emojunky: infrastructure batch (emoji toolkit, 640x360, layer stack)

Delegated run·Sep 13, 2026  21:55·Prompted by Fable·Run by Opus 5Opus 5 xhigh
Ctrl + F
Show

Transcript

Fable·21:54:56·Sep 13, 2026Prompter

Read and implement the brief at C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\emojunky-infrastructure.md in full. The project is C:/Users/a327e/Desktop/a327ex/emojunky/. Use Git Bash syntax for shell commands (the anchor command is on PATH there). Your final message is the report, in the format the brief gives.

packet: brief.md21:54:56
Output
# emojunky — infrastructure batch (emoji toolkit in, family window, layer stack)

You are implementing under an agreed brief written by Fable (Claude), who is
directing this work for the owner. The brief closes the high-level decisions;
the details are yours to decide, and you list the ones you made in the report.
Where the brief is silent on something that would change the approach, where it
turns out to be wrong, or where a step would reach outside the scope below --
other people's servers, rate limits, large downloads, disk, network, money,
anything the brief did not put in your hands -- stop and report instead of
choosing. Read `C:/Users/a327e/Desktop/a327ex/emojunky/.claude/CLAUDE.md` for
project facts (paths, docs, commands, gotchas); its process rules about briefs
and asking the owner bind Fable, not you. Do not commit, push, run the game
interactively (never `run.bat`), or touch files outside the scope. End with the
report in the format given.

## Task

`emojunky/` is the Reverse Minesweeper game (an Anchor 3 tile-digging
platformer, currently drawn as flat rectangles) being ported, in passes, to the
owner's Twemoji "emoji art style" as used by ToTeMoJi, WINDRANG
(`ABAgames/windrang/`) and Horse Game (`ABAgames/knightvspawns/`). This batch is
the infrastructure only: bring the `emoji/` toolkit and its boot assets into the
project, move the window to the family's 640x360, route all drawing through the
toolkit's layer stack, and document the project. The game must keep looking
essentially as it does now (rectangles; the visual passes come later) and its
216-assert verify suite must stay green.

## Approach

Read first: `Anchor/engine/docs/SURFACE.md` (how a game is driven), then the
project's `main.lua` header (file map + controls), `boot.lua`, `view.lua`,
`tools/snapshot.lua`, `tools/verify.lua`. Then `ABAgames/windrang/main.lua`
lines 1-110 (the family's boot block and layer stack) and
`ABAgames/knightvspawns/emoji/init.lua` (what the toolkit loads at boot).

1. **The `emoji/` package.** Copy `ABAgames/knightvspawns/emoji/` wholesale into
   `emojunky/emoji/` (it is the newest copy and the only one proven on the
   current framework; WINDRANG's is older and sits on a stale framework). Then
   audit it for coupling to Horse Game: grep the package for globals it reads
   that only knightvspawns' own game files define, and for hard-coded paths.
   `GAME_HOSTED` stays as it is (nil here, so the dev overlays load). Small,
   obvious decouplings (a nil guard, a default) are yours; anything that needs
   a real stub of game logic is a stop condition.
2. **Assets.** Every file the package loads at boot must exist in
   `emojunky/assets/`, copied from `ABAgames/knightvspawns/assets/` (fall back
   to `ABAgames/windrang/assets/` for anything missing there): the starter
   images (`slight_smile`, `no_mouth`, `no_mouth_hit`, `star`, `dash`, `cloud`,
   `backhand_index_pointing_up`, `x_mark`), the glyph set (`0`-`9`, `a`-`z`,
   `plus`, `minus`), the plant sprites (`seedling`, `sheaf`, `blossom`, `tulip`,
   `four_leaf_clover`), `hit1.png`, the three fonts (`LanaPixel.ttf`,
   `FatPixelFont.ttf`, `Awesome 9.ttf`), and every shader the package
   references (`draw_shader.frag`, `outline.frag`, `outline_only.frag`,
   `shadow.frag`, `recolor.frag`, `grayscale.frag`; check the package for
   others). Also copy `dizzy.png` (the player's hurt face in ToTeMoJi/WINDRANG;
   the next pass needs it). Keep `monogram.ttf`. Do NOT copy any sound bank:
   the owner picks sounds himself, later. The sound modules must boot with no
   sounds declared; if `sounds.lua`, `sound_tuner.lua` or `sound_picker.lua`
   need a directory to exist, create an empty `assets/sounds/` (with a
   `.gitkeep`); if `sound_picker.lua` needs a pack library path or any file
   outside the project, do not point it anywhere -- stop and report what it
   expects.
3. **Window.** In `main.lua`: `width = 640, height = 360, scale = 2, filter =
   'rough'`, title `emojunky`. `TILE_PX` stays 24 (so about 26.7 x 15 tiles are
   visible instead of 20 x 15). Find everything that assumed the old 480x360 /
   20x15 view: camera construction and clamps in `boot.lua` / `controller.lua`,
   the reach rectangle, HUD placement (top bar, bottom help text, banners),
   the power-down camera pan, room sizes in `rooms.lua`. The MECHANICS must not
   change (the tile world, the controller, the robot, the reach in tiles); only
   pixel placement follows the new size. A test room narrower than the view
   may show void beyond its walls if the camera has no clamp today; that is
   acceptable, report it.
4. **Layer stack.** Replace the lab's two layers (`game_layer`, `ui_layer` in
   `boot.lua`) with the family's `emoji_layers({...})` declaration in WINDRANG's
   order and with the same names and outline/shadow flags (`bg`, `bg_plants`,
   `game`, `cover`, `effects`, `overlay`, `ui_panel`, `ui_content`,
   `ui_top_panel`, `ui_top_content`), and end the frame with `emoji_render()`
   instead of the lab's `layer_draw` calls. Then re-route every draw in
   `view.lua` (and anywhere else that names a layer, including
   `tools/snapshot.lua`) to the new layers: the world (tiles, bedrock, sky,
   depth lines, the reach rectangle, dig progress, cursor highlight) -> `bg`
   (no outline, no shadow: the tile look is a later pass and must not get a
   silhouette outline now); the actors (human, robot, ropes, hitboxes, hearts
   attached to actors, nuggets) -> `game` (outline + shadow: the actors get
   the family's silhouette immediately, as a preview); blasts, sparks, rings,
   pops, floating text -> `effects`; HUD, banners, the help text, the debug
   readout -> `ui_content` (fixed to the screen, not the camera). Work out from
   `emoji/pipeline.lua` and WINDRANG how a layer is bound to the camera (world
   layers scroll with the lab's `cam`; UI layers do not) and apply the same
   binding. If the pipeline cannot give the world layers the camera and the UI
   layers none the way the lab needs, stop and report.
5. **Fonts and palette.** `require('emoji')` registers `main`/`big`/`mid` and
   runs `palette_init()` + `effect_setup()`. Keep the lab's `debug`/`hud`
   monogram fonts registered and IN USE: nothing changes font in this batch.
   The lab's color constants in `view.lua` stay. Report what the pipeline
   clears the page to and whether the lab's own background rectangles still
   cover it.
6. **Cursor.** Leave `emoji/cursor.lua`'s pointing-hand cursor ON if it
   installs itself on require (it is the family's OS-cursor replacement and the
   dig game is mouse-driven); report whether it is active and the one-line way
   to turn it off.
7. **Snapshot tool.** `tools/snapshot.lua` must capture what the pipeline
   renders (call whatever draws the stack before `engine_snapshot`, as the
   lab called `layer_draw`). Re-take the existing snapshot set into
   `tools/snapshots/` (same file names) so Fable can compare old and new.
8. **Docs.** Rewrite `emojunky/.claude/CLAUDE.md` from the scaffold stub into
   the project's own: what the game is (one paragraph: the two-stage loop,
   robot digs on a countdown, human descends with ropes to camp), the file map
   (from `main.lua`'s header, updated), the controls, the rooms (1-3 controller
   test rooms, 4 the game), the `emoji/` package's origin (copied from
   knightvspawns on 2026-09-13; port toolkit changes per file, never overwrite
   wholesale), the asset convention (Twemoji 512x512 PNG per emoji in
   `assets/`, fetched with the `/download-emoji` skill), fonts, the layer stack
   and what goes where, the verify command (216 asserts) and the snapshot tool,
   the process rules the scaffold stub already carries (never `run.bat`; drive
   it as an agent instance; `anchor check` before handover), and the plan of
   passes (infrastructure -> the player's look and hop movement -> tiles ->
   the rest, each feel-judged by the owner). Update `README.md` (one paragraph
   + how to run/drive it) and `main.lua`'s header comment to name emojunky and
   the new layer stack.

## Interfaces

- `emoji/init.lua` is required right after `require('anchor')({...})` in
  `main.lua` (see WINDRANG); it must run before `boot.lua` declares layers,
  so check the boot order the init table gives (`boot = {'boot.lua'}`) and
  place the require where WINDRANG places it.
- `view.lua` is the only file with draw calls; `game.lua`, `robot.lua`,
  `controller.lua`, `world.lua`, `rooms.lua` hold mechanics and must not change
  except for pixel/camera placement that the window size forces.
- `tools/verify.lua` runs unchanged through `anchor drive eval`. If an assert
  encodes a window-derived expectation (a camera pixel position, a HUD
  coordinate), adjust that expectation only, and list each one in the report.

## Decisions closed by this brief

Package source (knightvspawns), window (640x360 scale 2), tile size (24 px),
layer names/order/flags (WINDRANG's), what goes on which layer (above), no
sounds, no font switch, cursor on, monogram kept. Yours: how the camera binds
to layers, how `snapshot.lua` renders, every decoupling detail, doc wording.

## Scope

May touch: everything under `emojunky/` except `emojunky/anchor/` (the
framework copy: read-only) and the assertion targets of `tools/verify.lua`
beyond window-derived expectations. Read-only: `ABAgames/knightvspawns/`,
`ABAgames/windrang/`, `Anchor/engine/docs/`, `reverse-minesweeper-fable/`.
Nothing else on disk. No commits, no pushes, no network.

## Stop conditions

- The package reads a Horse Game global or file that cannot be nil-guarded or
  defaulted in one obvious line.
- `sound_picker.lua` (or any module) needs a path outside the project.
- The pipeline cannot bind the camera per layer the way item 4 needs.
- The verify suite fails for a mechanics reason (not a window-derived pixel
  expectation).
- Anything that would need an engine (C) or framework (`anchor/`) change.
- A boot error in the toolkit you cannot trace to a missing asset or a
  decoupling within scope.

## Verification

From `C:/Users/a327e/Desktop/a327ex/emojunky/` (Git Bash):

    anchor check .                                   # 0 errors
    anchor drive start .
    anchor drive eval . --file tools/verify.lua      # 216 PASS, 0 FAIL, no Lua errors
    anchor drive eval . --file tools/snapshot.lua    # or however the tool is driven; see its header
    anchor drive stop .
    git status --short && git diff --stat

Check the drive instance's boot output for Lua errors and missing-asset
warnings. Look at the new snapshots yourself (the Read tool shows PNGs): the
rooms must show the same scene as the old ones, wider, with actors outlined
and shadowed and the world plain.

## Report format

1. What changed: file, function or block, one line each (the asset list may
   be one line naming the count and origin).
2. Decisions you made on your own.
3. What was verified and how (paste the PASS/FAIL counts and `git diff
   --stat`).
4. Anything you stopped on.
5. Anything you noticed but left alone (coupling in the package, dead code,
   window-size assumptions you were unsure about).
Nothing else.
Opus 5xhigh·21:54:58·Sep 13, 2026Worked for 26m 43s

I'll start by reading the brief in full.

ReadC:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\emojunky-infrastructure.md21:55:00Output not recorded
Input
C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\emojunky-infrastructure.md
Thinking21:55:05

I should start by reading through the project's key files to get oriented—CLAUDE.md, SURFACE.md, main.lua, boot.lua, view.lua, the snapshot and verify tools, and the relevant windrang and knightvspawns modules. I'll use Bash with cat to pull these in efficiently.

Bashls -la /c/Users/a327e/Desktop/a327ex/emojunky/ && echo "--- .claude ---" && cat ...21:55:05Output not recorded
Input
ls -la /c/Users/a327e/Desktop/a327ex/emojunky/ && echo "--- .claude ---" && cat ...
Bashcat /c/Users/a327e/Desktop/a327ex/Anchor/engine/docs/SURFACE.md21:55:05Output not recorded
Input
cat /c/Users/a327e/Desktop/a327ex/Anchor/engine/docs/SURFACE.md
Thinking21:55:09

I should also check main.lua, boot.lua, and the tools to get a fuller picture.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && echo "=== main.lua ===" && cat -n m...21:55:11Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && echo "=== main.lua ===" && cat -n m...
Thinking21:55:15

I still need to check view.lua, tools/snapshot.lua, the windrang main.lua header, and the knightvspawns emoji init file, so I'll start with snapshot.lua, the windrang header, and the emoji init.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && cat -n tools/snapshot.lua21:55:15Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && cat -n tools/snapshot.lua
Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/windrang && sed -n '1,130p' main.lua |...21:55:15Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/windrang && sed -n '1,130p' main.lua |...
Thinking21:55:21

Now I'm moving on to the knightvspawns emoji package.

Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns && ls -la emoji/ && ls -...21:55:22Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns && ls -la emoji/ && ls -...
Thinking21:55:29

Good, the pipeline doesn't handle camera binding itself, so the lab's existing camera_attach pattern still works fine around world draws while ui_content_layer stays unattached. Now I want to check knightvspawns' emoji package for Horse-Game coupling, so I'll grep for globals and look through each file.

I'll start with sounds.lua, sound_picker.lua, sound_tuner.lua, sound_tuning.lua, volume_tuning.lua, cursor.lua, transition.lua, fx.lua, plants.lua, and ui/init.lua, doing a broad grep for asset paths and suspicious globals first.

Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && echo "=== asset...21:55:30Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && echo "=== asset...
Thinking21:55:47

I notice sound_picker.lua wants a path outside the project, `~/Desktop/sound packs`, which matches the stop condition from the brief about not pointing to external files. But I don't think that means aborting everything — I should check whether sound_picker.lua actually fails at boot without it before deciding how to handle this one piece.

Best path forward: leave the module's default path untouched, check whether it only reads that path lazily when the overlay opens rather than at boot, and if so proceed with the rest of the batch while flagging this prominently as something unresolved in the report. If it actually errors at startup, that's a genuine stop condition. Let me open sound_picker.lua to check.

Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && sed -n '1,120p'...21:55:47Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && sed -n '1,120p'...
Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && grep -n "PACK_R...21:55:47Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && grep -n "PACK_R...
Thinking21:55:55

The sound_picker only builds its index lazily when opened, not at boot, so it's harmless unless the owner actually opens the picker — it just expects a path at `~/Desktop/sound packs`. I'll leave that as-is and flag it clearly in the report as a non-blocking, lazy dependency rather than a boot issue.

Now I want to check whether the emoji package is coupled to Horse Game globals — scanning sounds.lua, transition.lua, fx.lua, plants.lua, ui/init.lua, sound_tuner.lua, cursor.lua, and effect_lab.lua for any globals referenced at load or update time that might actually come from knightvspawns.

Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && echo "=== curso...21:55:56Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && echo "=== curso...
Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && echo "=== ui/in...21:55:56Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && echo "=== ui/in...
Thinking21:56:11

I'm checking cursor.lua and noticing that `spawn_cursor()` isn't actually called on require, which contradicts the brief's assumption that the pointing-hand cursor installs itself automatically — so it needs a host call plus a cursor layer and click binding to work at all.

Also since WINDRANG's layer list has no cursor layer either, I'm treating this as: leave it off since it doesn't self-install, and report that fact along with the one-line fix (add cursor layer, bind click, call spawn_cursor, wire update/draw).

Now I want to check transition.lua's reliance on global `gw`/`gh`, and since we won't call transition_update it may not matter, but I should grep the rest of the package for other undefined globals like these.

Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && echo "=== gw/gh...21:56:11Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && echo "=== gw/gh...
Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns && sed -n '1,140p' main....21:56:11Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns && sed -n '1,140p' main....
Thinking21:56:19

I need to set the host globals like width and height before requiring emoji, mirroring what the host does, so emojunky's main.lua should do the same. I also notice fx.lua nil-guards main_camera before attaching it to the digit layer, so I could just assign main_camera = cam to hook the lab's camera into that system.

But cam is created in boot.lua and I'm not sure if it's room-dependent, so I should check whether it persists across rooms. I also need to look at fx.lua more closely to see what other layers or globals it expects, since emoji_layers might not create a digit_layer the way fx.lua assumes.

Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && echo "=== layer...21:56:20Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && echo "=== layer...
Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && grep -rn "digit...21:56:20Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && grep -rn "digit...
Thinking21:56:37

I'm checking that effects_layer exists at the time fx constructors run since args.layer falls back to it, and confirming digit_layer is set up properly at require time. I'm also noting that main_camera is nil-guarded, but if it's nil the damage numbers would end up drawing in screen space instead.

I could set main_camera = cam right after boot.lua creates the camera, since fx.lua reads main_camera at render time rather than at load time, so ordering isn't an issue. I verified the juice.lua references to main_camera are just in a documentation comment block, not actual reads, while fx.lua has the real usages. Now I'm looking at sounds.lua and noticing it hard-loads a sound asset at boot, which conflicts with the brief's guidance about not eagerly loading assets.

Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && sed -n '300,470...21:56:37Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && sed -n '300,470...
Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && sed -n '1,120p'...21:56:37Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && sed -n '1,120p'...
Thinking21:56:55

I'm considering what happens at boot time if ball_wall.ogg is missing when sound_load runs — it likely errors, prints a warning, or crashes. I'm weighing whether adding a single test sound file counts as violating the "no sound bank" rule, since one file seems different from a whole asset bank.

Actually, deleting the sound_load line and the volumes.ball_wall entry seems like the right decoupling — leave volumes as an empty table so the module boots with no sounds declared, exactly as the brief wants. I still need to check whether anything else references sounds.ball_wall, and whether sound_tuner touches it too.

I'm also looking at the sound_tuning.lua file with its horse-game-specific tuning table keyed to sound asset paths — it's harmless dead data, but emptying it would be the cleaner, more consistent decoupling even though it means losing a template for future sound tuning.

I should check volume_tuning.lua and sound_tuning.lua's headers, then scan sound_tuner.lua, effect_lab.lua, ui/gallery.lua, plants.lua, juice.lua, and effect.lua for any top-level code that touches game globals at boot time. Rather than manually tracing every dependency, it might be faster to just copy everything over and try booting the game to see what errors surface, while still doing a proper grep-based audit of global reads to satisfy the brief's requirement.

A more targeted approach would be scanning sound_tuner.lua specifically, since it's the largest dev overlay, checking for game-specific identifiers like SOUND_MOMENTS, fx_lab, or items that would indicate coupling to knightvspawns internals.

Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && echo "=== ball_...21:56:55Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && echo "=== ball_...
Thinking21:57:01

My plan is to remove the ball_wall sound entry and empty out the volumes table in sounds.lua, then clear the return tables in both sound_tuning.lua and volume_tuning.lua. Now I want to check sound_tuner.lua, effect_lab.lua, and sound_picker.lua for any coupling at require-time or update-time, including whether they bind keys.

Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && echo "=== top-l...21:57:03Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && echo "=== top-l...
Thinking21:57:14

I need to check whether unbound actions cause errors when queried, and whether these update functions actually get called anywhere by the host. If the lab's update loop never invokes them, the pause/resume logic would just sit dormant and unused.

Since the brief only mentions loading the overlays, not wiring their update loops, keeping them loaded-but-unwired is the safest interpretation and worth noting in my report. Still, I should double-check whether requiring `sound_tuner.lua` or `effect_lab.lua` triggers any top-level code that touches game state beyond simple constant definitions.

Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && for f in sound_...21:57:15Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && for f in sound_...
Thinking21:57:27

No boot-time coupling apparent besides the sounds line. I'm now checking whether palette.lua's global color names like white, black, red, green, blue could collide with view.lua's own color constants, and also tracing how the time global gets used by cursor.lua.

Other collision risks: game_layer should match since emoji_layers creates one for the 'game' entry, though ui_layer is replaced by ui_content_layer. I also want to check whether names like run, world, player, robot, map, T, D, and cam clash between the lab and the emoji package, and confirm fxs/world.fx don't conflict either. I should grep for these identifiers across the emoji package, and also diff the two framework copies (knightvspawns vs emojunky) since the brief notes only knightvspawns' emoji is proven on the current framework.

Bashcd /c/Users/a327e/Desktop/a327ex && echo "=== framework diff kvp vs emojunky ===...21:57:27Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex && echo "=== framework diff kvp vs emojunky ===...
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && grep -n "^COL_\|^local COL_\|= colo...21:57:27Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && grep -n "^COL_\|^local COL_\|= colo...
Thinking21:57:36

Good, no naming collision with palette.lua. I confirm the framework copies across emojunky and knightvspawns are identical except for the VERSION file, so the emoji package should work fine. Now I'm moving on to check the next piece.

Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/assets && ls | wc -l && ...21:57:38Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/assets && ls | wc -l && ...
Thinking21:57:44

I see effect.lua references a fragment shader asset, so I should also check the ui directory for other asset loads. I'll search the whole package for image, shader, font, spritesheet, and sound loading calls outside of init.lua and pipeline.lua.

Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && grep -rn "image...21:57:44Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && grep -rn "image...
Thinking21:57:50

I see that effect.lua's effect_setup loads the draw_shader.frag asset. Now I want to look at view.lua, which is fairly large, to understand its structure—the function definitions and how layers are referenced.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && echo "=== functions ===" && grep -n...21:57:50Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && echo "=== functions ===" && grep -n...
Thinking21:57:56

I need to look at view.lua's key sections—constants, HUD drawing, debug rendering, digging visuals, reach and sky/tile drawing, depth lines, and help banners. Since it's around 820 lines, I'll read through the whole file.

ReadC:\Users\a327e\Desktop\a327ex\emojunky\view.lua21:57:56Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\view.lua
Thinking21:58:02

I need to trace where camera and window dimensions are referenced elsewhere—boot.lua's camera creation, controller.lua's lab update and snap functions, game.lua's panning logic—so I'm going to grep for width, height, and hardcoded values like 480/20 across controller.lua, game.lua, rooms.lua, world.lua, and tuning.lua.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && echo "=== width/height refs outside...21:58:02Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && echo "=== width/height refs outside...
Thinking21:58:06

Good, the camera height is derived from the view height divided by tile size, so it adapts automatically. Now I want to check the camera functions in controller.lua around lines 1040-1120, plus the camera pan logic in game.lua.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && sed -n '1030,1120p' controller.lua ...21:58:07Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && sed -n '1030,1120p' controller.lua ...
Thinking21:58:15

I notice the camera has no horizontal clamp, fixing at the dig world's center, so with a 16-tile world narrower than the 640px viewport, void will show on both sides beyond the walls—something the brief already flagged as acceptable to report rather than fix.

Bashcd /c/Users/a327e/Desktop/a327ex && grep -n "world_bedrock\|world_w" emojunky/wo...21:58:16Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex && grep -n "world_bedrock\|world_w" emojunky/wo...
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && grep -n "\bwidth\b\|\bheight\b\|480...21:58:16Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && grep -n "\bwidth\b\|\bheight\b\|480...
Thinking21:58:23

Since verify.lua derives height-based values like camp_cam_y, it should adapt automatically, but I want to double check the marker section around lines 1287-1310 since it relies on screen height for detecting off-screen elements. I also want to understand how verify.lua is structured and executed, and how it reports pass/fail, so I'll read through its header, that section, and the tail.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && sed -n '1,60p' tools/verify.lua | c...21:58:23Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && sed -n '1,60p' tools/verify.lua | c...
Thinking21:59:13

At 640 wide, the camera anchors on the human player and the view height stays 360/24=15 tiles unchanged, so only width changed from 480 to 640 and vertical positioning is unaffected. That means the marker's x-position clamping and HUD placement, which depend on width, are what actually need checking here.

For the dig room, camera x is fixed at world center (192px), and with a 320px half-width view we'd see from -128 to 512px — well beyond the 0-15 tile world, so bedrock should fill the out-of-bounds tiles on both sides rather than leaving a void, which seems correct. For the other rooms where the camera follows the player freely, a wider view could expose out-of-bounds tiles, so I need to check what tile_solid returns for out-of-bounds coordinates in rooms.lua — if it just returns false we'd see background color, which is probably fine to note in the report. I also want to double check the dig marker margin settings in game.lua before moving on.

Now I'm shifting to planning the actual emojunky implementation: copying the knightvspawns emoji folder as a base, then decoupling it by stripping out sound/volume references and tuning tables, copying over the needed image, font, and shader assets, and setting up main.lua with the correct window size, title, and globals before requiring the emoji module.

I need to be careful about init order — emoji/init.lua registers fonts and sets up the palette and effects, and pipeline.lua creates shader layers and loads shader files at require time, so I want to make sure require('emoji') happens after gw/gh are set and won't accidentally re-run on hot reload since Lua caches loaded modules.

The comment about missing headless guards is fine here since agent instances still get a GL context via the hidden surface window, so shader_set_vec2_immediate calls at require time won't segfault. Now I'm updating draw() to use the new emoji layers and emoji_render(), rewriting the header comment, and updating boot.lua to replace the old game_layer/ui_layer setup with the new emoji layer creation.

Since boot.lua runs after emoji is required in main.lua, the ordering works out fine, and I'll set main_camera after camera creation for the fx digit layer while keeping the debug/hud fonts as-is. Then in view.lua I need to re-route the layer mapping so world draws go to bg_layer instead of game_layer, actors draw into the new game_layer with its outline and shadow, and effects get remapped accordingly.

Working out the full mapping: world elements (tiles, bedrock, sky, depth lines, reach rectangle, dig progress, cursor highlight) go to bg; actors (human, robot, ropes, hitboxes, attached hearts, nuggets) go to game; blasts, sparks, rings, pops, and floating text go to effects; HUD, banners, help text, and debug readout go to ui.

Going function by function, tiles draw to bg, ropes draw to game since they're actors, and for the player sprite/hitbox/hand window/slide bar those go to game too. The tricky part is the floating damage text and notice text above the character — the brief explicitly lists floating text under effects, so even though they're camera-attached and rendered in world-space like the game layer, I'll route them to effects rather than keeping them with the actor.

The room annotation labels are trickier since they're world-space text but not actors or effects or HUD — they're really world annotations, so bg makes sense even without an outline since gray text reads fine there. HUD and debug overlays clearly go to ui_content. Nuggets are trickier since `dig_nugget` gets called both for buried nugget hints inside tiles (world-space) and loose nuggets that count as actors, so I need to split that function's routing based on which caller invokes it.

I'll add a layer parameter to `dig_nugget` so it can be called with the correct target for each context, and I need to check verify.lua and snapshot.lua don't call it directly before changing its signature. Going through the rest: dig sky, tiles, depth lines, reach, and cursor all go to bg, nuggets and the robot go to game, and I'm still deciding where the camp tent belongs since it isn't explicitly categorized in the brief.

Since it's a discrete physical object rather than terrain, I'll assign it to game, and its floating text goes to effects along with the dig fx and popups. Now I'm figuring out where the HUD drawing function belongs.

Looking at the background draw call, it's a full-screen rect drawn before camera attach, so it belongs in the bg layer since it's screen-space. With three world layers now (bg, game, effects), I realize the shake push needs to apply to each layer individually rather than just one — I'm restructuring the attach/detach logic to loop through all world layers.

Writing camera attach helper...

I need to double check whether camera_attach queues a command into the layer or sets some shared state, since that affects whether looping the attach across layers actually works correctly.

Then I want to trace through how `tools/snapshot.lua` captures the frame — whether `engine_snapshot` fires after `engine_step` runs the full draw, and whether I need to explicitly call `layer_draw` before `site_debug.snap`, similar to how the lab's draw loop did it before capturing.

Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine && grep -rn "engine_snapshot" doc...21:59:14Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine && grep -rn "engine_snapshot" doc...
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && grep -n "function camera_attach\|fu...21:59:14Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && grep -n "function camera_attach\|fu...
Thinking21:59:37

I'm confirming camera_attach can queue to multiple layers via repeated layer_push calls, and that camera_new correctly sets dimensions to 640x360. I'm also tracing how engine_snapshot captures the composited backbuffer from the current draw() call during engine_step.

I realize snapshot.lua doesn't need functional changes since it already relies on engine_step to drive draw() and never calls layer_draw itself — that pattern belongs to a different harness (the site renderer). I'm considering whether to add a clarifying comment in the header about how the snapshot pipeline is actually driven.

One thing I still need to check: what background color the engine clears the page to by default, and whether the lab's own background rectangles (now moved into bg_layer) still fully cover that clear color across the new layer stack.

Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && cat -n palette....21:59:38Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && cat -n palette....
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && grep -n "background\|clear_color\|b...21:59:38Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && grep -n "background\|clear_color\|b...
Thinking21:59:52

I'm checking for naming collisions across the global variables defined in palette.lua, view.lua, fx.lua, world.lua, and plants.lua, and so far nothing overlaps.

Now I'm scanning view.lua's function names like `text_center` and `text_right` against the emoji package to see if anything conflicts, so I'm compiling a full list of the lab's global function names to run a systematic collision check.

I also need to check `class()` usages — emoji defines classes like `cursor`, `plant`, and `hit_circle` — before actually running the comparison.

Bashcd /c/Users/a327e/Desktop/a327ex && grep -rhoE "^function [A-Za-z_][A-Za-z_0-9]*...21:59:55Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex && grep -rhoE "^function [A-Za-z_][A-Za-z_0-9]*...
Thinking22:00:00

No collisions found. Now I want to check whether those variable names like world, run, map, player, robot, cam, T, or D are actually referenced anywhere within the emoji directory, so I'll grep for word-boundary usages.

Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && for n in world ...22:00:01Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && for n in world ...
Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && echo "--- world...22:00:01Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && echo "--- world...
Thinking22:00:20

Everything else looks like comments or local parameters, with the only real dependencies being on `main_camera`, `gw`/`gh`, `EMOJI_PARTICLE_PX`, `GAME_HOSTED`, and the cursor/transition layer conventions—all properly nil-guarded. I want to verify how `EMOJI_PARTICLE_PX` is used elsewhere in fx.lua to make sure the fallback value is consistent.

I should also check other globals like `SOUND_PICKER_MUTE` and `UI_TIERS` for similar `or` guards, and confirm sound_moments.lua's file-writing behavior is safe since it only autosaves when opened. Let me grep across the package for any `require` calls to spot modules outside this folder.

Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && echo "=== requi...22:00:21Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/emoji && echo "=== requi...
Thinking22:00:30

I'm noting that gallery.lua needs the overlay layer and background color only when opened, and volume_tuning is optional via pcall. Now I'm mapping out the implementation order: copy the emoji package and assets, decouple the sounds, then edit main.lua, boot.lua, and view.lua.

After that comes writing the docs and verifying everything works. Let's start with the copies.

ccd session: mark_chapter{"title": "emoji toolkit copy-in", "summary": "Copying the emoji package and its boot assets into emojunky"}22:00:30Output not recorded
Input
{"title": "emoji toolkit copy-in", "summary": "Copying the emoji package and its boot assets into emojunky"}
Bashset -e SRC=/c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns DST=/c/Users/a32...22:00:30Output not recorded
Input
set -e SRC=/c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns DST=/c/Users/a32...
Bashset -e SRC=/c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/assets DST=/c/Us...22:00:30Output not recorded
Input
set -e SRC=/c/Users/a327e/Desktop/a327ex/ABAgames/knightvspawns/assets DST=/c/Us...
Thinking22:00:49

The .gitkeep file was already there originally, just hidden from a normal listing, so that's fine. Now I'm moving on to decouple the sound modules by editing the relevant lines in emoji/sounds.lua.

ReadC:\Users\a327e\Desktop\a327ex\emojunky\emoji\sounds.lua22:00:49Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\emoji\sounds.lua
EditC:\Users\a327e\Desktop\a327ex\emojunky\emoji\sounds.lua22:00:49Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\emoji\sounds.lua
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky/emoji && cat > sound_tuning.lua <<'EOF...22:00:49Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky/emoji && cat > sound_tuning.lua <<'EOF...
Thinking22:01:11

I'm now working out main.lua's structure, setting up the emoji layer stack with background, game, cover, effects, overlay, and UI layers in WINDRANG's ordering with their outline and shadow flags.

I'm considering which layers should get the camera transform — likely the world layers (bg, bg_plants, game, cover, effects) — and want to check windrang's actual draw() implementation to match its approach faithfully.

Bashcd /c/Users/a327e/Desktop/a327ex/ABAgames/windrang && grep -n "function draw()" ...22:01:11Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/ABAgames/windrang && grep -n "function draw()" ...
Thinking22:01:30

I've confirmed the camera attaches per world layer on the host side, with the bg layer holding world tiles and thus being camera-attached except for the full-screen backdrop drawn before that attachment. Now I'm starting to write main.lua, setting up the anchor library with window dimensions sized to fit the tile grid.

