece by piece to isolate exactly where they diverge.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import io s=io...00:00:02Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import io s=io...Thinking00:00:09
I'm puzzling over why the escaped tab sequence in the heredoc turned into an actual tab character in Python's string—it seems like the quoted heredoc still let a double backslash collapse into a single backslash before Python interpreted it as an escape.
The fix is to just use raw strings in Python instead of fighting with escaping in the heredoc, so I'll redo the approach with r-strings.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import io p='t...00:00:27Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import io p='t...Thinking00:00:30
I need to fix the outdated header comment in motion_sheet.lua that still references the old path and description, then move on to updating the Python file's header similarly.
EditC:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.lua00:00:39Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.luaNow the Python half of the motion sheet.
WriteC:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.py00:01:42Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.pyThinking00:01:47
I need to remove a leftover unused loop from the script and then run the three capture passes. I also noticed the `check/` directory I created isn't gitignored like the raw round-4 directory, so I'll just delete it manually at the end instead of adding it to gitignore.
EditC:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.py00:01:47Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.pyNow the three capture passes against the live instance.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && rm -rf rounds/04-juice/raw rounds...00:02:37Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && rm -rf rounds/04-juice/raw rounds...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . "MOTION_SHEET...00:02:37Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . "MOTION_SHEET...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . "MOTION_SHEET...00:02:37Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . "MOTION_SHEET...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/motion_sheet.py roun...00:02:37Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/motion_sheet.py roun...Thinking00:03:54
With 52 clips gathered, I need to compare walk-off vs full clips, fall_land at full, hang poses, standing/hanging proportions, and alternative variants per action. I'm writing a script to pull four evenly-spaced frames from selected GIFs and stack them into a comparison sheet, starting with the walk-off versus full comparison.
ccd session: mark_chapter{"title": "Frame review", "summary": "Reading the captured clips frame by frame against the brief's checklist"}00:03:54Output not recorded
{"title": "Frame review", "summary": "Reading the captured clips frame by frame against the brief's checklist"}WriteC:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\strip.py00:03:54Output not recorded
C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\strip.pyBashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && S="C:/Users/a327e/AppData/Local/T...00:03:54Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && S="C:/Users/a327e/AppData/Local/T...
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\s1-walk.png)
[Image: original 2334x637, displayed at 2000x546. Multiply coordinates by 1.17 to map to original image.]
Thinking00:04:16
Even at this small zoom, I can spot differences: the "full" row shows more arm movement across frames—orange arm forward, then tucked, then forward again with the blue arm back—while "off" looks mostly static and pinned. Still, I'm noticing an issue with the head that needs checking.
One concern: in "full" the head seems to sit lower, with the body more compressed overall, as if the lean is pushing everything forward and down. I should crop the character region and zoom in further to judge this properly, so I'll extend my strip script to support that extra zoom and crop.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && S="C:/Users/a327e/AppData/Local/T...00:04:26Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && S="C:/Users/a327e/AppData/Local/T...
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\z-walk.png)
Thinking00:04:47
Now I'm sorting out the color mapping: blue is the near arm, purple the far arm, green the near leg, orange the far leg. In the "off" pose, the far arm (purple) appears as a long vertical shape behind, while the near arm (blue) is a smaller blob in the middle.
Comparing the "full" and "off" rows, I notice the far arm swings in and out of visibility across frames, and the near arm shifts position too, but the near arm looks oddly stuck on top of the torso while the far arm disappears behind the body — this matches the round 3 walk cycle I extracted earlier. In the "full" row, the head clearly leans forward and shifts right at frame 24, which seems like a bigger lean than expected, so I want to double check the head's horizontal range against the lean formula I derived.
I'm now worried the running instance might not have picked up the walk_bob change since it started before that edit — I need to confirm whether the engine hot-reloads on file save for agent instances, since if it doesn't, my verification results could be based on stale code.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . 'return tostr...00:04:48Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . 'return tostr...Thinking00:04:56
walk_bob being nil should have caused an arithmetic error, but it didn't — meaning view.lua must also be stale and missing that code path entirely, so the capture ran with the previous, unmodified version of both files.
This suggests the instance isn't hot-reloading external file writes. Rather than debug whether `anchor drive` or `engine_reload()` would fix it, I'll just stop and restart the instance to guarantee fresh code, then re-run the ~15 minute capture.
The instance is running stale code — it doesn't pick up external writes. Restarting and re-capturing.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive stop . 2>&1 | tail -...00:04:59Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive stop . 2>&1 | tail -...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . --file tools/...00:04:59Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . --file tools/...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && rm -rf rounds/04-juice/raw rounds...00:04:59Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && rm -rf rounds/04-juice/raw rounds...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . "MOTION_SHEET...00:04:59Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . "MOTION_SHEET...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/motion_sheet.py roun...00:04:59Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/motion_sheet.py roun...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && cat > "C:/Users/a327e/AppData/Loc...00:04:59Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && cat > "C:/Users/a327e/AppData/Loc...
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\z-walk.png)
Thinking00:08:00
The full version shows clear arm swinging and body bob, while the off version stays nearly rigid, though I notice the head has drifted forward and the lean seems quite pronounced in the full case, so I want to double-check that magnitude.
The lean amount comes out modestly small numerically, but at the display zoom it translates to a visible shift, and the softer head spring makes it lag more against the walk bob. The far arm swinging behind and disappearing behind the body is expected occlusion, so the walk animation reads correctly overall—now I should move on to checking fall_land, hang, and the other presets and variants.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && S="C:/Users/a327e/AppData/Local/T...00:08:01Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && S="C:/Users/a327e/AppData/Local/T...
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\z-land.png)
[Image: original 2210x560, displayed at 2000x507. Multiply coordinates by 1.10 to map to original image.]
Thinking00:08:10
Comparing the landing frame in the full version against the off version confirms the dip and compression reads clearly, while the upright pose in the off version lacks that impact. The stretch during the fall frames is less obvious but the pose still looks reasonable enough to move on. Now I'll look at the hang portion.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && S="C:/Users/a327e/AppData/Local/T...00:08:11Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && S="C:/Users/a327e/AppData/Local/T...
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\z-hang.png)
[Image: original 2210x560, displayed at 2000x507. Multiply coordinates by 1.10 to map to original image.]
Thinking00:08:26
That black rectangle with the blue bar in the "off" row at f25 is odd - it might be the arm fully extended with an outline, but the human layer shouldn't have any outline. I'm wondering if it's actually the crop window running off the edge of the capture, padded with black, which would happen if the feet position pushes the window beyond the 640x360 frame boundary.
Actually, since the script didn't report any off-screen window frames, that's not it either. This looks like it could be the near arm reaching straight up in the jump pose against a dark shadow, but the edge looks too sharp to be the shadow layer. I should just pull up the raw PNG for a-off-v1-hang_climb-026 to see what's actually going on.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && ls rounds/04-juice/raw/ | grep "o...00:08:29Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && ls rounds/04-juice/raw/ | grep "o...
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\raw26.png)
Thinking00:08:49
I found that the picker panel is actually getting drawn into the captured frames — the motion sheet disables debug mode but leaves the look picker on, and it doesn't get hidden in rooms 1-3. Normally it wouldn't overlap the character crop window since the panel sits top-right while the crop follows the character, but at frame 25 the character walks directly under the panel's region, causing an overlap I need to investigate further.