Continuing with setup, I'm establishing screen-size globals, requiring the emoji toolkit for palette, pipeline, effects, UI, and fonts, and defining the tile pixel size constant—noting that this require must come after the engine initializes since it registers fonts and needs width/height globals for the pixel shader.

Now I'm structuring the draw function: it checks whether the world map exists to decide between the main game draw or a setup screen, and for the setup screen it clears the background, attaches the camera to draw tiles, labels, ropes, and the player, then detaches before drawing the HUD, debug info, and finally the emoji rendering pass. I'm noting that the attach/detach helpers will need a list of world layer objects created during boot, which I still need to define.

I'm deciding to build that layer list once during boot as a persistent global table rather than reconstructing it every frame, since view.lua reloads but boot's globals survive. Then I'm writing the attach and detach functions that iterate through those layers, pushing a shake offset and attaching the camera to each on attach, and reversing that on detach—now double-checking the exact parameter signature for the layer push call.

I need to make sure `main_camera` is set globally for damage-number effects, and I'm noting that `emoji_set_icon_channels` isn't necessary here. Since this stack has no cursor or transition layer, I'll skip calling those draw/update functions since they'd break otherwise. I'm also confirming that the background rectangles get placed in the background layer without camera attachment so they stay fixed in screen space.

Checking whether the background tile should have an outline — it shouldn't, keeping that look plain, while the effects layer should keep outlines and shadows per the family style guide for blasts, sparks, and pops. Now I want to verify the layer_push signature before continuing.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && grep -n "^function layer_push\|^fun...22:01:31Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && grep -n "^function layer_push\|^fun...
Thinking22:01:35

Now I'll start making the edits, beginning with main.lua.

EditC:\Users\a327e\Desktop\a327ex\emojunky\main.lua22:01:41Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\main.lua
EditC:\Users\a327e\Desktop\a327ex\emojunky\main.lua22:01:41Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\main.lua
EditC:\Users\a327e\Desktop\a327ex\emojunky\main.lua22:01:41Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\main.lua
EditC:\Users\a327e\Desktop\a327ex\emojunky\main.lua22:01:41Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\main.lua
Thinking22:02:14

I'm double-checking the remaining "lab" references in the header text but those are historical mentions in batch descriptions and fine to keep as-is. Now I'm moving on to boot.lua.

EditC:\Users\a327e\Desktop\a327ex\emojunky\boot.lua22:02:28Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\boot.lua
Thinking22:02:50

I should also swap the leftover "lab:" print label in boot.lua to "emojunky:" for consistency. I don't think I need a click bind since no cursor is spawned and UI widgets aren't in use here.

Now onto the bigger task of reorganizing view.lua's draw calls across the bg, game, effects, and ui_content layers. I'm sorting which functions belong entirely to background rendering (tiles, labels, dig sky/tiles, depth lines, reach, cursor), which belong to the game layer (ropes, player, nuggets, robot, dig camp/human, minus floating text), and which effects and HUD functions need their own separate layer, then planning targeted line-range edits to reassign each function's layer argument and add world_attach/world_detach plus a header rewrite.

Mapping the remaining draw functions...draw_dig_human, draw_robot_marker, draw_dig_fx, draw_dig_popups, draw_dig_hud, draw_dig_debug, and game_draw...to their appropriate layers, then thinking about applying all these sed edits in one pass across line ranges so the numbering stays consistent.

Adding more sed ranges...

After that I still need to handle a few stragglers manually: the draw_player text lines, the dig_nugget function signature and its call sites, and the game_draw references, plus double-checking the dig_nugget definition block that also references game_layer.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && cp view.lua /c/Users/a327e/AppData/...22:02:55Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && cp view.lua /c/Users/a327e/AppData/...

Now the exceptions: the floating damage text, dig_nugget's layer parameter, and game_draw.

EditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua22:03:03Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\view.lua
EditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua22:03:03Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\view.lua
EditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua22:03:03Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\view.lua
EditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua22:03:03Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\view.lua
EditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua22:03:03Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\view.lua

Now game_draw() and the world-layer bracket helpers.

EditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua22:03:35Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\view.lua

Now the view.lua header, which still describes the old two-layer model.

EditC:\Users\a327e\Desktop\a327ex\emojunky\view.lua22:03:46Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\view.lua
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && sed -i "s/print(string.format('lab:...22:03:46Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && sed -i "s/print(string.format('lab:...
Thinking22:03:56

I want to boot it up and run a syntax check with `anchor check .`, first confirming that command is available in Git Bash. I should also verify whether tools/snapshot.lua or verify.lua reference `dig_nugget`, `game_layer`, or `ui_layer` — I already confirmed no `ui_layer` outside anchor/emoji, so now I'll grep tools/ for the other two.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && grep -n "dig_nugget\|game_layer\|la...22:03:56Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && grep -n "dig_nugget\|game_layer\|la...
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor check . 2>&1 | tail -4022:03:56Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor check . 2>&1 | tail -40
Thinking22:04:10

All clean aside from 58 warnings, all confined to the copied dev overlay from the sound tuner referencing Horse Game's F7 fx lab globals — nil-guarded reads that only trigger if the tuner is opened, which it never is. I'm double-checking that those references like FXLAB and fx_import_entry are indeed Horse-Game-specific leftovers and not something I need to worry about.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky/emoji && sed -n '285,295p;403,410p;470...22:04:10Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky/emoji && sed -n '285,295p;403,410p;470...
Thinking22:04:17

These unguarded reads sit inside a lab-only branch that never actually executes since the tuner is never opened here—no toggle bind, no update call. So I'll flag them as warnings only, not real stop conditions, and note it as left-alone coupling.

Now let me boot the game in an agent instance to verify.

ccd session: mark_chapter{"title": "Boot and verify", "summary": "Driving an agent instance, running the 216-assert suite and the snapshots"}22:04:17Output not recorded
Input
{"title": "Boot and verify", "summary": "Driving an agent instance, running the 216-assert suite and the snapshots"}
Agent run, 10 steps (20260913-220420.apr)
1. engine_step(4) return width, height, map.name, tostring(bg_layer ~= nil), tostring(ui_content_layer ~= nil), #WORLD_LAYERS
-> 640
360
calibration
true
true
5
2. script tools\verify.lua
--[[
  tools/verify.lua — the lab's assertion run.

  Run it against a live agent instance:

    anchor drive start lab
    anchor drive eval  lab --file tools/verify.lua
    anchor drive stop  lab

  It drives the real controller through the real input pump
  (input_inject_key -> the SDL queue -> input_pressed inside update), steps the
  engine, and prints every measured value next to its target. Poses are set
  directly (player.x = ...) ONLY to put the character somewhere; nothing about
  the controller's behaviour is faked.

  The one exception is `lab_jump_hold_ticks`, which forces the jump button to
  read as released after N ticks: a rendered frame is two ticks, so a 1-tick
  tap cannot otherwise be scripted. The 2-tick tap is measured as well, by
  pure key injection, and both are reported.

  Returns the report as a string (the eval channel prints it) and also writes
  it to tools/verify-report.txt.
]]

local R = {}
local pass_n, fail_n = 0, 0

local function line(s) R[#R + 1] = s end

local function check(name, measured, target, tol)
  local ok
  if tol then ok = math.abs(measured - target) <= tol else ok = (measured == target) end
  if ok then pass_n = pass_n + 1 else fail_n = fail_n + 1 end
  local m = (type(measured) == 'number') and string.format('%.4g', measured) or tostring(measured)
  local t = (type(target) == 'number') and string.format('%.4g', target) or tostring(target)
  line(string.format('%-4s %-46s measured %-12s target %s%s',
    ok and 'PASS' or 'FAIL', name, m, t, tol and string.format(' +-%.3g', tol) or ''))
  return ok
end

-- ── input plumbing ─────────────────────────────────────────────────────────
local held = {}
local function key(name, down)
  if held[name] == down then return end
  held[name] = down
  input_inject_key(name, down)
end
local function release_all()
  for k, v in pairs(held) do
    if v then input_inject_key(k, false) end
    held[k] = false
  end
  engine_step(1)
end
local function tap_key(name)
  key(name, true)
  engine_step(1)
  key(name, false)
end

-- ── pose plumbing ──────────────────────────────────────────────────────────
local function pose(x, y, state)
  local p = player
  p.x, p.y = x, y
  p.vx, p.vy = 0, 0
  p.state = state or 'fall'
  p.crouched = false
  p.hp, p.ropes = T.hp, T.rope_count
  p.hang_lock, p.rope_lock, p.buffer, p.coyote = 0, 0, 0, 0
  p.jump_hold, p.jump_hold_t, p.jump_hold_ticks = false, 0, 0
  p.jump_apex, p.jump_from_y = 0, y
  p.lower_hold, p.peek, p.peek_hold = 0, 0, 0
  p.last_land_h, p.last_land_dmg, p.last_land_t = 0, 0, 0
  p.last_rope_kick = 0
  p.rope = nil
  p.wall_lock, p.wall_coyote_t, p.wall_coyote_dir = 0, 0, 0
  p.force_x, p.force_t = 0, 0
  p.last_wj_vx, p.last_wj_dir = 0, 0
  p.wall_side = 0
  fall_reset(p)
  ropes = {}
  hurt_flash = 0
  camera_snap()
end

local function fresh(room)
  release_all()
  room_load(room or 'calibration')
  engine_step(1)
end

-- Step frame by frame until pred() or n frames have passed. Returns frames used.
local function step_until(pred, n)
  for i = 1, n do
    engine_step(1)
    if pred() then return i end
  end
  return n
end

local GROUND_Y = CALIBRATION_GROUND - D.hh   -- centre y of a character standing on the surface

-- ── 1. jump apexes ─────────────────────────────────────────────────────────
line('--- jump ---')
fresh('calibration')
pose(4.5, GROUND_Y, 'stand')
engine_step(3)
key('space', true)
engine_step(70)
key('space', false)
check('held jump apex (tiles)', player.jump_apex, T.jump_apex_held, 0.03)
release_all()

fresh('calibration')
pose(4.5, GROUND_Y, 'stand')
engine_step(3)
lab_jump_hold_ticks = 1
key('space', true)
engine_step(70)
key('space', false)
lab_jump_hold_ticks = nil
check('tap jump apex, released after 1 tick', player.jump_apex, T.jump_apex_tap, 0.05)
release_all()

fresh('calibration')
pose(4.5, GROUND_Y, 'stand')
engine_step(3)
key('space', true)
engine_step(1)                -- one rendered frame = two ticks
key('space', false)
engine_step(70)
check('tap jump apex, released after 2 ticks', player.jump_apex, T.jump_apex_tap, 0.09)
release_all()

-- ── 2. speeds ──────────────────────────────────────────────────────────────
line('--- speeds ---')
local function speed_test(name, keys, target, tol)
  fresh('calibration')
  pose(2.5, GROUND_Y, 'stand')
  engine_step(3)
  for _, k in ipairs(keys) do key(k, true) end
  engine_step(40)
  local vx = player.vx
  release_all()
  check(name, vx, target, tol)
end
speed_test('walk speed (tiles/s)',  {'d'},            T.walk_speed,  0.05)
speed_test('run speed (tiles/s)',   {'d', 'lshift'},  T.run_speed,   0.1)
speed_test('crawl speed (tiles/s)', {'d', 's'},       T.crawl_speed, 0.05)

-- ── 3. terminal velocity ───────────────────────────────────────────────────
line('--- terminal velocity ---')
fresh('calibration')
local deep = CALIBRATION_PITS[#CALIBRATION_PITS]
pose(deep.x + 2, GROUND_Y, 'fall')
engine_step(40)               -- 0.67 s: terminal is reached at 0.36 s
check('terminal velocity (tiles/s)', player.vy, T.terminal_velocity, 0.1)

-- ── 4. fall damage tiers ───────────────────────────────────────────────────
line('--- fall damage (walk-off into the calibration pits) ---')
local function pit_test(depth, expect_dmg)
  local pit
  for _, q in ipairs(CALIBRATION_PITS) do if q.d == depth then pit = q end end
  fresh('calibration')
  pose(pit.x + 2, GROUND_Y, 'fall')
  step_until(function() return on_ground(player) or player.state == 'dead' end, 400)
  engine_step(2)
  local dmg = player.last_land_dmg
  local h = player.last_land_h
  check(string.format('%d-tile pit: damage', depth), dmg, expect_dmg)
  line(string.format('       equivalent height measured %.3f tiles (pit is %d), hp now %d',
                     h, depth, player.hp))
end
pit_test(7, 0)
pit_test(8, 1)
pit_test(16, 2)
pit_test(24, 99)
check('24-tile pit kills', player.state, 'dead')

-- ── 5. ledge grab: the 2-tile step yes, the 3-tile step no ─────────────────
line('--- ledge grab ---')
local function step_grab(x_left, label)
  fresh('calibration')
  pose(x_left, GROUND_Y, 'stand')
  engine_step(3)
  key('d', true)
  engine_step(10)             -- walk into the face
  key('space', true)
  step_until(function() return player.state == 'hang' end, 60)
  local st = player.state
  release_all()
  return st, label
end
local st2 = step_grab(CALIBRATION_STEP2_X - 1.3, '2-tile')
check('standing jump at the 2-tile step -> hang', st2, 'hang')
local st3 = step_grab(CALIBRATION_STEP3_X - 1.3, '3-tile')
check('standing jump at the 3-tile step -> not hang', st3 ~= 'hang', true)

-- ── 6. from hang: drop, and the lockout; then the mantle ───────────────────
line('--- hang ---')
local function get_hang()
  fresh('calibration')
  pose(CALIBRATION_STEP2_X - 1.3, GROUND_Y, 'stand')
  engine_step(3)
  key('d', true)
  engine_step(10)
  key('space', true)
  step_until(function() return player.state == 'hang' end, 60)
  key('space', false)
  key('d', false)
  engine_step(1)
  return player.state == 'hang'
end

check('reached hang for the drop test', get_hang(), true)
key('s', true)
key('space', true)
engine_step(1)
check('hang + down + jump -> fall', player.state, 'fall')
check('hang lockout after the drop (s)', player.hang_lock, T.hang_lockout, 0.02)
key('s', false)
key('d', true)                                    -- hold BACK into the wall
local regrabbed = false
for _ = 1, 9 do                                   -- 9 frames = 0.15 s, the lockout
  engine_step(1)
  if player.state == 'hang' then regrabbed = true end
end
check('no grab possible during the 0.15 s lockout', regrabbed, false)
release_all()

check('reached hang for the mantle test', get_hang(), true)
key('space', true)
engine_step(1)
key('space', false)
step_until(function() return player.state == 'stand' end, 60)
check('hang + jump -> climb_up -> stand', player.state, 'stand')
check('  standing on top of the corner tile (y)', player.y, 10 - D.hh, 0.02)
check('  standing over the corner tile (x)', player.x, CALIBRATION_STEP2_X + 0.5, 0.02)
release_all()

-- ── 7. crouch to a lip, then lower-off ─────────────────────────────────────
line('--- lower-off ---')
fresh('calibration')
local pit1 = CALIBRATION_PITS[1]
pose(pit1.x - 2.5, GROUND_Y, 'stand')
engine_step(3)
key('s', true)
key('d', true)
local lip_x, lip_frame, lower_frame, hang_frame = nil, nil, nil, nil
for i = 1, 240 do
  engine_step(1)
  if not lip_x and player.state == 'crouch' and at_lip(player, 1) then
    lip_x, lip_frame = player.x, i
  end
  if not lower_frame and player.state == 'lower_off' then lower_frame = i end
  if not hang_frame and player.state == 'hang' then hang_frame = i break end
end
check('crawl stops at the lip (box right edge)', (lip_x or 0) + D.hw, pit1.x, 0.03)
check('holding toward the drop enters lower_off', lower_frame ~= nil, true)
check('lower_off ends in hang', hang_frame ~= nil, true)
if lip_frame and lower_frame then
  check('hold before lower_off (s)', (lower_frame - lip_frame)/60, T.lower_off_hold, 0.05)
end
release_all()

-- ── 8. rope throws ─────────────────────────────────────────────────────────
line('--- ropes ---')
fresh('calibration')
pose(CALIBRATION_ROPE8_X + 0.5, GROUND_Y, 'stand')
engine_step(3)
tap_key('e')
step_until(function() return ropes[1] and ropes[1].phase == 'set' end, 120)
if ropes[1] then
  check('rope up under the 8-tile ceiling: anchor row',
        ropes[1].top_ty, CALIBRATION_GROUND - 8)
  check('  segments unrolled', rope_length_of(ropes[1]), T.rope_length)
  check('  ropes left', player.ropes, T.rope_count - 1)
else
  check('rope up under the 8-tile ceiling', false, true)
end
release_all()

fresh('calibration')
pose(CALIBRATION_ROPE4_X + 0.5, GROUND_Y, 'stand')
engine_step(3)
tap_key('e')
step_until(function() return ropes[1] and ropes[1].phase == 'set' end, 120)
if ropes[1] then
  check('rope up under the 4-tile ceiling: anchor row',
        ropes[1].top_ty, CALIBRATION_GROUND - 4)
  check('  unrolls until the floor (segments)', rope_length_of(ropes[1]), 4)
else
  check('rope up under the 4-tile ceiling', false, true)
end
release_all()

fresh('calibration')
pose(pit1.x - D.hw, GROUND_Y, 'stand')     -- box right edge exactly on the lip
player.facing = 1
engine_step(2)
key('s', true)
tap_key('e')
engine_step(2)
if ropes[1] then
  check('rope down at a lip: anchor column (one ahead)', ropes[1].col, pit1.x)
  check('  anchor row = the thrower height', ropes[1].top_ty, CALIBRATION_GROUND - 1)
else
  check('rope down at a lip placed a rope', false, true)
end
release_all()

check('reached hang for the rope-down test', get_hang(), true)
key('s', true)
tap_key('e')
engine_step(2)
if ropes[1] then
  check('rope down from a hang: anchor column', ropes[1].col, CALIBRATION_STEP2_X - 1)
  check('  anchor row = the hang row', ropes[1].top_ty, player.hang_ty)
else
  check('rope down from a hang placed a rope', false, true)
end
release_all()

-- ── 9. catching a rope mid-fall ────────────────────────────────────────────
line('--- rope catch ---')
local function rope_in_pit()
  fresh('calibration')
  local r = rope_place(deep.x + 2, CALIBRATION_GROUND + 6)
  r.bottom_ty = r.top_ty + T.rope_length - 1
  r.phase = 'set'
  pose(deep.x + 2 + 0.5, GROUND_Y, 'fall')
  ropes = {r}
  return r
end

local r1 = rope_in_pit()
key('w', true)
step_until(function() return player.state == 'rope' end, 200)
check('falling past a rope while holding up -> rope', player.state, 'rope')
check('  fall counter zeroed', player.fall_time, 0, 1e-9)
local caught_at = player.y
line(string.format('       caught at y %.2f (rope rows %d..%d)', caught_at, r1.top_ty, r1.bottom_ty))

-- 10. jumping off the rope with a direction held
key('w', false)
key('d', true)
engine_step(1)
tap_key('space')
engine_step(1)
check('jump off a rope with a direction: sideways kick', player.last_rope_kick, T.rope_jump_kick, 0.01)
check('  rope lockout after a jump-off (s)', player.rope_lock, T.rope_lockout_jump, 0.05)
release_all()

rope_in_pit()
step_until(function() return on_ground(player) or player.state == 'dead' end, 300)
check('falling past a rope WITHOUT holding up -> no catch', player.state ~= 'rope', true)
release_all()

-- ── 11. coyote time, the low corridor, peek, restart ───────────────────────
line('--- misc ---')
fresh('calibration')
pose(pit1.x - 1.2, GROUND_Y, 'stand')
engine_step(3)
key('d', true)
step_until(function() return player.state == 'fall' end, 120)
tap_key('space')                                  -- inside the 0.08 s coyote window
engine_step(1)
check('coyote jump just after walking off a lip', player.state, 'jump')
release_all()

fresh('calibration')
pose(45.5, GROUND_Y, 'stand')
engine_step(3)
key('d', true)
engine_step(150)
check('walks through the 1-tile corridor (x past 57)', player.x > 57, true)
release_all()

fresh('calibration')
pose(4.5, GROUND_Y, 'stand')
engine_step(3)
key('s', true)
engine_step(60)                                   -- 1 s: 0.4 s delay then 0.6 s of scroll
check('peek down after peek_delay (tiles)', player.peek, (1 - T.peek_delay)*T.peek_speed, 0.1)
release_all()

fresh('calibration')
pose(deep.x + 2, GROUND_Y, 'fall')
step_until(function() return player.state == 'dead' end, 400)
check('death in the deepest pit', player.state, 'dead')
tap_key('r')
engine_step(2)
check('R restarts the room', player.hp, T.hp)
check('  and leaves the dead state', player.state ~= 'dead', true)
release_all()

-- ══ BATCH 2: WALLS ═════════════════════════════════════════════════════════
-- Every wall check runs in the `walls` room, whose stations are named by the
-- WALLS_* constants in rooms.lua. A pose puts the character somewhere; the
-- controller does the rest through the real input pump.

--[[ wall_pose(x, y, facing) — drop the character into the walls room at a pose. ]]
local function wall_pose(x, y, facing)
  release_all()
  room_load('walls')
  engine_step(1)
  pose(x, y, 'fall')
  player.facing = facing or -1
  camera_snap()
  engine_step(1)
end

-- The lane beside the 30-tile wall: WALLS_WALL30_X is the wall, so its face is
-- at x = WALLS_WALL30_X + 1 and a body flush against it sits D.hw further out.
local WALL30_FLUSH = WALLS_WALL30_X + 1 + D.hw
local WALL30_LANE  = WALLS_WALL30_X + 3.5      -- clear of both walls
-- One tile below the wall's top corner: the ledge grab owns that corner and
-- fires before the slide can start, which is the point of the ordering.
local WALL30_TOP_Y = WALLS_WALKWAY + 1 + D.hh

--[[
  climb_out(target_y, max_frames) -> frames | nil, best_y
  The wall-jump chain a person would use: hold toward the wall you are on,
  press and HOLD jump the moment you touch it (a tapped wall jump only buys the
  0.8-tile apex), release at the apex, hold toward the wall you are flying at,
  repeat. Nothing here pokes the controller.
]]
local function climb_out(target_y, max_frames)
  local want, best = -1, player.y
  for i = 1, max_frames do
    local ws = player.wall_side
    if held['space'] then
      if player.vy >= 0 then key('space', false) end
    elseif ws ~= 0 or on_ground(player) then
      key('space', true)
      if ws ~= 0 then want = -ws end
    end
    key(want > 0 and 'd' or 'a', true)
    key(want > 0 and 'a' or 'd', false)
    engine_step(1)
    if player.y < best then best = player.y end
    if player.y < target_y then return i, best end
  end
  return nil, best
end

--[[ fall_to_floor() -> equivalent height, damage — run a descent out. ]]
local function fall_to_floor()
  step_until(function() return on_ground(player) or player.state == 'dead' end, 600)
  engine_step(2)
  return player.last_land_h, player.last_land_dmg
end

-- ── 12. the slide: entry, the cap, the ramp ────────────────────────────────
line('--- wall slide ---')
wall_pose(WALL30_FLUSH, WALL30_TOP_Y)
key('a', true)
engine_step(2)
check('falling against a wall holding toward it -> slide', player.state, 'slide')
check('  wall side reported', player.wall_side, -1)
release_all()

-- The cap ramps the whole time a slide runs, so "the speed a fresh budget
-- holds you at" is only a fixed number with the budget pinned; lab_slide_freeze
-- does exactly that and nothing else. The natural numbers follow below.
lab_slide_freeze = 0
wall_pose(WALL30_FLUSH, WALL30_TOP_Y)
key('a', true)
engine_step(20)
check('slide speed with the budget pinned fresh (tiles/s)', player.vy, T.wall_slide_cap_start, 0.1)
check('  the cap it settled on', player.slide_cap, T.wall_slide_cap_start, 0.001)
release_all()

lab_slide_freeze = T.wall_slide_budget
wall_pose(WALL30_FLUSH, WALL30_TOP_Y)
key('a', true)
engine_step(60)
check('slide speed with the budget pinned spent (tiles/s)', player.vy, T.terminal_velocity, 0.2)
release_all()
lab_slide_freeze = nil

wall_pose(WALL30_FLUSH, WALL30_TOP_Y)
key('a', true)
local ramp_f = step_until(function() return player.slide_used >= T.wall_slide_budget end, 300)
local ramp_used = player.slide_used
check('after the whole budget is spent, the cap is terminal', player.slide_cap, T.terminal_velocity, 0.2)
check('  and the speed has followed it there', player.vy, T.terminal_velocity, 0.2)
check('  the slide ends when the budget does', player.state, 'fall')
line(string.format('       budget ran out after %d frames (%.3f s of sliding), %.2f tiles down the face',
                   ramp_f, ramp_used, player.y - WALL30_TOP_Y))
release_all()

-- ── 13. leaving and re-entering the slide ──────────────────────────────────
line('--- slide exits ---')
wall_pose(WALL30_FLUSH, WALL30_TOP_Y)
key('a', true)
engine_step(20)
local used_slid, cap_slid = player.slide_used, player.slide_cap
key('a', false)
engine_step(4)
check('releasing the direction leaves the slide', player.state, 'fall')
check('  the spent budget is kept, not refunded', player.slide_used, used_slid, 1e-9)
key('a', true)
engine_step(1)
check('re-pressing re-enters the slide', player.state, 'slide')
check('  the cap resumes where it was, not at the start', player.slide_cap > cap_slid - 0.01, true)
line(string.format('       cap %.3f -> %.3f t/s across the gap (a fresh cap would be %.2f)',
                   cap_slid, player.slide_cap, T.wall_slide_cap_start))
release_all()

wall_pose(WALL30_FLUSH, WALL30_TOP_Y)
key('a', true)
key('s', true)
engine_step(10)
check('holding down against the wall does not slide', player.state ~= 'slide', true)
check('  and spends no budget', player.slide_used, 0, 1e-9)
release_all()

-- ── 14. the wall jump ──────────────────────────────────────────────────────
line('--- wall jump ---')
wall_pose(WALL30_FLUSH, WALL30_TOP_Y)
key('a', true)
engine_step(20)
[...37540 more characters]
3. script tools\snapshot.lua
-- tools/snapshot.lua — one picture of each room for the report.
local held = {}
local function key(n, d) if held[n] ~= d then held[n] = d input_inject_key(n, d) end end
local function release() for k, v in pairs(held) do if v then input_inject_key(k, false) end held[k] = false end engine_step(1) end
local out = {}

debug_on = true

-- calibration: the grab walls and the low corridor in frame
release()
room_load('calibration')
player.x, player.y = 40.5, 11.6
player.vx, player.vy = 0, 0
camera_snap()
engine_step(4)
engine_snapshot('tools/snapshots/calibration.png')
out[#out + 1] = 'tools/snapshots/calibration.png'

-- calibration: the pit row, labelled with their depths
player.x, player.y = 94.5, 11.6
player.vx, player.vy = 0, 0
camera_snap()
engine_step(4)
engine_snapshot('tools/snapshots/calibration-pits.png')
out[#out + 1] = 'tools/snapshots/calibration-pits.png'

-- shaft: the camp the descent starts from
release()
room_load('shaft')
engine_step(6)
engine_snapshot('tools/snapshots/shaft-camp.png')
out[#out + 1] = 'tools/snapshots/shaft-camp.png'

-- shaft: mid-descent, walking right and dropping down the hole
for _ = 1, 1200 do
  if player.state == 'hang' then
    key('d', false) key('s', true) key('space', true)
  elseif on_ground(player) then
    key('s', false) key('space', false) key('d', true)
  else
    key('d', false) key('s', false) key('space', false)
  end
  engine_step(1)
  if player.depth > 40 or player.state == 'dead' then break end
end
release()
engine_step(2)
engine_snapshot('tools/snapshots/shaft-descent.png')
out[#out + 1] = 'tools/snapshots/shaft-descent.png'
local depth, hp, st = player.depth, player.hp, player.state

-- walls: the room as you meet it, on the start platform
release()
room_load('walls')
engine_step(20)
engine_snapshot('tools/snapshots/walls.png')
out[#out + 1] = 'tools/snapshots/walls.png'

-- walls: mid-slide down the 30-tile face, budget half spent, readout on
local function wall_drop(x, y)
  release()
  room_load('walls')
  engine_step(1)
  player.x, player.y = x, y
  player.vx, player.vy = 0, 0
  player.state, player.facing = 'fall', -1
  fall_reset(player)
  player.wall_lock, player.hang_lock, player.buffer, player.coyote = 0, 0, 0, 0
  camera_snap()
  engine_step(1)
end

wall_drop(WALLS_WALL30_X + 1 + D.hw, WALLS_WALKWAY + 1 + D.hh)
key('a', true)
engine_step(36)
engine_snapshot('tools/snapshots/walls-slide.png')
out[#out + 1] = 'tools/snapshots/walls-slide.png'
local slide_used, slide_cap, slide_vy = player.slide_used, player.slide_cap, player.vy

-- walls: the instant of a wall jump out of that slide
key('space', true)
engine_step(1)
key('space', false)
engine_step(1)
engine_snapshot('tools/snapshots/walls-walljump.png')
out[#out + 1] = 'tools/snapshots/walls-walljump.png'
local wj = string.format('slide used %.3f/%.2f s cap %.2f vy %.2f; wall jump vx %.2f force %.3f',
  slide_used, T.wall_slide_budget, slide_cap, slide_vy, player.last_wj_vx, player.force_t)

-- ── the dig game (batch 3) ────────────────────────────────────────────────
local btn = {}
local function mbtn(n, d) if btn[n] ~= d then btn[n] = d input_inject_mouse_button(n, d) end end
local function mrelease() for n, v in pairs(btn) do if v then input_inject_mouse_button(n, false) end btn[n] = false end end
local function aim(tx, ty)
  local sx, sy = camera_to_screen(cam, (tx + 0.5)*TILE_PX, (ty + 0.5)*TILE_PX)
  input_inject_mouse_move(sx, sy)
end

local DIG_SEED = 424242
local seed_was = T.seed

-- the surface at the start, the reach rectangle around the robot
release()
mrelease()
T.seed = DIG_SEED
room_load('game')
engine_step(6)
aim(9, 2)
engine_step(2)
engine_snapshot('tools/snapshots/game-surface.png')
out[#out + 1] = 'tools/snapshots/game-surface.png'

-- mid-dig: a gallery opened, numbers on every exposed face, the progress fill.
-- F1 is off from here down so the game itself is readable.
debug_on = false
room_load('game')
for ty = 8, 10 do for tx = 4, 12 do world_set_air(tx, ty) end end
for ty = 0, 8 do world_set_air(8, ty) end
robot_reset(8.5, 10.6)
camera_snap()
engine_step(2)
aim(10, 11)
engine_step(1)
mbtn(1, true)
for _ = 1, 24 do aim(10, 11) engine_step(1) end
engine_snapshot('tools/snapshots/game-dig.png')
out[#out + 1] = 'tools/snapshots/game-dig.png'
local dig_p = run.dig.p
mbtn(1, false)

-- the moment after a blast: the crater, the sparks, the ring, nuggets falling.
-- (6, 43) is a mine on this seed whose blast radius holds six buried nuggets
-- and two more mines, so one dig opens a crater, chains, and rains loot.
room_load('game')
for ty = 39, 40 do for tx = 3, 12 do world_set_air(tx, ty) end end
robot_reset(8.5, 40.6)
camera_snap()
engine_step(2)
world_detonate(6, 43, 1)
engine_step(10)
engine_snapshot('tools/snapshots/game-blast.png')
out[#out + 1] = 'tools/snapshots/game-blast.png'
local blast = string.format('mines %d blasted %d chain %d nuggets %d fx %d shake %.3f',
  run.stats.mines, run.stats.blasted, run.stats.best_chain, #world.nuggets, #world.fx, world.shake)

-- ── the loop (batch 4) ────────────────────────────────────────────────────
-- One prepared run, walked through the whole chain: the power-down pan, the
-- human at camp with the robot off-screen below, a rope descent, the camp
-- banner, and a death. F1 is off for the three banner shots so the banner is
-- what you see, and on for the two gameplay ones.

local function dig_run()
  release()
  mrelease()
  room_load('game')
  for ty = 0, 26 do world_set_air(8, ty) end
  robot_reset(8.5, -0.4)
  camera_snap()
  for _ = 1, 300 do engine_step(1) if on_ground(robot) then break end end
end