Wait, the picker panel text overlapping in the screenshot is just leaking UI from screen space into the capture — that's a separate bug from the slide state itself. I need to check whether round 3's own gif at the same frame shows this same slide artifact, and also make sure I hide the look_picker during motion sheet, pose_sheet, and snapshot captures so it doesn't leak into future crops.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os from...00:08:55Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os from...
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\cmp-hang.png)
Thinking00:09:35
Round 3 shows the same slide-bar artifact, confirming it's a pre-existing quirk of the capture script rather than something I introduced — `off` reproduces round 3 frame for frame at the hang point, which is strong evidence they match. Now I need to look at the remaining issue with the picker pan.
Since default-on is a hard requirement, disabling it isn't an option. The pragmatic choice is to fix motion_sheet.lua since it's clearly in scope, and quietly apply the same one-line suppression to pose_sheet.lua and snapshot.lua too, since leaving a visible regression in the documented capture tools would be worse than a small out-of-scope touch — I'll just note it clearly in the report.
But rereading the stop conditions more carefully, they're specific and don't flag this case. And tools/pose_sheet and tools/verify.lua are actually named directly under Interfaces, so touching them isn't really outside the stated frame at all.
The safest path is to only edit motion_sheet.lua and flag the pose_sheet/snapshot leak as an unfixed issue outside the listed scope, with the one-line fix noted. Checking further: pose_sheet crops tightly around the character so the panel might only show up if they're near the top-right, but snapshot.lua captures the full 640x360 room, meaning the panel will show up in every frame there.
I keep going back and forth, but the two-line toggle fix for the picker state is purely mechanical and follows directly from the brief's own feature — leaving it broken makes the repo strictly worse. Still, the point of a defined scope is to stop me from making unilateral calls, so I'll fix motion_sheet.lua now since it's clearly in scope, and report the snapshot/pose_sheet leak as an out-of-scope finding with the exact fix spelled out rather than applying it myself.
Actually the black box I flagged earlier was the slide bar, not the panel — let me double-check whether the panel ever actually enters the crop window. Working through the coordinates, the crop is a small box tracking the feet near screen centre, while the panel sits far to the right, so on paper there shouldn't be overlap. But I need to verify against where the character actually stood in that raw frame.
Given the camera doesn't always stay centered depending on room boundaries, the safest path is just checking every manifest row programmatically for overlap between the crop window and the panel's region, rather than trusting the visual assumption. Honestly, it might just be simpler to fix the underlying issue and re-capture everything, even though that costs time re-running all three passes.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os rows...00:09:39Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os rows...Thinking00:09:46
Checking the crop windows confirms none reach the panel region, so the captured page is already clean and doesn't need re-capturing. I'll still add the suppression to motion_sheet.lua to keep future runs safe across different rooms and windows, since that edit won't change the existing output or invalidate the current manifest.
Now let me proceed to review the remaining frames — presets and each variant.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import io p='t...00:09:54Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import io p='t...Now the proportions and the variants.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && S="C:/Users/a327e/AppData/Local/T...00:10:06Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && S="C:/Users/a327e/AppData/Local/T...
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\z-presets.png)
Thinking00:10:15
I'm comparing the five presets and confirming a4 nails the brief — smaller head, long arms, with the head dipping below the ledge and the blue arm reaching over it in the hang pose.
In the walk frames, all limbs stay above the ground line correctly, nothing clips below the floor. Now I'll move on to building one sheet per action group.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os from...00:10:27Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os from...
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\v-walkrun.png)
Thinking00:11:05
Comparing the walk cycle frames, I notice the hop version clearly lifts the body off the ground across all sampled frames, but the feet seem to be constantly airborne with no contact points visible, which seems off given the timing of the cycle.
Doing the math, at 5.5 tiles/s, a 9px hop cycle amounts to roughly 15 hops per second — way too fast to read as a hop, it'll just look like vibration. This matches the existing walk gait's stride issue (already noted in the tuning file as running about 13 steps/sec), so I need to lengthen walk_hop's cycle substantially, maybe to 26px for around 5 hops/sec, and scale the reach to match. I also need to check the ground-contact ratio since the body currently never seems to touch down during the cycle.
For the stride check, I'm looking at whether the leg separation actually reads as a longer stride across frames — it seems the legs stay together longer than expected given the stride calculation, so I suspect the foot-release logic in the step function is keeping a foot planted longer than it should, which would explain why the visible separation isn't showing up until later frames.
The sprint variant clearly reads as distinct with its forward lean and pumping arms, but the bound variant has the same aliasing issue as the hop — the airborne pose only appears at specific sampled frames, and at run speed the bound cycle translates to roughly 16 bounds per second, which is way too fast. I need to lengthen both the hop and bound cycles substantially — setting the walk hop cycle to around 30px to get a more reasonable ~4.4 hops per second.
I'm now reasoning about what a natural hop rate should feel like: a person hops maybe 2-3 times a second, but given the character's small height, a straightforward calculation gives an oddly long bound distance relative to body size. Since the existing walk gait already ships an unrealistic step rate anyway, I'm weighing how strictly to chase physical realism versus matching the brief's description of a "bouncy hop-walk" with high body bob.
So to land with feet slightly ahead of the body, reach should be about 23-24 px. I'll set the hop parameters: cycle 34, ground 0.40, reach 24, lift 1.5, bob 1.1, split 0.30, lag 0 — giving a 3.6px lift and 4.0px hip bob, which feels right. Now I'm working out the bounding gait at a run speed of 10 tiles/sec.
Trying 4.5 bounds/sec gives roughly 53px per cycle, with an airborne fraction around 0.62 meaning the body travels 33px in the air, so reach should be about 36. I'll set run_bound: cycle 52, ground 0.38, reach 36, lift 1.9, bob 1.25, split 0.28, lag 0.20, arm 0.5, lean 0.14. The split value keeps both feet landing close together — about 0.7px apart for the bound and 0.75px apart for the walk_hop, which matches the intended close-together footfall pattern.
Reconsidering walk_stride, I want to widen it for a clearer "double stride, fewer steps" look, but bumping to 2.6 makes the legs splay too much relative to the 14px body width, so I'll settle on 2.4 instead. I'll check the air variants sheet before finalizing all these tuning values together.
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\v-air.png)
Thinking00:11:13
I'm working through distinct air pose variants—reach, diver with arms swept back, and tuck with knees raised and arms forward—making sure each one reads as visually distinct from the baseline, then moving into fall poses starting with a spread position before considering a flailing variant.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os from...00:11:26Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os from...
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\v-hang.png)
Thinking00:11:35
I'm comparing the hang poses across variations: the first keeps legs dangling with the arm straight up, the second shows the arm reaching forward/down toward the corner while airborne, and the third shows legs pressed against the wall for a wall-walk pose.
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\v-slide.png)
Thinking00:11:42
I'm checking the three slide variants against the wall to confirm each pose is visually distinct — the one-side baseline, the facing pose with body shifted and pressed against the wall, and the backed pose with arms spread apart. All three read clearly differently, which is good.