-- 1. the power-down banner with the pan half done
debug_on = false
dig_run()
run.clock = 0.05
for _ = 1, 120 do engine_step(1) if run.state == 'powerdown' then break end end
engine_step(math.floor(T.dig.pan_time*30))        -- half the pan, in frames
engine_snapshot('tools/snapshots/game-powerdown.png')
out[#out + 1] = 'tools/snapshots/game-powerdown.png'
local pan = string.format('state %s t %.2f of %.2f cam_y %.2f robot %dm',
  run.state, run.t, T.dig.pan_time + T.dig.pan_hold, cam_y, math.floor(run.max_depth))

-- 2. the human at camp, the robot off the bottom of the view
debug_on = true
for _ = 1, 300 do engine_step(1) if run.state == 'human' then break end end
engine_step(4)
engine_snapshot('tools/snapshots/game-camp-human.png')
out[#out + 1] = 'tools/snapshots/game-camp-human.png'
local marker = string.format('marker %s %dm at x %.0f, hp %d ropes %d',
  tostring(run.marker_on), math.floor(run.marker_dist), run.marker_x,
  math.floor(player.hp), math.floor(player.ropes))

-- 3. mid-descent on a rope in a dug shaft (F1 off: the rope is the subject)
debug_on = false
for ty = 9, 10 do for tx = 2, 7 do world_set_air(tx, ty) end end
for ty = 9, 24 do world_set_air(8, ty) end
player_reset(7.5, 11 - D.hh)
player.start_y = player.y
player.cam_x_fixed = T.dig.world_w/2
player.facing = 1
camera_snap()
engine_step(3)
key('s', true)
engine_step(2)
key('e', true)
engine_step(1)
key('e', false)
key('s', false)
engine_step(30)
key('d', true) key('w', true)
for _ = 1, 120 do engine_step(1) if player.state == 'rope' then break end end
key('d', false) key('w', false)
key('s', true)
engine_step(30)
key('s', false)
engine_step(2)
engine_snapshot('tools/snapshots/game-rope.png')
out[#out + 1] = 'tools/snapshots/game-rope.png'
local rope_shot = string.format('state %s y %.2f ropes %d rope col %d %d..%d',
  player.state, player.y, math.floor(player.ropes),
  math.floor(ropes[1] and ropes[1].col or -1), math.floor(ropes[1] and ropes[1].top_ty or -1),
  math.floor(ropes[1] and ropes[1].bottom_ty or -1))
release()

-- 4. the camp banner: the human lets go of the rope and reaches the robot
debug_on = false
player.rope = nil
player.state = 'fall'
player.x, player.y = robot.x, robot.y
player.vx, player.vy = 0, 0
engine_step(2)
engine_step(20)
engine_snapshot('tools/snapshots/game-camp.png')
out[#out + 1] = 'tools/snapshots/game-camp.png'
local camp_shot = string.format('state %s cycle %d camp %.1f,%.1f hp %d',
  run.state, math.floor(run.cycle), run.camp.x, run.camp.y, math.floor(player.hp))

-- 5. the death banner: a 30-tile drop down a dug shaft
dig_run()
run.clock = 0.05
for _ = 1, 400 do engine_step(1) if run.state == 'human' then break end end
-- column 4, not the robot's column 8: a drop down the robot's own shaft would
-- make camp on the way past instead of dying
for ty = 0, 40 do world_set_air(4, ty) end
player_reset(4.5, 41 - D.hh - 30)
player.start_y = player.y
player.cam_x_fixed = T.dig.world_w/2
camera_snap()
for _ = 1, 400 do engine_step(1) if run.state == 'dead' then break end end
engine_step(4)
engine_snapshot('tools/snapshots/game-dead.png')
out[#out + 1] = 'tools/snapshots/game-dead.png'
local dead_shot = string.format('state %s reason %s depth %dm falls %d',
  run.state, run.death_reason, math.floor(run.max_depth), math.floor(run.stats.falls))

debug_on = true
mrelease()
release()
T.seed = seed_was
room_load('calibration')
return table.concat(out, '\n'),
       string.format('shaft depth %.1f hp %d state %s', depth, hp, st),
       wj,
       string.format('dig progress %.2f; blast: %s', dig_p, blast),
       table.concat({pan, marker, rope_shot, camp_shot, dead_shot}, '  |  ')
4. room_load("game") engine_step(6) return run.state, run.clock, tostring(debug_on), DIG_HUD_H, width
-> play
44.9
true
34
640
5. 
layer_rectangle(bg_layer, 10, 300, 60, 40, color(255,0,0)())
layer_rectangle(game_layer, 80, 300, 60, 40, color(0,255,0)())
layer_rectangle(effects_layer, 150, 300, 60, 40, color(0,0,255)())
layer_rectangle(overlay_layer, 220, 300, 60, 40, color(255,255,0)())
layer_rectangle(ui_content_layer, 290, 300, 60, 40, color(255,0,255)())
engine_step(1)
engine_snapshot("../probe1.png")
return "ok"
-> ok
6. 
local real_draw = draw
function draw()
  layer_rectangle(bg_layer, 0, 0, width, height, color(20,20,40)())
  layer_rectangle(game_layer, 80, 200, 60, 40, color(0,255,0)())
  layer_rectangle(effects_layer, 160, 200, 60, 40, color(0,0,255)())
  layer_rectangle(ui_content_layer, 240, 200, 60, 40, color(255,0,255)())
  emoji_render()
end
engine_step(1)
engine_snapshot("../probe2.png")
function draw()
  layer_rectangle(bg_layer, 0, 0, width, height, color(20,20,40)())
  layer_rectangle(game_layer, 80, 200, 60, 40, color(0,255,0)())
  layer_rectangle(ui_content_layer, 240, 200, 60, 40, color(255,0,255)())
  layer_render(bg_layer) layer_render(game_layer) layer_render(ui_content_layer)
  layer_draw(bg_layer) layer_draw(game_layer) layer_draw(ui_content_layer)
end
engine_step(1)
engine_snapshot("../probe3.png")
draw = real_draw
return "ok"
-> ok
7. emoji/pipeline.lua
8. engine_reload() return "reloaded"
-> reloaded
9. script tools\snapshot.lua
--[[
  tools/snapshot.lua — one picture of each room for the report.

  Drive it against a live agent instance:

    anchor drive start .
    anchor drive eval  . --file tools/snapshot.lua
    anchor drive stop  .

  It returns the list of files it wrote plus a few measured lines. Every
  capture goes through snap() below, which re-queues the emoji stack's
  composite before engine_snapshot — without that the capture falls back to
  the engine's "draw every layer in creation order", which paints each
  outline over its own layer (see emoji_composite in emoji/pipeline.lua).
]]
local held = {}
local function key(n, d) if held[n] ~= d then held[n] = d input_inject_key(n, d) end end
local function release() for k, v in pairs(held) do if v then input_inject_key(k, false) end held[k] = false end engine_step(1) end
local out = {}

local function snap(name)
  local path = 'tools/snapshots/' .. name .. '.png'
  emoji_composite()
  engine_snapshot(path)
  out[#out + 1] = path
end

debug_on = true

-- calibration: the grab walls and the low corridor in frame
release()
room_load('calibration')
player.x, player.y = 40.5, 11.6
player.vx, player.vy = 0, 0
camera_snap()
engine_step(4)
snap('calibration')

-- calibration: the pit row, labelled with their depths
player.x, player.y = 94.5, 11.6
player.vx, player.vy = 0, 0
camera_snap()
engine_step(4)
snap('calibration-pits')

-- shaft: the camp the descent starts from
release()
room_load('shaft')
engine_step(6)
snap('shaft-camp')

-- shaft: mid-descent, walking right and dropping down the hole
for _ = 1, 1200 do
  if player.state == 'hang' then
    key('d', false) key('s', true) key('space', true)
  elseif on_ground(player) then
    key('s', false) key('space', false) key('d', true)
  else
    key('d', false) key('s', false) key('space', false)
  end
  engine_step(1)
  if player.depth > 40 or player.state == 'dead' then break end
end
release()
engine_step(2)
snap('shaft-descent')
local depth, hp, st = player.depth, player.hp, player.state

-- walls: the room as you meet it, on the start platform
release()
room_load('walls')
engine_step(20)
snap('walls')

-- walls: mid-slide down the 30-tile face, budget half spent, readout on
local function wall_drop(x, y)
  release()
  room_load('walls')
  engine_step(1)
  player.x, player.y = x, y
  player.vx, player.vy = 0, 0
  player.state, player.facing = 'fall', -1
  fall_reset(player)
  player.wall_lock, player.hang_lock, player.buffer, player.coyote = 0, 0, 0, 0
  camera_snap()
  engine_step(1)
end

wall_drop(WALLS_WALL30_X + 1 + D.hw, WALLS_WALKWAY + 1 + D.hh)
key('a', true)
engine_step(36)
snap('walls-slide')
local slide_used, slide_cap, slide_vy = player.slide_used, player.slide_cap, player.vy

-- walls: the instant of a wall jump out of that slide
key('space', true)
engine_step(1)
key('space', false)
engine_step(1)
snap('walls-walljump')
local wj = string.format('slide used %.3f/%.2f s cap %.2f vy %.2f; wall jump vx %.2f force %.3f',
  slide_used, T.wall_slide_budget, slide_cap, slide_vy, player.last_wj_vx, player.force_t)

-- ── the dig game (batch 3) ────────────────────────────────────────────────
local btn = {}
local function mbtn(n, d) if btn[n] ~= d then btn[n] = d input_inject_mouse_button(n, d) end end
local function mrelease() for n, v in pairs(btn) do if v then input_inject_mouse_button(n, false) end btn[n] = false end end
local function aim(tx, ty)
  local sx, sy = camera_to_screen(cam, (tx + 0.5)*TILE_PX, (ty + 0.5)*TILE_PX)
  input_inject_mouse_move(sx, sy)
end

local DIG_SEED = 424242
local seed_was = T.seed

-- the surface at the start, the reach rectangle around the robot
release()
mrelease()
T.seed = DIG_SEED
room_load('game')
engine_step(6)
aim(9, 2)
engine_step(2)
snap('game-surface')

-- mid-dig: a gallery opened, numbers on every exposed face, the progress fill.
-- F1 is off from here down so the game itself is readable.
debug_on = false
room_load('game')
for ty = 8, 10 do for tx = 4, 12 do world_set_air(tx, ty) end end
for ty = 0, 8 do world_set_air(8, ty) end
robot_reset(8.5, 10.6)
camera_snap()
engine_step(2)
aim(10, 11)
engine_step(1)
mbtn(1, true)
for _ = 1, 24 do aim(10, 11) engine_step(1) end
snap('game-dig')
local dig_p = run.dig.p
mbtn(1, false)

-- the moment after a blast: the crater, the sparks, the ring, nuggets falling.
-- (6, 43) is a mine on this seed whose blast radius holds six buried nuggets
-- and two more mines, so one dig opens a crater, chains, and rains loot.
room_load('game')
for ty = 39, 40 do for tx = 3, 12 do world_set_air(tx, ty) end end
robot_reset(8.5, 40.6)
camera_snap()
engine_step(2)
world_detonate(6, 43, 1)
engine_step(10)
snap('game-blast')
local blast = string.format('mines %d blasted %d chain %d nuggets %d fx %d shake %.3f',
  run.stats.mines, run.stats.blasted, run.stats.best_chain, #world.nuggets, #world.fx, world.shake)

-- ── the loop (batch 4) ────────────────────────────────────────────────────
-- One prepared run, walked through the whole chain: the power-down pan, the
-- human at camp with the robot off-screen below, a rope descent, the camp
-- banner, and a death. F1 is off for the three banner shots so the banner is
-- what you see, and on for the two gameplay ones.

local function dig_run()
  release()
  mrelease()
  room_load('game')
  for ty = 0, 26 do world_set_air(8, ty) end
  robot_reset(8.5, -0.4)
  camera_snap()
  for _ = 1, 300 do engine_step(1) if on_ground(robot) then break end end
end

-- 1. the power-down banner with the pan half done
debug_on = false
dig_run()
run.clock = 0.05
for _ = 1, 120 do engine_step(1) if run.state == 'powerdown' then break end end
engine_step(math.floor(T.dig.pan_time*30))        -- half the pan, in frames
snap('game-powerdown')
local pan = string.format('state %s t %.2f of %.2f cam_y %.2f robot %dm',
  run.state, run.t, T.dig.pan_time + T.dig.pan_hold, cam_y, math.floor(run.max_depth))

-- 2. the human at camp, the robot off the bottom of the view
debug_on = true
for _ = 1, 300 do engine_step(1) if run.state == 'human' then break end end
engine_step(4)
snap('game-camp-human')
local marker = string.format('marker %s %dm at x %.0f, hp %d ropes %d',
  tostring(run.marker_on), math.floor(run.marker_dist), run.marker_x,
  math.floor(player.hp), math.floor(player.ropes))

-- 3. mid-descent on a rope in a dug shaft (F1 off: the rope is the subject)
debug_on = false
for ty = 9, 10 do for tx = 2, 7 do world_set_air(tx, ty) end end
for ty = 9, 24 do world_set_air(8, ty) end
player_reset(7.5, 11 - D.hh)
player.start_y = player.y
player.cam_x_fixed = T.dig.world_w/2
player.facing = 1
camera_snap()
engine_step(3)
key('s', true)
engine_step(2)
key('e', true)
engine_step(1)
key('e', false)
key('s', false)
engine_step(30)
key('d', true) key('w', true)
for _ = 1, 120 do engine_step(1) if player.state == 'rope' then break end end
key('d', false) key('w', false)
key('s', true)
engine_step(30)
key('s', false)
engine_step(2)
snap('game-rope')
local rope_shot = string.format('state %s y %.2f ropes %d rope col %d %d..%d',
  player.state, player.y, math.floor(player.ropes),
  math.floor(ropes[1] and ropes[1].col or -1), math.floor(ropes[1] and ropes[1].top_ty or -1),
  math.floor(ropes[1] and ropes[1].bottom_ty or -1))
release()

-- 4. the camp banner: the human lets go of the rope and reaches the robot
debug_on = false
player.rope = nil
player.state = 'fall'
player.x, player.y = robot.x, robot.y
player.vx, player.vy = 0, 0
engine_step(2)
engine_step(20)
snap('game-camp')
local camp_shot = string.format('state %s cycle %d camp %.1f,%.1f hp %d',
  run.state, math.floor(run.cycle), run.camp.x, run.camp.y, math.floor(player.hp))

-- 5. the death banner: a 30-tile drop down a dug shaft
dig_run()
run.clock = 0.05
for _ = 1, 400 do engine_step(1) if run.state == 'human' then break end end
-- column 4, not the robot's column 8: a drop down the robot's own shaft would
-- make camp on the way past instead of dying
for ty = 0, 40 do world_set_air(4, ty) end
player_reset(4.5, 41 - D.hh - 30)
player.start_y = player.y
player.cam_x_fixed = T.dig.world_w/2
camera_snap()
for _ = 1, 400 do engine_step(1) if run.state == 'dead' then break end end
engine_step(4)
snap('game-dead')
local dead_shot = string.format('state %s reason %s depth %dm falls %d',
  run.state, run.death_reason, math.floor(run.max_depth), math.floor(run.stats.falls))

debug_on = true
mrelease()
release()
T.seed = seed_was
room_load('calibration')
return table.concat(out, '\n'),
       string.format('shaft depth %.1f hp %d state %s', depth, hp, st),
       wj,
       string.format('dig progress %.2f; blast: %s', dig_p, blast),
       table.concat({pan, marker, rope_shot, camp_shot, dead_shot}, '  |  ')
10. engine_quit()
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive start . 2>&1 | tail -4...22:04:20Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive start . 2>&1 | tail -4...
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . 'engine_step(4)...22:04:20Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . 'engine_step(4)...
Thinking22:04:28

It booted successfully, so now I want to check the boot output for errors or warnings, but I'm not sure where the drive instance's stdout goes—probably a log file somewhere. Let me check the anchor drive help to find logging options or a replays directory.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive --help 2>&1 | tail -30...22:04:28Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive --help 2>&1 | tail -30...
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive log . -n 60 2>&1 | tai...22:04:28Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive log . -n 60 2>&1 | tai...
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive log . -n 200 2>&1 | gr...22:04:28Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive log . -n 200 2>&1 | gr...

Clean boot. Now the verify suite.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . --file tools/ve...22:05:15Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . --file tools/ve...
Thinking22:05:18

All 216 tests passed with no failures, so no expectation adjustments are needed. Moving on to check the snapshots now.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . --file tools/sn...22:05:31Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . --file tools/sn...