Now I'm moving on to work on the rope and crouch poses next.
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\v-rope.png)
Thinking00:11:51
I'm distinguishing the rope variants by posture: hands alternating for the basic version, a higher clamped body with legs up for inchworm, and a leftward-shifted body and head for the swing. The hands-vs-inchworm distinction feels subtle, so I want the inchworm's compressed, elevated stance to read more clearly.
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\v-crouch.png)
Thinking00:12:16
Comparing crouch pose variants, I notice the second one has the head lowered between the shoulders with the blue arm extending outward — but at frames 14 and 22 that arm dips below the floor line, which is a rendering problem I need to fix.
I trace through the floor-clamping logic: the limb function clamps both the joint and tip positions above the floor level, so in local coordinates nothing should end up below zero. Since the capsule endpoints and radii all stay within bounds, the leak must be coming from somewhere else — maybe how the shoulder root is positioned relative to the clamped joint.
Mathematically the circle should just touch the floor line, not clearly cross it, so I should stop eyeballing and measure the actual pixels instead. I'm going to check the rendered frame directly, scanning for character-colored pixels below the known floor line y-coordinate to see if any limb genuinely extends past it.
I'll do this scan across all frames for the grounded states — stand, walk, run, crouch — comparing the max y of matching pixel colors against the manifest's floor position for each.
A precise check rather than eyeballing: scan every captured frame for body pixels below the feet line.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os from...00:12:27Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os from...Thinking00:13:23
The 1px offset is pre-existing and matches the `off` state, so that's fine. But the crouch_walk variant is 3px below the floor, and that's new — I need to trace it to crouch_ball's hand target coordinates and how the floor clamp handles it.
Tracing further, neither the tip circle nor the elbow capsule clamps produce the discrepancy since both land flush at zero. It's actually the head that isn't floor-clamped at all — crouch_ball pulls the head down toward the hip using a lean-adjusted torso calculation, and working through the hip position, lean angle, and head_pull factor, the head center ends up low enough that its radius pushes the bottom three pixels past the floor. That's the source of the 3px overshoot.
The fix is to clamp the head's y-position in look_targets so it never gets closer than head_r to the floor when floor_on is active — checking against other poses like `dead`, this clamp would be a no-op everywhere except the crouch case, since dead already sits exactly at that boundary and other grounded poses keep the head well above it. So adding this safety clamp is safe and targeted.
Clamping the head to head_r would also flatten the ball variant's intent, since round 3's crouch already has the head at floor level, leaving no room to duck lower. The real fix is to raise the hip slightly and let the head pull into it, so the shoulders rise around the head rather than sinking the whole pose — I'll adjust crouch_ball's hip and head_pull values accordingly.
Testing the numbers though, raising the hip and adjusting lean still pulls the head lower than the floor limit — the torso shortening from head_pull outweighs the hip increase. I realize I need the hip raised much more substantially to compensate for how much the pull-and-lean combination drops the head height.
At this small size the crouch really just reads as a head resting on the ground, so the "ball" impression needs to come from the limbs pulling in tight and the silhouette rounding out, not from head height alone. I'm redefining the crouch to raise the hip for a more compact stack, steepen the torso lean, pull the head in, and tuck the hands and feet close to the body for a rounder shape while still keeping the head clear of the floor.
Checking the numbers, hip=2.30 puts the head bottom just barely below the floor, so I push the hip factor up to 2.55, which lifts the head slightly above ground. That brings the total crouch height to about 12.17px, and I'm now checking whether the brief's 12px limit applies to this pose or only to the core standing/crouch presets.
Rather than keep chasing this exact number, I think the sturdier fix is twofold: add a floor clamp in look_targets that keeps the head from ever dipping below ground (a safety net that's a no-op for the round-3 poses), and separately retune crouch_ball so it doesn't depend on that clamp to look right. I want to verify the clamp doesn't alter any existing round-3 pose by checking it against each floor-enabled pose — stand, walk, run, crouch, and dead — one at a time.
Checking through them, stand/walk/run come out well above the head radius, crouch sits exactly at the clamp threshold so nothing changes, and dead also lands exactly at the threshold with no change. The only wrinkle is that the landing spring can still push the head slightly past the clamped target after the fact, but a brief one-pixel dip during a landing bounce reads as intentional juice rather than a bug, especially since the earlier scan already showed crouch and stand sitting right around that same margin.
Confirming the jump numbers line up between the full and off variants, I decide to move forward with adding the clamp and retuning crouch_ball, then move on to the hop/bound cycles, walk_stride, and rope_inch. Crouch_lunge already looks correct with the forward leg and foot placement, so I'll leave that alone and start adjusting the walk_hop and run_bound parameters — cycle length, ground contact timing, lift height, bob amount, reach distance, split timing, arm lag, and arm swing values for each.
Continuing tuning...
I'm also checking what happens when the hop gait exits during deceleration — since look_step_feet isn't running while the hop gait owns the feet, the foot position data goes stale, and falling back to the plant rule could cause an immediate stepping glitch. I'll want to reset the planted flag properly when handing control back.
Found a real defect: the crouch "ball" variant sinks the head 3 px through the floor. Fixing that plus the gait cycles.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import io p='t...00:13:36Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import io p='t...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import io p='v...00:13:36Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import io p='v...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive stop . > /dev/null 2...00:13:36Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive stop . > /dev/null 2...Thinking00:14:09
I'm weighing whether to re-capture only the affected clip variants or redo everything to be safe. The head clamp likely doesn't affect the breathing or walk bob sections, but I want to double-check that before deciding how much to re-run.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . --file tools/...00:15:34Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . --file tools/...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . "MOTION_SHEET...00:15:34Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . "MOTION_SHEET...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os, col...00:15:34Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os, col...Thinking00:16:54
The 1px worst case matches the round-3 baseline, and nothing exceeds it. Now I want to check the retuned hop/bound/ball/inchworm, and verify no limb stretches beyond full extension by measuring the max drawn extent from the feet point.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os from...00:17:05Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os from...
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\v2-gaits.png)
Thinking00:17:15
Looking at the gaits, walk 2 hop shows the body rising and falling with legs extending and lifting together, clearly a hop pattern. Walk 3 stride shows the far leg extending forward in a longer stride than the plant pattern, with the near leg trailing back.
For run 3 bound, the body is raised with legs together and extended, giving it a gallop-like quality distinct from lope. Next I'll look at crouch and rope.
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\v2-misc.png)
Thinking00:17:21
Looking at crouch 2, the head now sits above the floor line with the limbs tucked into a compact round silhouette, distinct from crouch 1's lower head and more splayed limbs — the head ducking between the shoulders gives it that ball-like read.
Crouch 3's lunge with one leg forward and the body raised is clearly distinct too. Now moving on to the rope.
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\v2-rope.png)
Thinking00:17:28
I check each rope pose now reads distinctly: rope 1 has alternating hands with low legs, rope 2 shows a clamped inchworm position clearly higher up, and rope 3 has the body swinging offset to the left. All three are visually distinguishable, so now I move on to checking the horizontal spacing.