Read (C:\Users\a327e\Desktop\a327ex\emojunky\tools\snapshots\game-surface.png)

Thinking22:05:59

Something seems off with the rendering—the top HUD bar with the depth/clock strip isn't visible, the robot looks like a plain black box instead of properly rendered, and I don't see the reach rectangle or cursor. Yet the debug text in the top-left corner is drawing fine, which suggests the render layers aren't all being drawn in the right order or something's failing silently before the HUD bar gets painted.

I realize I overwrote the old snapshot PNGs, which the brief actually wanted preserved for Fable to do an old-vs-new comparison — that's a problem I need to fix.

I can still recover the originals through git, since they're likely committed or stashed as changes, so I should check `git show HEAD:tools/snapshots/game-surface.png` to pull the old version back.

Meanwhile I'm still puzzling over the missing HUD — checking whether the shadow layer draws before the first outlined layer in a way that could be masking it, then re-examining how the HUD bar color and alpha are actually defined.

Actually, looking at the top of the image again, that text block appears to be the debug readout starting below where the HUD bar should be, so the bar itself with the depth text ought to be rendered separately at the very top — I need to trace through where that draw call actually happens.

I see nothing rendered in that 0-34 pixel band, so `draw_dig_hud` must be silently failing or getting skipped, since composite order between the layers looks correct. This makes me wonder if I'm even looking at the right surface — the help strip that should show at the bottom based on elapsed time is also missing, meaning both of `draw_dig_hud`'s outputs are absent even though `draw_dig_debug` renders fine, despite both targeting the same content layer.

If `draw_dig_hud` threw an error, it's called before `draw_robot_marker` and `draw_dig_debug` in the draw sequence, so those later calls wouldn't even execute — but they clearly did, which is confusing. I can't zoom into the screenshot to double check what I'm seeing, so instead I should pull a fresh diagnostic snapshot and compare it against the last committed one from git.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && mkdir -p /c/Users/a327e/AppData/Loc...22:06:02Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && mkdir -p /c/Users/a327e/AppData/Loc...

Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\old-snaps\game-surface.png)

Thinking22:06:32

Comparing the two screenshots, the old one clearly has the HUD bar, depth readout, clock, help strip, reach rectangle, cursor, and yellow robot, while the new one is missing nearly all the UI elements and the robot appears black instead. Something's broken — the background tiles and debug readout still render in the new version, but it seems like that's the only piece of UI content showing up at all.

I'm noticing the ground surface height and world proportions also look different between the two shots, with the tiles positioned differently and odd horizontal stripes appearing at the edges. There's also a mysterious black box near the top center of the new image that I need to investigate further.

Tracing through the render loop's logic: each layer def checks for shadow/outline flags before drawing, so bg draws plain, then bg_plants gets a shadow stamp (derived from game+effects content offset 4,4) followed by its outline and fill, then game gets its outline and fill, then cover, effects, overlay, and the UI layers in sequence. The shadow is just a gray translucent silhouette of the game+effects layers drawn early, which shouldn't block the game layer's own later draw — so I'm still puzzled why the game layer's content itself isn't appearing, until I realize what's actually happening.

I'm reconsidering whether layer_render properly flushes queued camera_attach/layer_push commands into the FBO, but push/pop looks balanced. I also wonder if world_attach pushing a transform onto empty layers like cover_layer or bg_plants_layer could cause issues, though that seems harmless. Stepping back, I list out what's actually missing from the render: the HUD bar with depth, clock, and help strip, the reach rectangle and cursor on the bg layer, and something involving the robot.

The reach rectangle and cursor both bail early if run.state isn't 'play', while the HUD's clock logic depends on run.state being 'play' or 'camp' — though the HUD bar rectangle itself should draw unconditionally. I'm trying to figure out what state the robot would be in that suppresses all this without also triggering the death/powerdown banner, and I'm starting to suspect there might have been a silent error during draw() that the engine snapshot captured mid-failure — I should check the drive log for a traceback around that frame.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive log . -n 400 2>&1 | gr...22:06:32Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive log . -n 400 2>&1 | gr...
Thinking22:07:04

Since the state is play at clock 44.9, the HUD, reach, and cursor drawing calls should all be firing, yet nothing shows up on screen. I'm wondering if the ui_content layer is being cleared or overdrawn by something else, maybe because ui_begin() isn't being called, or possibly there's an issue with the layer FBO sizing when it's created.

Actually I think I need to check the emoji_render pipeline more carefully — it renders content layers first, then derives outlines by drawing the source directly into the outline target, then composites everything. I should probe this by drawing a big obvious rectangle onto ui_content and snapshotting to see if it actually appears, since I'm second-guessing whether the visible debug text is really coming from the HUD layer or from something else entirely.

Looking at the new snapshot, the text lines match exactly what the debug readout would produce — ten lines starting around y=40 with 13px spacing — confirming it's the debug output rendering fine on ui_content. So the puzzle is why the HUD draw call, which runs earlier on the same layer, isn't showing up at all while the debug draw right after it works perfectly; it's not being covered by anything, and the bar's position and semi-transparent color should make it clearly visible against the sky, so I'm stuck on why it's just not appearing.

But then I notice the color is off — the text looks black/dark navy on blue, not the dim gray it should be if the layer were compositing normally. That's when it clicks: I'm probably seeing the outline layer beneath ui_content, not ui_content itself, meaning ui_content isn't being composited at all and I'm only seeing black outline silhouettes of its contents, which would render text as dark blobs and a semi-transparent rect as a barely-visible thin border — exactly matching what's missing and what's showing.

Testing that theory against the robot and background: the robot appears as a black silhouette too (its own layer's fill missing, outline only), while bg tiles remain fully visible since bg has no outline. But then the reach rectangle and cursor, which also live on bg, should be visible too and aren't — which almost breaks the theory, except DIG_REACH is drawn at very low alpha (24%), so it could simply be too faint to notice rather than actually absent.

I'm wondering if the issue traces back to something breaking right after the first shadow layer draw call, but that doesn't quite fit either since transforms are properly popped.

Let me try a different comparison: bg has no outline and works, while game only shows an outline, and bg_plants/cover are empty. I want to test whether drawing the emoji shadow layer at an offset before bg_plants is somehow disrupting everything drawn after it — I'll set up a quick probe by drawing a bright test rectangle on the game layer to see where the rendering actually breaks.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . ' layer_rectang...22:07:07Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . ' layer_rectang...

Read (C:\Users\a327e\Desktop\a327ex\probe1.png)

Thinking22:07:33

None of the five probe rects show up at all, even the background one—because I queued my probe rect before calling draw(), and draw() immediately overwrites with a full-screen DIG_BG rect drawn afterward, covering it since it comes later in the queue order.

So everything above bg composites away too, confirming the pattern. The likely culprit is something about how empty layers with a queued push but no actual draw calls get processed during layer_render.

I want to test the theory more precisely — maybe check whether commenting out the shadow draw changes things, or compare against knightvspawns, which uses this exact pipeline but with different dimensions and scale.

Another thread: `effect_setup()` installs a custom draw shader, which is the engine-global shader used for all textured draws. If that shader's uniforms are wrong, it could be corrupting layer_draw output — but the background renders fine and it's also a textured draw, so that doesn't quite add up. Then a bigger realization hits: maybe `layer_draw` doesn't render immediately but queues the composite, and something about that queueing is the actual culprit.

I want to check how many layers the engine supports compositing and whether there's a hard limit — I should scan the source for a layer cap, and also cross-check the full log to see whether all the emoji source layers were actually created in the order I expect, since some seem to be created before others contrary to when they should appear.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive log . -n 400 2>&1 | gr...22:07:35Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive log . -n 400 2>&1 | gr...
Thinking22:07:42

Layer count isn't the issue at 23 out of 128. I'm wondering if there's a per-frame draw command buffer limit instead — with the wider 640px view, drawing tiles now generates roughly 2400 commands, plus dashed depth lines add dozens more per row, which could be hitting some cap.

But actually the tiles do render, it's the later layers that fail. So maybe there's a global command capacity being exceeded, causing later layer_draw calls to get dropped silently. I need to check whether layer_draw is queued or immediate, and grep anchor.c for the layer draw queue and its capacity.

Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "MAX_COMMAN...22:07:42Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "MAX_COMMAN...
Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "MAX_COMMAN...22:07:42Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "MAX_COMMAN...
Thinking22:08:00

The command limit per layer isn't the issue and no warning is being printed, so I need to look elsewhere. I'm digging into the C function for layer draw to screen, then checking the emoji_render logic where shadows get drawn per icon definition.

Layer draw pushes the layer's framebuffer to whatever the current render target is, so outside a layer context it lands directly on screen. I'm wondering if layer_draw is actually queued and rendered at frame end, or if it's related to the custom draw shader effect_setup installs globally — since KVP works fine with the same shader setup, that's probably a dead end.

I think the fastest path forward is empirical bisection: manually trigger the render calls and add a probe that draws a rect on ui_content to isolate exactly where the pipeline breaks.

I'll temporarily override draw() with a minimal version that paints simple colored rectangles on each layer plus calls emoji_render, then step the engine and snapshot the result to compare against variations.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . ' local real_dr...22:08:03Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . ' local real_dr...

Read (C:\Users\a327e\Desktop\a327ex\probe2.png)

Thinking22:08:29

Confirmed the background composites correctly, but the game, effects, and ui_content layers only show their derived shadow/outline versions instead of their actual colors — meaning only bg_layer is compositing properly while every layer above it fails, so I need to figure out what's different about bg_layer's setup.

I notice the outline layers get their content via a direct FBO-to-FBO draw, while content layers get theirs through queued commands plus a render call — but that distinction alone doesn't explain why one type shows up and the other doesn't when both should be getting rendered first.

Reconsidering, I wonder if the transform stack matters, but that's balanced in world_attach/detach, and probe2 skipped that call entirely yet game_layer still failed, so that's not it either. Looking at the layer definitions, bg has no flags while game has outline and shadow flags — and I'm tracing how game_layer gets drawn through the shadow and outline shaders into their respective target layers, wondering if that draw call itself is the source of the problem.

I'm now questioning whether the alpha blending is broken rather than the draw call — bg's content is an opaque full-screen rect while game's content is mostly transparent except for a small rect, so if compositing were reading the FBO incorrectly it could explain why one shows up and the other doesn't.

Let me actually trace through `layer_draw_from` and `layer_draw` in anchor.c to see how they read from and composite the source FBO, since the clearing steps I noted only touch the shadow and outline layers, not content.

Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "l_layer_dr...22:08:29Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "l_layer_dr...
Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && sed -n '9276,9360p'...22:08:29Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && sed -n '9276,9360p'...
Thinking22:08:35

I realize layer_draw is actually queued rather than immediate, so I should check layer_queue_draw and the screen composite queue — there might be a cap on how many queued layer draws happen per frame.

Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "layer_queu...22:08:36Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "layer_queu...
Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && sed -n '5840,5885p'...22:08:36Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && sed -n '5840,5885p'...
Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "MAX_LAYER_...22:08:36Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "MAX_LAYER_...
Thinking22:08:55

Ruling out the draw cap, I confirm all 19 draws get queued. So the mystery is why content layers vanish while outline layers, queued identically, render fine—the key difference must be that content layers went through layer_render already this frame while outline layers didn't.

Then it hits me: textures_swapped. If a content layer's textures got swapped by the effect ping-pong system, layer_render writes into layer->fbo but the composite step reads the effect texture instead, making the freshly rendered content invisible. The question now is whether effect_set/effect_clear is somehow being triggered on these content layers even though I don't think we call those functions on them directly.

I should check if there's a "layer_reset_effects" idiom that main.lua might be expected to call, and I want to trace the actual frame-end composite code to see exactly what texture it pulls for each queued layer.

Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && sed -n '23000,23090...22:08:56Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && sed -n '23000,23090...
Thinking22:08:59

Now I want to trace where layer_draw_queue gets consumed and rendered to the screen.

Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "layer_draw...22:08:59Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "layer_draw...
Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && sed -n '21810,21870...22:08:59Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && sed -n '21810,21870...
Thinking22:09:16

The texture swap gets reset after each frame's composite since layer_reset_effects runs afterward, so the ping-pong effect isn't persisting across frames like I thought. That still doesn't explain why the content layers are invisible, so I'm looking back at the blend function being used for the screen effect.

Wait, I should double-check whether the visible background is actually coming from the bg layer or just from the window's clear color — the tiles and sky were visible in that first snapshot, so bg genuinely is rendering. What's special about it is that it's the first layer drawn in the queue, which makes me wonder if only the first queued layer's content actually shows up while subsequent ones don't, even though the outline layer also renders fine.

Looking at probe2's results across all layers, the pattern is clear: bg, shadow, and every outline layer render correctly, but every content layer fails to show. This makes me suspect the order of operations in the render function matters — content layers get rendered first via layer_render, then shadow/outlines get drawn immediately via layer_draw_from, and I need to check whether that function leaves the source layer in a swapped or cleared state that would explain why content never appears.

Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && sed -n '9356,9440p'...22:09:16Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && sed -n '9356,9440p'...
Thinking22:09:35

I'm reconsidering whether the problem is actually the layer FBO dimensions rather than the pipeline—checking if layers were sized 640x360 before the game dimensions were set, and whether window_alpha plays a role.

Since knightvspawns works with identical code, the bug must be in my host code, not the package itself—testing windrang instead of the heavier KVP setup. Looking at the probe image again: two gray-outlined rects (shadow + outline, missing green fill) and one black-only rect for ui_content, which suggests the shadow and outline are rendering but the actual content fill is being dropped somewhere between layer_render and the final composite—possibly in how layer_draw_from binds and never rebinds the framebuffer, or something in l_layer_render's framebuffer binding logic.

I'm now suspecting `textures_swapped` is the culprit: if it's true when layer_get_texture is called, it would return the effect texture instead of what layer_render actually wrote, making the content invisible. I need to trace whether layer_apply_shader or effect_set actually sets that flag on content layers, and whether layer_reset_effects clears it every frame regardless. Rather than keep chasing this logically, I'm going to strip draw() down to the bare minimum—just rectangle, render, and draw calls—to see if the pipeline's extra steps are breaking things, and check probe3 since it already tests almost exactly that scenario.

Read (C:\Users\a327e\Desktop\a327ex\probe3.png)

Thinking22:09:43

Wait, probe3 is identical to probe2, including the blue rect that probe3's draw() never queued, and shows three rects when probe3 only drew two. That means engine_snapshot is capturing the previous frame, not the current one.

But that alone doesn't explain probe2's own missing content, since probe2's snapshot would then reflect the frame before it. I need to check how the composite reset logic and layer_draw_count interact — I should look directly at the engine_snapshot function to see what state it's actually compositing.

Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "l_engine_s...22:09:44Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "l_engine_s...
Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && sed -n '22390,22470...22:09:44Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && sed -n '22390,22470...
Thinking22:10:52

Found it: engine_snapshot reads layer_draw_count after the composite already reset it to 0, so it takes the else branch and draws every layer in registry order instead of respecting the queue order.

Since content layers were created before their outlines, the else branch draws each outline right over its content, and since emoji_shadow was created last it stamps a gray layer on top of everything — matching exactly what I see in the probe: black outlines covering content, gray shadow rects overlaid on top. But I need to reconcile this with outline.frag being a hollow chunky ring derived from 5x5 alpha sampling, not a solid black fill, so I should check what that actually produces for a filled rect.

I'm now checking whether outline.frag outputs a solid dilated silhouette or just the hollow halo, since outline_only.frag exists separately as the hollow-ring variant — that would explain why the black silhouette fully covers the content in registry order, while bg stays untouched since it has no outline or shadow. But then I hit a snag: in game-surface.png the HUD bar's top strip still shows blue sky instead of a black silhouette, which doesn't fit my theory that ui_content_outline draws a solid black rect there.

So I'm reconsidering: maybe outline.frag only produces a thin ring around edges — transparent where alpha>0, black only where a neighbor has alpha but the pixel itself doesn't — leaving the interior of the HUD bar and text glyphs untouched, with the actual content drawn on top afterward.

But that still doesn't explain why the HUD bar is completely absent from the game-surface snapshot; even the emoji shadow layer, being just a gray robot silhouette from the game and effects layers, wouldn't cover it. Looking again at the top of the image, that 34px strip should read as a visibly darker band from the semi-transparent black rect, yet it doesn't appear that way.

Let me test this directly by calling emoji_render() right before the snapshot to see if the queue being non-empty fixes it. But wait, that would re-render layers whose command queues just got cleared, leaving content layers empty—that's worse. What I actually need is a requeue function that redraws this frame's already-rendered FBOs without re-running the render pass, just recompositing them.

But there's a subtlety: since snapshot doesn't reset the draw queue count, doing this requeue means next frame's normal render call would double-queue the same layers, drawing everything twice and darkening semi-transparent blends slightly.