After confirming no limb crosses the frame, I'll update the docs in main.lua's header and .claude/CLAUDE.md, clean up the check directory, stop the instance, and write the final report.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import collect...00:17:41Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import collect...Thinking00:17:51
Checking the max half-extent of 16px against the character's arm reach confirms it's within limits with no stretching needed, and the offset of 15 works fine. Now I need to update the documentation — main.lua's header comments for controls and the F2 description, plus the CLAUDE.md file.
I'll also clean up by deleting the check/ directory and the test image I created inside it before stopping the instance.
For CLAUDE.md, I need to update the controls section to mention F3 and the new keybindings, add a paragraph documenting the character round 4 pass, and make sure the tools and mechanical checks sections reference motion_sheet alongside pose_sheet.
All checks pass. Now the docs.
EditC:\Users\a327e\Desktop\a327ex\emojunky\main.lua00:17:54Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\main.luaEditC:\Users\a327e\Desktop\a327ex\emojunky\.claude\CLAUDE.md00:17:54Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\.claude\CLAUDE.mdEditC:\Users\a327e\Desktop\a327ex\emojunky\.claude\CLAUDE.md00:17:54Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\.claude\CLAUDE.mdEditC:\Users\a327e\Desktop\a327ex\emojunky\.claude\CLAUDE.md00:17:54Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\.claude\CLAUDE.mdThinking00:18:17
I should double-check that claim about instance reloading — it's only documented in tuning.lua's header, not the project CLAUDE.md, but it's consistent with existing behavior, so I can safely add it to the checks block.
Since `.claude/CLAUDE.md` is explicitly in scope per the brief, I'll go ahead and add the round 4 text right after the round 1 paragraph in "The passes" section.
EditC:\Users\a327e\Desktop\a327ex\emojunky\.claude\CLAUDE.md00:18:28Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\.claude\CLAUDE.mdBashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && rm -rf rounds/04-juice/check && a...00:18:28Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && rm -rf rounds/04-juice/check && a...Thinking00:18:45
The raw folder should be gitignored, so I want to confirm that with git check-ignore, then do a final pass verifying the HTML structure looks right and that pose_sheet still runs as expected before wrapping up.
I'll also grab a couple clean screenshots of the picker to double-check it renders correctly in both room 1 and room 4 with the current build.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && git check-ignore -v rounds/04-jui...00:18:45Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && git check-ignore -v rounds/04-jui...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && cat > /tmp/panel.lua <<'EOF' os.e...00:18:45Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && cat > /tmp/panel.lua <<'EOF' os.e...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && mkdir -p rounds/04-juice/panel &&...00:18:45Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && mkdir -p rounds/04-juice/panel &&...Thinking00:19:08
Good, the keys are confirmed: F2 steps a4 to a5, `=` toggles low/full, `]` advances the current action from stand to walk, and F3 turns the panel off. Now I want to check the screenshots to verify this.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' from PIL impor...00:19:11Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' from PIL impor...
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\p-room1.png)
Thinking00:19:21
The panel reads well overall: body, juice bar, and the eight actions with their variant labels, with `>walk` highlighted. One concern is the panel's width since the a4 note pushes it to the right edge and the bottom rows overlap the world, though it's still readable — also noticing `crouch` has a faint stray outline box, likely from the ui_content outline pass.
Checking that the widest line, "body a5 wide pill, stubby limbs" at 34 characters, stays right-anchored and doesn't overflow awkwardly. Moving on to room 4 now.
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\p-room4-f1.png)
Thinking00:19:27
In room 4 with F1 on, the panel sits below the dig HUD over the bright sky, and the outline keeps the text legible. The panel shows ">fall" because the human player object is still in that stage, which is expected, and I should double-check that room4-picker-hidden displays nothing.
There's also room1-f3-off to verify. I'll check the hidden case first.
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\p-room4-picker-hidden.png)
Thinking00:19:41
Good, hidden correctly in room 4 without F1. Now I want to verify pose_sheet still runs, but I realize running it would overwrite round 1's evidence by regenerating that page with the new look (juice enabled, preset defaulted) — I need to think carefully about whether that's acceptable before proceeding to clean up the panel directory and stop the instance.
Since rounds/01-poses is tracked in git and currently clean, I could safely run pose_sheet and then use git checkout to restore that directory afterward, verifying no errors occurred in the process. The remaining concern is that raw/ is gitignored, so running the tool would leave behind new round-4-style raw frames sitting in round 1's raw folder even after I restore the tracked files — I'd need to clean those up manually afterward to avoid contaminating that historical evidence.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "OUT_DIR\|look_targets\|l...00:19:43Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && grep -n "OUT_DIR\|look_targets\|l...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && mkdir -p rounds/04-juice/posechec...00:19:43Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && mkdir -p rounds/04-juice/posechec...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/pose_sheet.py rounds...00:19:43Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/pose_sheet.py rounds...Thinking00:20:19
Both scripts run fine, but I notice snapshot.lua overwrote the tracked snapshots in tools/snapshots/, which now carry the new look plus the picker panel — that's outside my scope, so I should restore them with git checkout after confirming the panel actually shows up in them.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python -c " from PIL import Image...00:20:21Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python -c " from PIL import Image...
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\snapcheck.png)
Thinking00:20:36
I've confirmed the panel appears in the snapshot picture set, so I'll restore the tracked snapshots to their original state and just report this as an out-of-scope item with a precise one-line fix. I also want to clean up rounds/04-juice by removing my scratch files (posecheck and panel), keeping only the deliverable contents: gifs, index.html, manifest.txt, and raw.
I keep going back and forth on whether the panel screenshots are worth keeping as evidence — they'd be cheap and helpful, but the brief specifically calls for three sections and nothing about screenshots. I'll settle on staying minimal and faithful to the brief: delete the panel directory and posecheck, since the page's intro already names the keys, and just report that I took panel screenshots for verification before discarding them.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && git checkout -- tools/snapshots/ ...00:20:37Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && git checkout -- tools/snapshots/ ...EditC:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.py00:20:37Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.pyEditC:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.py00:20:37Output not recorded
C:\Users\a327e\Desktop\a327ex\emojunky\tools\motion_sheet.pyBashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/motion_sheet.py roun...00:20:37Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python tools/motion_sheet.py roun...Thinking00:20:59
With 63 image cells total across the three sections and nothing missing, I should verify the page actually renders correctly in the browser before wrapping up my report to Fable.
Claude Browser: preview_start{"url": "file:///C:/Users/a327e/Desktop/a327ex/emojunky/rounds/04-juice/index.html"}00:21:03Output not recorded
{"url": "file:///C:/Users/a327e/Desktop/a327ex/emojunky/rounds/04-juice/index.html"}Claude Browser: computer{"action": "screenshot", "scale": 0.6}00:21:03Output not recorded
{"action": "screenshot", "scale": 0.6}Claude Browser: computer{"action": "screenshot", "scale": 0.55}00:21:03Output not recorded
{"action": "screenshot", "scale": 0.55}Thinking00:21:16
The pane's too small to see everything clearly, so I should widen the viewport to inspect the tables. Since the file is actually inside the project folder, it should render live rather than as a static snapshot, so the gifs loading via relative paths should work fine once I get a proper wide view and screenshot the sections.
Claude Browser: browser_batch{"actions": [{"name": "resize_window", "input": {"width": 1500, "height": 950}}, {"name": "computer", "input": {"acti...00:21:16Output not recorded
{"actions": [{"name": "resize_window", "input": {"width": 1500, "height": 950}}, {"name": "computer", "input": {"acti...Claude Browser: browser_batch{"actions": [{"name": "computer", "input": {"action": "screenshot", "scale": 0.55}}, {"name": "computer", "input": {"...00:21:16Output not recorded
{"actions": [{"name": "computer", "input": {"action": "screenshot", "scale": 0.55}}, {"name": "computer", "input": {"...Claude Browser: computer{"action": "screenshot", "scale": 0.55}00:21:16Output not recorded
{"action": "screenshot", "scale": 0.55}Thinking00:21:34
The viewport size still didn't change and I'm seeing a broken image icon where panel.png should render, since the page is loading from a data URL rather than a real file path, so relative image paths can't resolve. That means this preview can't actually validate the relative-path images since they'd all break the same way when opened as a real local file.
Rather than fighting the preview environment, I should just verify directly that every `src=` reference in index.html points to a file that actually exists on disk, then close out this check.
Claude Browser: tabs_close{"tabId": "tab-2"}00:21:34Output not recorded
{"tabId": "tab-2"}Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky/rounds/04-juice" && python - <<'PYEOF...00:21:34Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky/rounds/04-juice" && python - <<'PYEOF...Thinking00:21:50
All 64 references check out with no missing links and the reuse pattern across sections is correct. Now I just need to stop the agent instance, run a final anchor check, and confirm the verify count of 216 holds after the retune.
Since I only touched Python and doc comments after the last verify—no actual code changes—the previous 216-pass result should still be valid, but I'll re-run it once more anyway for a clean, safe confirmation before wrapping up.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive stop . 2>&1 | tail -...00:22:35Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive stop . 2>&1 | tail -...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive stop . 2>&1 | tail -...00:22:35Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive stop . 2>&1 | tail -...Thinking00:22:45
I'm worried I may have inadvertently converted CRLF line endings to LF when rewriting the files with Python since I read with universal newlines but wrote with newline='', which could make diffs noisy — I should check if the original files were CRLF and verify whether the large diffstat for view.lua reflects real additions or just line-ending churn.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && for f in view.lua tuning.lua tool...00:22:48Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && for f in view.lua tuning.lua tool...Thinking00:23:10
I'm puzzling over why the files still show CRLF on disk despite the write logic—realizing the issue is that reading with default newline translation converts CRLF to LF, but then the write mode with newline='' should preserve whatever was passed in, so I need to trace through exactly how the open calls handle newline translation on both ends.
Actually, the CRLF-on-disk vs LF-in-repo is just git's normal autocrlf behavior, not something I caused — the diff content itself is unaffected. That resolves my concern; the diffstat numbers reflect real content changes, and controller.lua correctly stays out of the modified list. Now I want one more solid confirmation that `off` truly reproduces round 3's motion, so I'm planning a pixel comparison between round 3's and round 4's gifs beyond the frame-by-frame check I already did on hang_climb.
Since both captures used matching presets, pinned blink seeds, and identical crops, I'd expect them to be pixel-identical across all actions — the head floor clamp is a no-op, juice amount is zero so springs collapse to snap behavior, and stepping stays the same since stride_k=1. I'm now checking whether there's any subtle difference lurking in how human-related logic behaves at these settings.
One last proof for the brief's key claim: is off pixel-identical to round 3?
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os from...00:23:15Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os from...Thinking00:23:30
Six of eight actions come out pixel-identical, but fall_land and slide_walljump diverge, so I'm digging into what's different about the landing sequence — possibly something in how the landing check now interacts with juice-off state.
For slide_walljump, I found the actual bug: the wall-jump kick applies a spring pull to the front and back legs unconditionally, without checking whether juice is on. That's clearly wrong — it needs to be gated on amt.
I also spot a similar pattern where the hang-swing pull fires ungated, but since it's only read downstream inside a gated function, it has no visible effect — though I should still gate it for cleanliness. Now I'm puzzled why fall_land specifically differs across 7 frames, since that action shouldn't involve any wall contact at all.
Checking other gated code — the cannonball splay is variant-gated, the head floor clamp only affects the spring's target not its output, and a new swing_amt assignment looks harmless. Nothing here explains the fall_land discrepancy, so I think I just need to diff those specific frames directly and see what's actually different.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os from...00:23:33Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os from...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' from PIL impor...00:23:33Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' from PIL impor...
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\regress.png)
Thinking00:24:13
I notice the two rows are subtly offset in position — in r4off the character sits a couple pixels lower and the ground band shifts slightly by frame 28. This looks like a camera or world-position difference rather than a drawing difference, meaning the whole scene shifted, which is odd since the camera and physics should be identical.
The crop is pinned to the feet, so a shifted character within it implies a sub-pixel screen position difference driven by the camera, yet verify passes identically and the controller is deterministic. I consider whether a random draw during breath initialization consumed an extra `math.random()` call, shifting the blink clock, but that shouldn't touch drawing since face_on is false. Then I reconsider — maybe it's not a position shift at all but a stretch effect from `look_juice_amt()` at a certain level, which could explain the leg/body looking longer or lower in r4.
Ruling that out, I check `floor_on` timing — moved earlier in the step order but computed with the same value on the same frame, so that's not the cause either. I turn to the wall jump: differences start at capture 42, but the wall jump itself happens around tick 46-66, mapping to captures 23-33, and the `wj_kick` spring_pull fires ungated at capture 23 with a decay window of about 9 captures — meaning its effect should show up at 23-32, not 42+, so that's likely not the cause either.
For fall_land, the discrepancy window (captures 21-27) sits right before the walk→stand landing transition around capture 28, so it's happening during the fall itself rather than at landing. I decide to diff a single frame precisely to check if it's a pure translation, and start considering the camera update logic as a possible deterministic source of the mismatch.
Looking at r3 versus r4off frame 20 more closely, the orange and green legs sit about one game-pixel lower in r4, and the shadow position differs too — this smells like a one-pixel vertical offset of the character sprite within its crop, meaning the rounded screen-y coordinate differs between runs.
If physics were truly identical the sy values should match exactly, so the fastest way to confirm this is to pull the actual sx/sy entries from both manifests and compare them frame-by-frame for the fall_land sequence.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' def load(path,...00:24:17Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' def load(path,...Thinking00:24:23
The feet positions and states are actually byte-identical, so the controller and camera are identical after all - my earlier reading of a 1px shift was wrong, likely a GIF palette or dithering artifact. So the real differences are in the drawing itself on specific frames, and I want to get the diff bounding box and magnitude to see exactly what moved by overlaying the diff.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' from PIL impor...00:24:25Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' from PIL impor...Thinking00:24:39
These tiny differing regions are all clustered below the feet line, in the floor/ground area rather than on the character itself — meaning the changes are happening in the ground texture, roughly 7-9 game pixels beneath where the feet sit.
That location makes me think of the drop shadow rather than the character sprite, since the shadow is offset down-right from the feet. But if the character's silhouette is identical (which the bbox suggests, since it starts below the feet), the shadow should also be unchanged unless something else is drawing there — maybe a pit floor edge, a tile boundary, or possibly the "last landing" text, though that's usually drawn above the character rather than below. I think the best way to resolve this is to just render magnified crops of that exact region for both frames and visually compare them.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' from PIL impor...00:24:44Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' from PIL impor...
Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\regionzoom.png)
Thinking00:25:29
The yellow blob is actually the mouse cursor emoji rendered in screen space on the cursor layer - it just happened to be off-frame in round 3 but visible in round 4, since the OS mouse position is wherever it defaults to in a hidden agent window.
Since the crop windows match exactly between runs (feet positions identical), the only real difference is that stray cursor artifact, not the character itself. This confirms `off` reproduces round 3's character drawing exactly, and I can report 6/8 clips pixel-identical with the remaining 2 differing only by that mouse cursor capture artifact.
Now I want to double check one loose end before wrapping up: whether `wj_kick` firing while juice is off represents an actual deviation from round 3, since the slide_walljump diff turned out to just be the cursor issue rather than a real gameplay difference.
The wall jump occurs at tick 46, which corresponds to capture 23, but the leg spring displacement should decay over roughly six captures and be visible during that window since the jump state uses a different pose than plant. Yet the comparison shows no difference at captures 23-30, which is confusing since a 3.2px kick on the leg target shouldn't be invisible.
I'm checking whether `force_t` actually fires correctly — since `look_sense` runs before `player_update` each tick, the edge detection on force_t transitioning from zero should still catch the wall jump event on the following tick. So logically it should trigger, which makes the missing pixel difference at captures 23-30 even stranger — I need to look at the full list of differing captures for slide_walljump again to pin down exactly where things diverge.
Now I'm reconsidering the spring_pull call that shifts the leg target x by -3.2 pixels — that should be a visible foot movement, so its absence in the capture is suspicious. I'm mapping capture indices to actual ticks to confirm the wall jump input should be visible starting around capture 24, and noticing the differing frame ranges (42-59, or 21-27 in another case) might instead be explained by the cursor moving in and out of the crop window rather than by the animation logic itself.
To settle this, I want to directly gate the pulls and re-capture just the "off" column to verify it still matches round 3 — but since gating also affects the "low" and "full" scaling columns for the kick, I'd likely need to re-capture everything to keep the page consistent.
That's about 25 minutes of work, so I want to check first whether the gate actually matters. Both `wj_kick` and `hang_swing` are juice items per the brief and should scale with the master and disappear at `off`, but I notice `hang_swing` was pulled ungated and only read inside a juice-check condition.
`wj_kick` is pulled ungated but applied directly to the spring, so at `off` it still affects the drawing — that's a real bug, unlike `wj_spin` which is properly gated. I should confirm this by actually measuring whether the pull has a visible effect before committing to the fix and re-capture.
Since any code change means the page must be re-captured regardless, I'll go ahead and fix it. Scanning the rest of look_sense, the stride/lift/arm resets and variant-read values are all fine since variants are meant to work with juice off, but I'll gate the hang swing pull too for symmetry so no spring carries unused energy, along with fixing wj_kick.
One real bug: the wall-jump kick fires even at juice off. Fixing and re-capturing.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import io p='v...00:25:43Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import io p='v...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive start . 2>&1 | tail ...00:25:43Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive start . 2>&1 | tail ...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . "MOTION_SHEET...00:25:43Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor drive eval . "MOTION_SHEET...Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os, col...00:25:43Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' import os, col...Thinking00:28:55
The two clips only differ in that narrow band 3-10 game pixels below the feet line, which matches the mouse-cursor region — the character sprite itself stays pixel-identical across all eight clips. I want to confirm this by masking out the cursor colors specifically to verify the difference is entirely attributable to it.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' from PIL impor...00:29:02Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && python - <<'PYEOF' from PIL impor...Thinking00:29:11
This confirms it: every differing pixel is just background or rock color being swapped for the black-and-gold cursor emoji overlay, with zero differences touching any actual body color. So `off` reproduces round 3's character drawing exactly across all eight acts.
Now for final housekeeping: I need to confirm zero anchor errors, verify 216 still holds, check git status is clean aside from intended files, delete the scratch lua files from /tmp, and confirm the page rebuilt with panel.png. Since the brief doesn't specify a report path, I'll just return the report as my final message rather than writing a file, especially since the project's CLAUDE.md says not to write report markdown files. Let me run these final checks now.
Bashcd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor check . 2>&1 | tail -1 && ...00:29:17Output not recorded
cd "C:/Users/a327e/Desktop/a327ex/emojunky" && anchor check . 2>&1 | tail -1 && ...Bashrm -f /tmp/probe.lua /tmp/panel.lua && cd "C:/Users/a327e/Desktop/a327ex/emojunk...00:29:17Output not recorded
rm -f /tmp/probe.lua /tmp/panel.lua && cd "C:/Users/a327e/Desktop/a327ex/emojunk...Thinking00:29:34
I have everything I need now, so I'm putting together the report: what changed, the juice items with their knob names and defaults, a table of the five presets' numbers, the variant list per action, the picker's keys, verification details on what I checked, and notes on what was left unfinished or noticed but not addressed.
For the "what changed" section, I'm walking through the functions modified or added in view.lua — the preset cycling, the new juice and variant tables and cycling functions, the sensing and pose functions, the spring parameters, and the draw/debug updates.
Beyond that, I need to note the changes across boot.lua, main.lua, tuning.lua, the motion sheet tools, and the CLAUDE.md documentation — new key bindings, presets, axes, and warnings. I should get exact absolute file paths before writing this all up as a thorough report following the project's communication style.
Done. Report follows.
emojunky character round 4 — report
Everything below is in C:/Users/a327e/Desktop/a327ex/emojunky/. controller.lua was not touched; the look reads it and never writes to it.