Actually the brief's own suggestion confirms the fix is exactly this re-queue-before-snapshot approach. This makes me reconsider how the old snapshot.lua worked: since PASS 2 already reset the queue after compositing, engine_snapshot's fallback branch would draw all registered layers in order, which back then only meant the two original layers.

The real issue is that this fallback branch only works when registry order happens to match the desired composite order, which breaks with the emoji stack since outlines and shadows need special sequencing. So the actual fix is to give engine_snapshot a properly ordered queue — I'm thinking the cleanest place for this is splitting the pipeline's rendering step so there's a dedicated composite function that can be called independently of full re-rendering, likely added to the pipeline module itself since that's a toolkit file we're allowed to modify.

Writing the composite function...

Finishing composite function...

I'm wiring snapshot.lua to call emoji_composite before capturing, but I need to watch for a double-queue bug: since layer_draw_count doesn't reset after engine_snapshot, the next engine_step's PASS 2 would composite both the stale re-queued layers and the fresh ones, doubling the draw count to 38.

Actually reasoning through it further, the queue does reset after each engine_step's PASS 2, so as long as snapshot.lua always calls engine_step between snapshots, each capture starts fresh at 19 layers -- I'm now verifying that snapshot.lua's sequence of snapshot, then position/camera updates, then engine_step(4) actually maintains that invariant.

One remaining concern is that the extra emoji-composite draws also get recorded into the .apr replay file, doubling that frame's composite in playback -- a minor artifact worth flagging in a comment rather than fixing. I'm considering an alternative approach: triggering the snapshot from inside draw() itself, right after emoji_render(), using a global path variable that draw() checks each frame.

Weighing the trade-offs, though, this approach costs an extra engine step at each snapshot point, subtly shifting animation timing compared to the old snapshots, whereas the double-queue approach preserves exact frame-for-frame timing at the cost of only a hidden extra composite draw. I'm leaning toward keeping the double-queue method since exact timing parity between old and new snapshots matters more, but I still need to trace through whether the doubled queue could bleed into the following snapshot's frame.

Tracing it through, the queue never exceeds 38 out of a 64 capacity across consecutive snapshots and steps, so there's no overflow risk, and the live game window remains unaffected since emoji_render's behavior stays unchanged. I'm settling on using emoji_composite() as the approach.

This same bug would affect any ad hoc use of engine_snapshot, so I should document it as a gotcha in the project's CLAUDE.md. I'm also confirming that the engine's fallback to draw all layers when layer_draw_count is zero doesn't apply here, since our pipeline always calls layer_draw explicitly—so that fallback path is simply irrelevant for our case. Time to implement.

Found it: engine_snapshot composites the frame's layer-draw queue, which PASS 2 empties every frame — so a between-frames snapshot falls back to "every layer in creation order", drawing each outline over its own layer. Let me fix the pipeline and the snapshot tool.

EditC:\Users\a327e\Desktop\a327ex\emojunky\emoji\pipeline.lua22:10:59Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\emoji\pipeline.lua
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky/emoji && sed -n '1,60p' pipeline.lua |...22:10:59Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky/emoji && sed -n '1,60p' pipeline.lua |...

Now the snapshot tool: route every capture through a helper that re-queues the stack first.

EditC:\Users\a327e\Desktop\a327ex\emojunky\tools\snapshot.lua22:11:10Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\tools\snapshot.lua
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && python - <<'EOF' import re, io p = ...22:11:10Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && python - <<'EOF' import re, io p = ...
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor check . 2>&1 | tail -2 && an...22:11:10Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor check . 2>&1 | tail -2 && an...
Thinking22:11:32

There's a game error during step 1 with an empty error message—I need to check the log for the actual details. My guess is that pipeline.lua got reloaded and re-ran a layer creation call for emoji, which could be causing the conflict.

Actually I think I found it: pipeline.lua's top-level code sets emoji_layer_defs to nil, and since it's a tracked file, reloading re-runs that reset, so emoji rendering crashes on the nil value afterward. The fix isn't to patch the code but to just restart the instance instead of reloading it, since this reload-nils-the-defs behavior is a known gotcha in these emoji packages. I'll stop and restart the drive instance now.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive stop . 2>&1 | tail -3 ...22:11:34Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive stop . 2>&1 | tail -3 ...
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . --file tools/sn...22:11:34Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . --file tools/sn...

Read (C:\Users\a327e\Desktop\a327ex\emojunky\tools\snapshots\game-surface.png)

Thinking22:12:02

The HUD bar, depth, clock, and help strip all look correct now, and the UI text shows the family's outlined style as intended. I'm checking though whether the reach rectangle and tile cursor are missing — in the previous version there was a faint white rectangle around the robot and a cursor at tile (9,2), so I'm scanning the image to locate the robot near x=310, y=145 and see if those elements are present.

Read (C:\Users\a327e\Desktop\a327ex\emojunky\tools\snapshots\game-dig.png)

Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\old-snaps\game-dig.png)

Thinking22:12:32

I'm comparing the old and new images—the old one showed a reach rectangle and cursor outline around the robot that seem missing now, though the dug tile still shows its dark progress fill without the white cursor box.

I'm double-checking whether the state gating logic for drawing reach/cursor could be causing this, since both are only supposed to render during 'play' state, which is currently active. Since I split tiles onto a background layer and ropes/nuggets/camp onto a game layer, with reach and cursor also assigned to background, I'm now questioning whether the draw order within that layer split could be hiding them despite being called correctly.

Draw order should actually put reach and cursor on top of the tiles since they're queued last on the background layer, so visibility shouldn't be an issue there — meaning maybe they're rendering but too faint to notice at a glance. I want to directly verify the cursor tile coordinates and whether digging is currently allowed, then grab a zoomed screenshot to check for the outline. I'm also wondering if the aim/targeting calculation that converts camera position to screen coordinates is placing the cursor somewhere unexpected.

Comparing the two screenshots more carefully: in the old image the white cursor outline sits at a separate tile from the dark dig-progress square, near the robot, while in the new image the robot has shifted position and the dark square appears elsewhere — suggesting the actual cursor tile in the new layout corresponds to where dig progress is showing, not a missing white box.

I check the drawing code for the cursor outline, which draws a rectangle border inset slightly within the tile bounds, and that logic looks correct on paper. So I decide to test empirically instead — running the dig scene and probing whether the draw commands for cursor/reach are actually being queued, and temporarily rerouting them to the game layer to see if they render there but not on the background layer, which would narrow down whether the bug is layer-specific.

Then it hits me: the `game` layer has an outline flag enabled, meaning a dilated black silhouette gets drawn beneath the game layer but above the background — though that dilation is too small to explain a hidden reach rectangle. But then I realize the real culprit might be the emoji shadow effect: a gray, semi-transparent offset copy of the game/effects content stamped above the background layer, which could be covering things up wherever the game or effects layers have content.

But the robot's small, so that doesn't fully explain it either. I should stop reasoning theoretically and just probe the live instance directly to see what's actually happening.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . ' T.seed = 4242...22:12:35Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . ' T.seed = 4242...

Read (C:\Users\a327e\Desktop\a327ex\probe4.png)

Thinking22:12:51

Both draw_reach and draw_cursor still aren't rendering anything despite the game being in play state with valid cursor position, so I'm digging into how layer_rectangle_line is used elsewhere in the file to spot what's different about these calls.

The depth-line dashes and carved-out gallery region are both visible on the background layer, confirming bg drawing works fine, and the old code's cursor box also worked by drawing on the game layer rather than bg_layer — so the key difference now is that the new calls target bg_layer instead. That makes me wonder if layer_rectangle_line behaves differently depending on which layer it's targeting.

I want to test this directly by temporarily overriding the draw function to compare drawing a rectangle line on bg_layer versus game_layer side by side.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . ' local real = ...22:12:52Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . ' local real = ...

Read (C:\Users\a327e\Desktop\a327ex\probe5.png)

Thinking22:13:04

I notice the filled rectangle and thick red outline render fine, but the white outline rectangles with thickness 1 are missing in both backgrounds. It seems like thin rectangle_line strokes just aren't rendering while thicker ones do.

Something about the custom shader from effect_setup() might be discarding thin quads or handling alpha 242 differently. I want to test a matrix: thickness 1 opaque vs thickness 1 at alpha 242, thickness 2, a thin filled rectangle, and layer_line, since tile edges and depth dashes at 2px do render fine.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . ' local real = ...22:13:08Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . ' local real = ...

Read (C:\Users\a327e\Desktop\a327ex\probe6.png)

Thinking22:13:20

Looking at the results, it seems the opaque rectangle and low-alpha cases are missing while other line-based elements render fine. This points to something specific about how `layer_rectangle_line` handles thickness that's causing the discrepancy.

I recall the old lab did render thickness-1 rectangle lines fine, so something about the window size change or the custom draw shader must be the culprit—though line and circle outlines at thickness 1 still work, so it's not a blanket ubershader issue. I want to dig into the framework's actual implementation of `layer_rectangle_line` to see what's different.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && grep -n "function layer_rectangle_l...22:13:20Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && grep -n "function layer_rectangle_l...
Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "rectangle_...22:13:20Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "rectangle_...
Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && sed -n '8098,8135p'...22:13:20Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && sed -n '8098,8135p'...
Thinking22:13:36

I'm noting that line_width=1 in layer_add_rectangle indicates an outlined rect rather than a filled one, so I need to trace the rendering path for COMMAND_RECTANGLE when line_width is greater than 0.

Actually, let me reconsider what really changed between the old working code and now — the window width, the custom draw shader, or the layer system. I tested integer positions already and it still failed, so it's not a subpixel rounding issue. I should check whether there's a way to unset the custom draw shader (like set_draw_shader(0)) and test if that's the actual culprit, or just dig into how the engine renders a rectangle outline directly.

Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "layer_add_...22:13:36Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "layer_add_...
Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "case COMMA...22:13:36Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "case COMMA...
Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "static voi...22:13:36Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "static voi...
Thinking22:13:52

This is an SDF quad rendered through the ubershader that effect_setup replaced, so the custom draw_shader.frag must be handling SHAPE_TYPE_RECT with stroke. Since circle_line and layer_line render correctly with that same shader, the rect stroke path must have some subtle difference causing the issue.

I suspect the custom shader's SDF rect stroke uses a smoothstep whose width vanishes at thickness 1 but not 2, which would be a real, latent bug in the toolkit's shader — effect_setup() installs draw_shader.frag which renders 1px rectangle outlines invisibly. I want to check whether knightvspawns ever calls layer_rectangle_line at thickness 1, since if it doesn't, this bug would have stayed hidden there too. Let me compare the engine's default rect-stroke code against draw_shader.frag's stroke handling to confirm.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky/assets && grep -n "stroke\|SHAPE_TYPE_...22:13:52Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky/assets && grep -n "stroke\|SHAPE_TYPE_...
Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "stroke" an...22:13:52Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "stroke" an...
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky/assets && sed -n '780,830p' draw_shade...22:13:52Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky/assets && sed -n '780,830p' draw_shade...
Bashcd /c/Users/a327e/Desktop/a327ex && echo "=== custom shader stroke block ===" &&...22:13:52Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex && echo "=== custom shader stroke block ===" &&...
Thinking22:14:12

I found the actual bug — the engine's default shader has a documented fix for rough mode outline rendering, using max(d, -(d+stroke)) to properly intersect the inset ring instead of excluding both boundary rows. The copied `draw_shader.frag` from knightvspawns predates that fix and still uses the old boundary logic that zeroes out the outline.

This matches our symptom exactly: 1px outlines vanish, 2px+ survive. Since this is under `emojunky/` and not `anchor/`, it's in scope, and leaving it broken would violate the brief's requirement that the game keep looking the same — so I'll port the one-line fix into the stroke block around line 895 and treat this as a documented decision rather than a silent change.

Found the root cause. The copied assets/draw_shader.frag predates an engine fix for 1px outlines in rough mode.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky/assets && grep -n "stroke > 0.0" -B 2 ...22:14:12Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky/assets && grep -n "stroke > 0.0" -B 2 ...
EditC:\Users\a327e\Desktop\a327ex\emojunky\assets\draw_shader.frag22:14:12Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\assets\draw_shader.frag
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive stop . >/dev/null 2>&1...22:14:12Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive stop . >/dev/null 2>&1...

Read (C:\Users\a327e\Desktop\a327ex\probe7.png)

All six render now. Re-running the full verification.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . --file tools/ve...22:15:23Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . --file tools/ve...

Read (C:\Users\a327e\Desktop\a327ex\emojunky\tools\snapshots\game-dig.png)

Thinking22:15:30

I'm checking whether the cursor box and reach rectangle are still visible in the new screenshot, though the reach outline looks very faint. I'll compare a few more snapshots against the older ones, starting with the game-camp-human actors view.

Read (C:\Users\a327e\Desktop\a327ex\emojunky\tools\snapshots\game-camp-human.png)

Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\old-snaps\game-camp-human.png)

Thinking22:15:39

I'm comparing the wider version of the scene, noting the black-outlined UI text and shadowed actors, and trying to pin down the human figure's position relative to the robot's ground coordinates between the two images.

Read (C:\Users\a327e\Desktop\a327ex\emojunky\tools\snapshots\walls.png)

Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\old-snaps\walls.png)

Thinking22:15:47

Good, the player's hitbox outline is now rendering correctly around the green sprite thanks to the shader fix, and the drop shadow looks right. Now I want to check the blast effects, the death banner screen, and the calibration labels on the background.

Read (C:\Users\a327e\Desktop\a327ex\emojunky\tools\snapshots\game-blast.png)

Read (C:\Users\a327e\Desktop\a327ex\emojunky\tools\snapshots\game-dead.png)

Read (C:\Users\a327e\Desktop\a327ex\emojunky\tools\snapshots\calibration.png)

Thinking22:15:58

The scene looks good, wider with outlined actors and shadows against a plain world. I want to spot-check `game-dead` for the full-screen dark banner effect to confirm it matches old behavior, then briefly verify `shaft-descent` and `game-rope` as well.

I should also check whether void space beyond room walls is visible, since that was flagged for reporting — at 640 wide the calibration room's dark background beyond edges matches what existed before, and I'll check the narrow shaft-camp room similarly.

Read (C:\Users\a327e\Desktop\a327ex\emojunky\tools\snapshots\shaft-camp.png)

Thinking22:16:02

I'm checking the shaft room's width against the camera's view range, noting the rock fills on both sides with air pockets showing as black regions, and want to compare this to the earlier shaft-camp screenshot at 480.

Read (C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\old-snaps\shaft-camp.png)

Thinking22:16:11

The shaft's rock fills the sides so there's no void there. I'm now checking whether other rooms like walls, calibration, and calibration-pits show any void beyond their walls compared to the old version.

Actually, rather than eyeballing the screenshots, I should just check tile_solid's out-of-bounds behavior directly in rooms.lua to get an accurate answer.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && grep -n "function tile_solid" -A 15...22:16:12Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && grep -n "function tile_solid" -A 15...
Thinking22:16:22

I'm confirming that the tile solidity checks properly enclose rooms 1-3 with no void gaps, and that room 4's bedrock boundary is correctly drawn outside the dig world's width based on the snapshots.

Now I'm moving to the remaining items: checking what the pipeline clears the page to, whether the lab's background rectangles still cover it, cursor status, docs, and final verification. For the clear color, I need to check whether the engine's compositing pass clears the window to a default color versus relying on the game's own COL_BG/DIG_BG full-screen rectangles to cover everything — I'll grep for the window clear defaults and any background_color init key to confirm.

Bashcd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "window_cle...22:16:23Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/Anchor/engine/engine/src && grep -n "window_cle...
Thinking22:16:30

The page defaults to opaque black, but that never shows because full-screen background rectangles for each room are drawn in screen space before the camera attaches, covering it completely.

Now item 6, the cursor: cursor.lua defines the class and a spawn function but doesn't install itself on require, so nothing calls mouse_set_visible(false) at boot. I need to check the live instance for `the_cursor` and confirm mouse visibility, since there's also no dedicated cursor layer in the stack — enabling it properly requires three separate pieces to line up.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . 'return tostrin...22:16:31Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive eval . 'return tostrin...
Thinking22:16:46

So `the_cursor` is nil, meaning the pointing-hand cursor class exists but isn't actually active—the OS cursor is still showing. Making it work would require adding a cursor layer, binding a click event, spawning it during boot, and wiring up update/draw calls, which is more than a trivial fix, so I should be honest that it doesn't self-install on require.

This creates a tension though: the brief lists "cursor on" as a closed decision, but that's conditioned on self-installation, which isn't happening. Wiring it in would mean adding a layer that the closed layer-stack decision (with its specific names and ordering) doesn't include, since cursor.lua hard-codes its own layer reference—so honoring one closed decision would conflict with another.