1. What changed
view.lua (the look section only; +~930 lines)
| function | what |
|---|---|
look_cycle_preset(d) | changed — walks T.look.preset_cycle in either direction instead of the hardcoded a→b→c |
LOOK_ACTION_OF / LOOK_ACTION_ORDER | new — controller state → action key; the panel's row order |
look_juice_amt() | new — the master as a multiplier (0 / 0.5 / 1) |
look_cycle_juice(d) | new — - / = step T.look.juice.order |
look_action_key(p), look_variant_of(act), look_cycle_variant(d) | new — which action is live, which style it is in, and [ / ] |
look_tset(R,i,x,y), look_pose_four(R,P,V) | new — variant helpers for writing limb targets |
look_probe_ledge(p,V) | new — read-only corner probe written the way ledge_grab_at tests a corner (solid tile with nothing above it); it asks tile_solid about the columns ahead and touches nothing on p |
look_gait_hop(p,R,P,L,V) | new — the airborne gait shared by walk 2 and run 3; phase from distance travelled, V.lag delays the back foot |
LOOK_VARIANTS | new — 8 actions × 3 styles, each hanging up to body / limbs / gait |
look_targets(p, dt) | rewritten — keeps the lean as an ANGLE so the variant and juice passes can both add to it before the head is placed; stores the limb roots and the grab world points on R; owns the gait (it has to land before the floor clamp); clamps the head to -head_r under a floor pose |
look_step_feet(p,dt) | changed — honours lk.stride_k / lk.lift_k, records lk.swing_amt |
look_sense(p,dt) | new — velocity/acceleration low-pass, state timer, the hang-catch and wall-jump edges, the gait and breath clocks; resets the frame's variant scales |
look_juice_lean / look_juice_body / look_juice_limbs / look_arm_swing | new — the four juice passes, in that order |
look_flip_carry(p) | new — a facing flip mirrors every x spring in place instead of snapping |
look_spring_params(p,amt) | new — lerps the four spring groups between round 3's two settings and juice's four |
human_look_init | changed — adds the swing spring and the juice layer's state |
human_look_update | changed — look_sense first, flip-carry instead of snap, look_spring_params before the targets |
human_look_jump / human_look_land | changed — juice impulses via spring_pull on the pose springs; the cannonball splay (variant, not juice) |
draw_human | changed — the stretch along the motion multiplies into the existing squash push |
draw_debug | changed — a juice/variant line, and the help strip names the new keys |
draw_look_picker() | new — the panel |
tuning.lua — preset = 'a'; preset_cycle + preset_note; four new chibi presets; T.look.juice (the master, the four spring groups, every magnitude); T.look.variants; T.look.vtune (the per-variant numbers). boot.lua — look_picker_on = true; binds f3, minus, equals, leftbracket, rightbracket. main.lua — five input_pressed handlers next to F1/F2; draw_look_picker() in draw(); header controls block. tools/motion_sheet.lua — four capture axes (MOTION_SHEET_JUICE, MOTION_SHEET_VARIANTS, plus MOTION_SHEET_APPEND), vkey per action, forces every other action to style 1 while a clip is taken, hides the panel for the run. tools/motion_sheet.py — nine-column manifest (still parses round 3's seven), one GIF per (preset, juice, variant, action), three sections worked out from the axes present, clips shared between sections. .claude/CLAUDE.md — the round-4 paragraph, the controls, the tools list, and a warning that an agent instance does not pick up a file saved after it started (this cost me one whole capture pass).
2. The juice items
All under T.look.juice, all multiplied by the master (off 0 / low 0.5 / full 1).
- Torso lean —
lean_v 0.018rad per tile/s of forward speed,lean_a 0.0028per tile/s²,lean_air 0.030extra per tile/s while airborne,wj_spin 0.22rad away from the wall after a wall jump, whole term capped atlean_max 0.40. - Head looks into the acceleration —
head_lean 0.022px per tile/s², caphead_lean_max 2.8px. The lag and overshoot are not a term: they are the softer head spring. - Softer springs —
hip 6.0/0.30,head 4.6/0.42,arm 4.2/0.46,leg 8.0/0.10, lerped from round 3'sbody 7/0.25andlimb 8/0.10by the master. This lerp is whyoffis a reproduction and not an approximation. - Arm follow-through —
arm_drag 0.034px per tile/s² opposite the acceleration, caparm_drag_max 3.6px. Exempt in every grab state: a hand dragged off a real world point is a hand that has let go. - Walk/run arm swing —
arm_swing 0.26× arm_len at a full stride, opposite the legs, driven by where the gait actually left the feet. - Walk bob —
walk_bob 1.15px at the top of a swing (added during the round: without it the head did not bob at a constant walk speed, because nothing else moves it vertically). - Stretch along the motion —
stretch_v 0.0060per tile/s, capstretch_max 0.15; dominant axis wins, opposite axis takes 60% back. About 6% at run speed, 11% at terminal fall. - Idle breathing —
breathe_amp 0.55px at the hip,breathe_head 1.8×at the head,breathe_arm 0.7×at the hands,breathe_rate 0.40Hz; only in held poses (stand, hang, still crouch). - Turnaround —
flip_carry 1.0; the springs are mirrored in place, so the head and arms carry through the flip. Teleports and resets still snap. - Acceleration low-pass —
accel_tau 0.10s,accel_clamp 80tiles/s² (a landing zeroes vy in one tick; raw d(v)/dt at 120 Hz is a spike train). - Landing —
land_hip 2.8px at a lethal-tier impact,land_head 1.8×,land_arm 3.4px, all scaled by the same √(h/lethal) the squash uses. - Jump launch —
jump_head 2.2px,jump_arm 2.6px of trail. - Wall jump —
wj_kick 3.2px the wall-side leg extends,wj_life 0.30s. - Hang —
hang_swing 0.34rad pulled on the catch (scaled by fall speed) on a1.7 Hz / 0.82spring,hang_leg 0.75×the swing for the dangle lag,hang_look 0.30× head_r toward the corner. - Mantle —
climb_lead 0.55× torso of head-first lead over the first 0.26 s. - Wall slide —
slide_drag 0.34× arm_len the free arm drags up,slide_tilt 0.28× head_r away from the face. - Rope —
rope_sway 1.9px at the hip,rope_tilt 0.22× head_r toward the reaching hand. - Crouch —
crouch_arm 0.16× arm_len forward and low; crouch walkwaddle 1.7px everywaddle_cycle 7.0px of travel.
3. The five presets
Every number is px. stand / crouch are what tuning_derive solves; hang clear is arm_len×0.95 − sh_off − head_r, how far the skull sits below the ledge in a hang (negative = the head pokes over the corner it holds).
| head_r | torso | torso_w | arm (u+l) | leg (u+l) | limb_w | hand/foot_r | sh_w | hip_w | stride | lift | stand | crouch | hang clear | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
a chibi baseline | 6.0 | 6.0 | 3.2 | 8.4 | 9.0 | 1.6 | 1.8 | 4.8 | 1.9 | 5.0 | 2.4 | 20.3 | 12.0 | −0.54 |
a2 big head, short torso | 6.8 | 4.2 | 3.0 | 8.0 | 10.5 | 1.5 | 1.7 | 4.5 | 1.8 | 5.6 | 2.6 | 20.7 | 11.9 | −0.96 |
a3 long legs, short arms | 5.6 | 5.6 | 3.0 | 6.6 | 11.6 | 1.5 | 1.7 | 4.5 | 1.9 | 6.6 | 3.0 | 21.9 | 11.9 | −1.68 |
a4 small head, long arms | 5.2 | 6.4 | 3.0 | 9.6 | 9.2 | 1.5 | 1.7 | 4.5 | 1.8 | 5.2 | 2.5 | 20.1 | 11.5 | +1.58 |
a5 wide pill, stubby limbs | 6.0 | 6.0 | 4.2 | 6.4 | 8.8 | 1.9 | 2.0 | 6.1 | 2.4 | 4.4 | 2.1 | 20.1 | 12.0 | −2.44 |
a is untouched. b and c stay in the table (the pose sheet and the round-1/3 pages still name them) but drop out of the F2 cycle. a4 is the only build whose arm is longer than head_r + sh_off, which is the whole reason the hands go over the head in a hang — the sheet's hang row is where you can see that and it is the sharpest difference between the five.
4. The variants
Style 1 is round 3 in every row. Variants are not scaled by the juice master — they are their own axis, so juice off + walk 2 is the hop with round-3 secondary motion.
- walk — 1
plant(round 3's stepping rule) · 2hop: both feet leave the ground together every 34 px of travel (≈4 hops/s), the hip rides the lift · 3stride: 2.4× the stride, 1.4× the lift, the hip dips 2.6 px while a foot swings - run — 1
lope(the walk gait at run speed) · 2sprint: +0.26 rad of lean, arms pumping at 0.62 × arm_len, a slightly longer stride · 3bound: a gallop on the same hop machinery, 52 px per cycle, feet landing 0.7 px apart with the back one a fifth of a cycle late - jump — 1
reach· 2diver: both arms swept back, legs trailing, −0.24 lean · 3tuck: knees up at 0.30 leg_len, arms forward, hip raised - fall — 1
spread· 2flail: arms 0.8 arm_len above the shoulders cycling at 3.6 Hz, legs running in the air · 3cannonball: tucked in the air, and a 4.5 px four-limb splay pulled on the landing (that pull is the variant's, so it fires at any juice level) - hang — 1
still· 2reach: while airborne, iflook_probe_ledgefinds a corner within 1.6 tiles ahead the near hand stretches at it (clamped to 0.85 arm_len) · 3wallwalk: during a hang and a mantle the legs alternate up the wall face instead of tucking - slide — 1
side· 2facing: both hands and both feet on the wall, chest into it · 3backed: the torso tips away from the wall, arms spread - rope — 1
hands· 2inchworm: legs clamp and pump ±0.34 leg_len while the hands stay nearly together high, and the hip inches up and down 0.32 leg_len · 3swing: arms fixed high, the body sways 4.2 px side to side off the rope - crouch — 1
crouch· 2ball: the hip rides up under a short steep torso and the head ducks to 62% of it, hands and feet pulled in tight · 3lunge: hip forward and up, one leg extended 0.86 leg_len ahead
One ergonomic wrinkle worth knowing: hang style 2 is the only style that shows while the character is in another action (a reach only means anything on the way to a corner), so it is applied from jump and fall whatever their own style is — but [ / ] only reach the hang row while actually hanging. Setting it from a hang and then jumping is the way to see it.
5. The picker's keys
F3 show/hide · F2 proportion · - / = juice down/up · [ / ] the variant of the action the character is in right now. All four confirmed free in boot.lua and exercised through the real input pump (F2 stepped a4→a5, = stepped low→full, ] stepped the live action walk 1→2, F3 hid the panel).
The panel is top-right — F1's readout is top-left and the hearts are top-left, so the two never collide. Bare text on ui_content, no background rectangle: the F1 readout is bare text on the same layer in the same font, and two treatments for two readouts one key apart would read as an accident. On in rooms 1–3, hidden in room 4 unless F1 is on (screenshot in the page header, rounds/04-juice/panel.png).
6. Verification
anchor check .— 0 errors, 58 warnings, all 58 inemoji/(the documented knightvspawns baseline); none in the game's own files.anchor drive eval . --file tools/verify.lua— 216 passed, 0 failed, run on a fresh instance against the final code.tools/pose_sheet.lua+.pyandtools/snapshot.luaboth still run (checked into a scratch dir; the trackedtools/snapshots/was restored withgit checkout).- The page:
rounds/04-juice/index.html, 52 clips → 63 cells across three sections, 0 missing cells, all 64srcreferences resolve. Captured in three passes; theraw/frames are gitignored.
off is round 3, proved pixel by pixel. I diffed all eight of round 4's a-off-v1-* GIFs against round 3's a-* GIFs frame by frame. Six are byte-identical. The two that differ (fall_land 7 frames, slide_walljump 18) differ only below the feet line, and every differing pixel is background rock or page-black turning into black-or-gold — the emoji mouse cursor, which sits at a different screen position in my capture session than in round 3's. Zero differing pixels involve a body colour.
Frames I actually looked at (zoomed 8×, feet-pinned): walk off vs low vs full; fall_land off vs full (the head dip and the arm swing-down on the landing are clear at the impact frame); hang_climb off vs full; all five presets standing, jumping and hanging (three frames each); walk 1/2/3 and run 1/2/3 across a gait cycle; jump 1/2/3 and fall 1/2/3; hang 1/2/3; slide 1/2/3; rope 1/2/3; crouch 1/2/3; and the four panel screenshots.
Floor and extent scans (programmatic, every one of the 3120 captured frames):
- Worst body pixel below the feet line in a grounded pose: 1 px, and it is present identically at juice
off— it is round 3's foot circle putting its last row on the floor line. No preset, no variant and no juice level exceeds it. - Widest half-extent from the feet point: 16 px (fall_land at full, the landing follow-through) against 15 px for
off. The arm's geometric reach is ~15 px, so nothing is stretching.
Three defects found and fixed during the round:
- The crouch
ballvariant buried the head 3 px through the floor — the crouch pose already rests the skull at exactlyhead_r, so there is no room to duck lower. Fixed twice over: the ball now ducks from the other end (hip up under a short steep torso), andlook_targetsclamps the head to-head_runder a floor pose, which is provably a no-op on every round-3 pose (crouch and dead both sit at exactly-head_r). - The hop and bound cycles were 9 px and 15 px of travel, which at 5.5 and 10 tiles/s is ~15 cycles a second — a vibration, not a hop. Raised to 34 px and 52 px.
- The wall-jump kick was pulled onto the leg spring ungated by the master, so it would have fired at juice
off. Gated, along with the hang-swing pull, and everything re-captured afterwards.
7. Stopped on / shipped partially
Nothing stopped, nothing shipped partially. All five sections of the brief are in: juice, the picker, the proportion variants, the motion variants, and the page. No juice item needed a controller.lua change; the two events without a callback (the hang catch, the wall jump) are read off p.state and p.force_t as rising edges.
8. Noticed, left alone
- The panel leaks into
tools/snapshot.lua's picture set.look_picker_ondefaults to true and rooms 1–3 show the panel, so all 15 tracked pictures now carry it. I hid it insidetools/motion_sheet.lua(that file is in scope and the evidence page must show the character, not the UI) and verified no round-4 crop window can reach the panel region, buttools/snapshot.luaandtools/pose_sheet.luaare named in the brief as constraints, not as editable, so I left them. The fix is two lines in each:local picker_was = look_picker_on; look_picker_on = falsebefore the run, restore after. I re-took the snapshot set to confirm the leak and thengit checkout-ed it back, so the tracked pictures are unchanged. - The wall-slide budget bar reads as a black box with a blue bar in the captures. It is on
game_layer, which is outlined, so it gets a 2 px black rim around a 3 px bar. Pre-existing — round 3'sa-hang_climbGIF has the identical artifact at the identical frames. tools/pose_sheet.luastill hardcodesPRESETS = {'a','b','c'}, so it captures two bodies that are no longer in the F2 cycle and none of the four new ones. It runs fine; it just no longer covers the set the round is about.- The walk's base gait is about thirteen steps a second at walk speed (
stride 5.0px against 132 px/s).tuning.luaalready acknowledges this in a comment. It is why the hop variant needed a cycle almost seven times the stride to read as a hop at all, and it is probably worth a look on its own terms — round 3's legs are closer to a shuffle than a walk. - An agent instance does not hot-reload files saved after it started. I lost a full capture pass to this before noticing; the warning is now in
.claude/CLAUDE.mdnext to the mechanical checks.