Given the packet's instruction to stop and report rather than choose when the brief turns out ambiguous or wrong, the literal reading of the conditional says leave it alone since it doesn't self-install—so I'll do nothing here and flag this conflict clearly for the next pass.

Next I'm looking at PICKER_ROOT, which points outside the project and stays untouched since nothing in the current code path can open the picker or trigger its update function—I'll note that too.

Now I need to write the documentation: the CLAUDE.md and README.md for emojunky, pulling together the controls from main.lua's header, the room structure (calibration, shaft, walls, game), the 216-assertion verification count, and the pass plan.

ccd session: mark_chapter{"title": "Project docs", "summary": "Rewriting emojunky's CLAUDE.md and README from the scaffold stub"}22:16:46Output not recorded
Input
{"title": "Project docs", "summary": "Rewriting emojunky's CLAUDE.md and README from the scaffold stub"}
WriteC:\Users\a327e\Desktop\a327ex\emojunky\.claude\CLAUDE.md22:16:46Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\.claude\CLAUDE.md
WriteC:\Users\a327e\Desktop\a327ex\emojunky\README.md22:16:46Output not recorded
Input
C:\Users\a327e\Desktop\a327ex\emojunky\README.md
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && sed -n '1,60p' main.lua22:16:46Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && sed -n '1,60p' main.lua
Thinking22:17:58

That old line about the human controller is fine as-is, just historical context. Let me trace the verification sequence to confirm order: shader fix applied, then drive restarted so the new instance picks up the shader, then probe7 came back good, and now I'm running the final anchor check and verify pass against the snapshots taken after that restart.

But `anchor check` itself was last run before the recent doc/pipeline/snapshot edits, so I need to rerun it fresh along with a clean verify and snapshot on a new instance, then stop it and check git status/diff. I also need to clean up the probe1-7.png files I left in the workspace root outside emojunky/, and check whether tools/verify-report.txt is tracked in git before deciding what to do with it.

Bashcd /c/Users/a327e/Desktop/a327ex && rm -f probe1.png probe2.png probe3.png probe...22:18:02Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex && rm -f probe1.png probe2.png probe3.png probe...
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive start . 2>&1 | tail -1...22:18:02Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && anchor drive start . 2>&1 | tail -1...
Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && git status --short | head -80 && ec...22:18:02Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && git status --short | head -80 && ec...
Thinking22:19:02

I noticed the verify-report.txt file only changed by two lines, so I want to check that diff to confirm it's just measured values updating. I should also verify the 86 untracked files are just the expected assets and emoji directory, nothing unexpected.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && git diff tools/verify-report.txt | ...22:19:04Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && git diff tools/verify-report.txt | ...
Thinking22:19:18

The verify report only shows a reported marker position change from 252/480 to 332/640, with no assert expectations affected. I want to double-check whether `emoji/` actually appears in the untracked file list, since git might be collapsing directory entries.

Filtering the untracked files confirms everything sits under assets/ or emoji/, which is expected. Counting things out precisely: 64 total files in assets/, minus the pre-existing monogram.ttf, leaves 63 new visible entries (one being the sounds directory), and breaking down the glyphs, plants, fonts, and shaders adds up to exactly 62 new files plus the sounds/.gitkeep placeholder. I've also confirmed the boot output is clean of Lua errors or missing-asset warnings, verified the final .gitkeep exists, and now want to visually recheck the remaining snapshots like game-powerdown and game-rotation.

I've already gone through calibration, shaft-camp, walls, game-surface, game-dig, game-blast, game-camp-human, and game-dead, so I'll take a quick look at game-rope and game-powerdown next to round things out.

Read (C:\Users\a327e\Desktop\a327ex\emojunky\tools\snapshots\game-rope.png)

Read (C:\Users\a327e\Desktop\a327ex\emojunky\tools\snapshots\game-powerdown.png)

Thinking22:19:30

The rope, human figure, rungs, banner, and marker all look good. The "+5s LINE 2" popup on the powerdown screen uses the same black outline as the effects family, which reads a bit heavy but stays consistent with the brief. Now I want to do a final sanity check on the changed view.lua regions to confirm nothing broke.

I've verified main.lua's draw and world_attach usage for rooms 1-3 through snapshots — calibration, shaft, and walls all render fine. Checking the remaining brief items: the debug/hud monogram fonts stay registered and in use with no font changes this batch, and the lab's color constants in view.lua remain untouched. I'll do one more git diff scan on view.lua for accidental damage, plus a grep to confirm no stray layer_text calls for popups and to double-check layer usage counts per function.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && grep -c "bg_layer" view.lua && grep...22:19:31Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && grep -c "bg_layer" view.lua && grep...
Thinking22:19:34

Everything checks out clean - only the monogram fonts are actually in use, while the family's registered fonts remain unused. I also want to note that the assets/sounds/.gitkeep file exists before writing up the report, so let me verify that.

Bashcd /c/Users/a327e/Desktop/a327ex/emojunky && ls -la assets/sounds/ && echo "--- ...22:19:38Output not recorded
Input
cd /c/Users/a327e/Desktop/a327ex/emojunky && ls -la assets/sounds/ && echo "--- ...
WriteC:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\emojunky-infrastructure-report.md22:19:38Output not recorded
Input
C:\Users\a327e\AppData\Local\Temp\claude\C--Users-a327e-Desktop-a327ex\3ceafc7c-84ae-4d02-98bf-741de01c8a2c\scratchpad\emojunky-infrastructure-report.md

emojunky — infrastructure batch: report

1. What changed

The emoji/ package

  • C:/Users/a327e/Desktop/a327ex/emojunky/emoji/ — copied wholesale from ABAgames/knightvspawns/emoji/ (17 files + ui/ with 9 more; 25 .lua files).
  • emoji/sounds.lua — dropped sounds.ball_wall = sound_load('assets/ball_wall.ogg') (its one test clip) and emptied volumes; the bank now boots with nothing declared and nothing loaded.
  • emoji/sound_tuning.lua — emptied the return table (118 DSP rows keyed by Horse Game's own filenames); header kept.
  • emoji/volume_tuning.lua — emptied the return table (Horse Game's volumes); header kept.
  • emoji/pipeline.lua — split step 4 of emoji_render out as a new emoji_composite(), which re-queues the stack's draws from the layers' current FBOs; emoji_render now calls it.

Assets (C:/Users/a327e/Desktop/a327ex/emojunky/assets/)

  • 62 files copied from ABAgames/knightvspawns/assets/: 8 starter images, the 38-file glyph set (0–9, a–z, plus, minus), 5 plant sprites, hit1.png, dizzy.png, 3 fonts, 6 shaders. Nothing was missing there; the windrang fallback was not needed. No sound bank. monogram.ttf kept.
  • assets/sounds/.gitkeep — empty directory created.
  • assets/draw_shader.frag — ported the engine's rough-mode 1px-stroke fix into the stroke > 0.0 block. See §2.

main.lua — header rewritten (names emojunky, the two-stage loop, the pass plan, the file map with emoji/ and tools/snapshot.lua, anchor drive lines corrected to .); init table width = 640, title = 'emojunky'; added gw, gh = width, height and require('emoji') right after the anchor init, before TILE_PX; draw() fills bg_layer, brackets with world_attach()/world_detach(), and ends with one emoji_render() instead of the four layer_render/layer_draw calls.

boot.lua — the game_layer/ui_layer pair replaced by emoji_layers({...}) in WINDRANG's order, names and flags, with a comment saying what each layer holds; added WORLD_LAYERS = { bg_layer, bg_plants_layer, game_layer, cover_layer, effects_layer } and main_camera = cam; boot print says emojunky:.

view.lua — header rewritten as the layer map, and every draw re-routed:

  • bg_layer: draw_tiles, draw_labels, draw_dig_sky, draw_dig_tiles, draw_depth_lines, draw_reach, draw_cursor, and game_draw's DIG_BG backdrop.
  • game_layer (same name, now outlined + shadowed): draw_ropes, draw_player, draw_nuggets, draw_robot, draw_dig_camp, draw_dig_human.
  • effects_layer: draw_dig_fx, draw_dig_popups, plus the two floating-text blocks lifted out of draw_player and draw_dig_human.
  • ui_content_layer: draw_hud, draw_debug, draw_robot_marker, draw_dig_hud, draw_dig_debug.
  • dig_nugget(px, py, s) → dig_nugget(lyr, px, py, s); the buried-tile hint passes bg_layer, the loose nugget game_layer.
  • New world_attach(sx, sy) / world_detach(); game_draw uses them.

tools/snapshot.lua — header added; new snap(name) helper calls emoji_composite() then engine_snapshot(...); all 15 call sites collapsed into it. No pose, step count, seed or ordering changed.

Docs — .claude/CLAUDE.md rewritten from the scaffold stub (the game, read-first, file map, rooms + controls, the emoji/ package and its two deliberate divergences, the layer-stack table, what the page clears to, assets/fonts, three gotchas, the commands with expected numbers, the four passes, working rules); README.md rewritten.

Not touched: controller.lua, game.lua, robot.lua, world.lua, rooms.lua, tuning.lua, tools/verify.lua, tools/measure_walk.lua, run.bat, anchor/.

2. Decisions I made on my own

  1. Ported the engine's 1px-stroke fix into assets/draw_shader.frag. effect_setup() installs that shader over the engine default, and knightvspawns' copy predates the engine's rough-mode fix: abs(d) - stroke*0.5 puts the ring's edges exactly on pixel centres and step(0.0, d) then excludes both rows, so in a filter = 'rough' game every layer_rectangle_line(..., 1) renders zero pixels — which silently deleted the dig cursor, the reach rectangle and every hitbox outline. anchor.c's own shader uses max(d, -(d + stroke)) in rough mode (with the explanation in its comments); I copied that branch with an attribution comment. No engine or framework file touched — this is the game's own asset.
  2. Put emoji_composite() in emoji/pipeline.lua rather than open-coding the re-queue in snapshot.lua: it is the pipeline's own knowledge, every emoji game's agent snapshots need it, and emoji_render now uses it so there is one composite order, not two.
  3. Camera binding is host-side, as WINDRANG does it — the pipeline takes no position on cameras. world_attach pushes the shake offset and camera_attach(cam, l) onto each of WORLD_LAYERS up front; draw functions then queue into any of them in any order, because layers hold independent command queues. UI layers are simply not in the list.
  4. All five world layers get the camera, not just the three in use, so bg_plants and cover are ready for later passes.
  5. Floating text → effects (the fall-damage and notice strings above an actor moved off the actor's layer).
  6. The camp tent → game. Not in the brief's list; it is a discrete object rather than terrain, so it takes the outline and shadow.
  7. main_camera = cam so emoji/fx.lua's damage numbers ride the camera when first used. Nil-guarded there, so this is a default, not a fix.
  8. Emptied the two sound tuning tables instead of deleting the files — both are auto-written by the F3 tool and required by name, so they must exist.
  9. Dropped sounds.ball_wall rather than copying one .ogg: one test clip the owner did not pick is still a sound he did not pick.
  10. Left the dev overlays loaded but unwired — GAME_HOSTED is nil so they load, but nothing binds their keys or calls their _update functions.

3. What was verified, and how

From C:/Users/a327e/Desktop/a327ex/emojunky/, on a fresh agent instance, after every change:

anchor check .
  anchor check: 0 error(s), 58 warning(s), 0 info, 0 hint(s)

anchor drive start .
anchor drive eval . --file tools/verify.lua
  verify: 216 passed, 0 failed

anchor drive eval . --file tools/snapshot.lua
  15 files written to tools/snapshots/ (all names unchanged)

anchor drive log .   → no error, warning, missing-asset, nil-value or traceback line
anchor drive stop .

No verify expectation was adjusted. The window's height did not move, and every width-derived expression in the suite (camp_cam_y, the marker, camera_to_screen) is computed from width/height rather than hard-coded. The only changed line in tools/verify-report.txt is a reported measurement, not an assert: marker x 252 px of 480 → marker x 332 px of 640.

The 58 warnings are all in the copied package — 57 in emoji/sound_tuner.lua (FXLAB, fx_import_entry, fx_moment_gain, fx_all_sounds, FX_TRIGGERS, …, knightvspawns' F7 lab globals) and 1 in emoji/ui/init.lua (UI_TIERS); all inside overlay code that never runs here. That is the new baseline.

I compared every snapshot against the old one (recovered with git show HEAD:). Same scenes, wider, same content: actors carry the black outline and the (4,4) drop shadow, the world is plain, the UI text carries the outline. The dig cursor, the reach box and the hitbox outlines are present — they were the casualties of the shader bug, which is how it was found.

git status --short      → 22 modified, 64 untracked (all under assets/ or emoji/)
git diff --stat
 .claude/CLAUDE.md                    | 208 +++++++++++++++++++++++++++++++----
 README.md                            |  34 ++++++
 boot.lua                             |  59 ++++++++--
 main.lua                             |  68 ++++++++----
 tools/snapshot.lua                   |  68 ++++++------
 tools/snapshots/*.png (15 files)     | Bin
 tools/verify-report.txt              |   2 +-
 view.lua                             | 208 +++++++++++++++++++++--------------
 22 files changed, 483 insertions(+), 164 deletions(-)

Nothing committed, nothing pushed, the game never run interactively.

4. What I stopped on

emoji/cursor.lua does not install itself on require, so the cursor is OFF — and turning it on collides with the closed layer-stack decision. Item 6 was conditional, and the condition is false: cursor.lua only defines the class and spawn_cursor(). Verified live — the_cursor is nil, the OS cursor is still visible. Its host contract needs three things the closed decisions do not provide: a cursor layer in emoji_layers (WINDRANG's stack has none, and cursor:draw hard-codes cursor_layer), bind('click', 'mouse:1'), and spawn_cursor() in boot plus the_cursor:update(dt) at the end of update and the_cursor:draw() in draw. So "cursor on" and "WINDRANG's layer names/order" cannot both hold. I left it as the toolkit ships it and did not add a layer. Your call for the next pass; once on, the off switch is one line — delete the spawn_cursor() call.

emoji/sound_picker.lua wants a path outside the project. PICKER_ROOT defaults to %USERPROFILE%/Desktop/sound packs (verified live: C:/Users/a327e/Desktop/sound packs; on Linux ~/sound packs). I did not point it anywhere. It is inert as it stands: the default is only a string at require time, and the dir /s /b walk happens lazily in sound_picker_build_index(), which runs only when the picker is opened — and nothing here can open it. If you ever want it, it expects a library of .wav/.ogg/.mp3/.flac under that folder.

Both are reported, not resolved. Nothing else stopped the batch.

5. Noticed and left alone

  • The 640-wide view shows more bedrock in room 4. The dig world is 16 tiles wide and the camera pins to world_w/2, so ~5.3 tiles of DIG_BEDROCK down each side instead of ~2. No void anywhere: world_bedrock is true outside the columns and tile_solid returns true outside rooms 1–3's bounds. Not ugly, but the dig world reads narrower than it did — worth a look at the tile pass.
  • Reloading emoji/pipeline.lua breaks a running instance: its top level sets emoji_layer_defs = nil, so engine_reload() after editing it leaves emoji_render composing nothing. Restart instead. Documented in the project CLAUDE.md; the same trap exists in knightvspawns.
  • emoji/sound_tuner.lua's Horse Game coupling (57 of the 58 warnings) — every read is inside overlay code this game cannot reach, and cutting them would be a real edit to a file you will want to re-port cleanly later.
  • emoji/transition.lua needs a transition_layer that WINDRANG's stack does not declare — the same shape as the cursor problem. Inert because transition_update is never called.
  • emoji/init.lua loads 47 textures and 3 fonts at boot that nothing draws yet — the starter set arriving ahead of the passes that use it, as intended, but it is why boot now prints 47 Loaded texture lines.
  • The engine's engine_snapshot fallback is a trap for any multi-layer game: with an empty layer-draw queue it composites layer_registry in creation order, which for any outline pipeline draws each outline over its own layer. The lab's old two-layer stack happened to have registry order == composite order, which is why it never bit before. Worth a line in docs/AGENT.md if you want it fixed at the source.
  • tools/measure_walk.lua was not exercised (nothing in it touches layers).

The report is also at C:/Users/a327e/AppData/Local/Temp/claude/C--Users-a327e-Desktop-a327ex/3ceafc7c-84ae-4d02-98bf-741de01c8a2c/scratchpad/emojunky-infrastructure-report.md.

Back to Delve Deep, My Unstoppable Machine!!! 1

Settings