Extract WINDRANG hop player mechanics

Delegated run·Sep 13, 2026  21:55·Prompted by Fable·Run by Sonnet 5Sonnet 5 high
Ctrl + F
Show

Transcript

Fable·21:55:27·Sep 13, 2026Prompter

Read-only. Report conclusions with file:line cites, under ~1500 words. Do not touch C:/Users/a327e/Desktop/a327ex/emojunky/ at all (another agent is editing it).

Read C:/Users/a327e/Desktop/a327ex/ABAgames/windrang/main.lua in full (the player is around lines 270-560; constants at the top) and skim C:/Users/a327e/Desktop/a327ex/ABAgames/windrang/.claude/CLAUDE.md for any player/hop notes. Then explain, for someone who will re-create this player on a DIFFERENT controller (a kinematic tile controller in tiles/seconds at 120 Hz, no Box2D):

  1. The hop-walk mechanism exactly: what happens per frame when A/D is held on the ground (is every step a hop? hop velocity, cadence, how it interacts with slopes, the max horizontal speed, acceleration/friction), the jump (JUMP_VY, cut rules JUMP_CUT_TRAVEL/JUMP_CUT_VY, hold behaviour), gravity, hard landing threshold and what a hard landing does, the dizzy state (what triggers it, duration, what it changes). Give every constant with its value and units (pixels/second; note the game is 640x360 at scale 2).
  2. How the player is DRAWN: which image (slight_smile / dizzy), draw size in pixels, facing flip, tilt/rotation rules, squash-and-stretch springs (which juice.lua functions, with what parameters), landing dust / hop particles (fx.lua calls), which layer it draws on, and the collider shape/radius.
  3. Every sound hooked to the player (name, when it plays, volume) — the owner will re-pick sounds but the hook points matter.
  4. What ToTeMoJi-derived body proportions or offsets exist (e.g. where the feet are relative to the image center, how it sits on the terrain lip).
  5. Anything in the hop controller that is specific to the polyline terrain (slope solving, terrain_angle) versus what transfers to a flat tile floor.

Organize by those numbers.

Sonnet 5high·21:55:31·Sep 13, 2026Worked for 2m 5s
Thinking21:55:31

Let me go read those files now.

ReadC:/Users/a327e/Desktop/a327ex/ABAgames/windrang/.claude/CLAUDE.md21:55:31Output not recorded
Input
C:/Users/a327e/Desktop/a327ex/ABAgames/windrang/.claude/CLAUDE.md
ReadC:/Users/a327e/Desktop/a327ex/ABAgames/windrang/main.lua21:55:31Output not recorded
Input
C:/Users/a327e/Desktop/a327ex/ABAgames/windrang/main.lua
Thinking21:55:34

That path doesn't have a CLAUDE.md file, so I'll check the .claude directory instead.

Bashls -la "C:/Users/a327e/Desktop/a327ex/ABAgames/windrang/.claude/" 2>&1; find "C:...21:55:34Output not recorded
Input
ls -la "C:/Users/a327e/Desktop/a327ex/ABAgames/windrang/.claude/" 2>&1; find "C:...
Grepspring_pull|squash_x|squash_y|spring_update|spring_new|hitfx_init21:55:34Output not recorded
Input
spring_pull|squash_x|squash_y|spring_update|spring_new|hitfx_init
Thinking21:55:43

There's no CLAUDE.md, so I'll note its absence and move on. I want to check hitfx_init, spring definitions, and the juice.lua functions for spring_pull and spring_update, plus fx.lua for landing dust particles, emoji.lua for image handling, and related layers and sounds. I also want to trace where dizzy_until gets set across the codebase, since I noticed it's initialized in main.lua.

Grepdizzy_until|hitfx_init|slight_smile|DUST_TERRAIN_MIX|hop.*dust|dust.*hop21:55:43Output not recorded
Input
dizzy_until|hitfx_init|slight_smile|DUST_TERRAIN_MIX|hop.*dust|dust.*hop
Grepfunction hitfx_init|function spring_pull|function spring_update|function spring_new21:55:43Output not recorded
Input
function hitfx_init|function spring_pull|function spring_update|function spring_new
Thinking21:55:49

I notice dizzy_until is set to -1 and never updated anywhere else in this file, so the dizzy state may not actually be implemented in this slice yet. I should check other files like hurt.lua or look at CLAUDE.md/git history to see if it's planned but not coded.

Grepdizzy|HARD_LAND21:55:49Output not recorded
Input
dizzy|HARD_LAND
ReadC:/Users/a327e/Desktop/a327ex/ABAgames/windrang/emoji/juice.lua21:55:49Output not recorded
Input
C:/Users/a327e/Desktop/a327ex/ABAgames/windrang/emoji/juice.lua
ReadC:/Users/a327e/Desktop/a327ex/ABAgames/windrang/anchor/spring.lua21:55:49Output not recorded
Input
C:/Users/a327e/Desktop/a327ex/ABAgames/windrang/anchor/spring.lua
Thinking21:55:57

Confirmed dizzy is never triggered since dizzy_until stays at -1 permanently. Also checking HARD_LAND_VY, it seems only declared but never actually referenced anywhere else in main.lua—so it's unused too. I want to verify this with a grep count.

Next I should look at plants_apply_moving and fx.lua for landing dust particle spawns, and track down where the grass_land and land_impact sounds actually get played, since they're declared but I haven't confirmed their usage sites yet.

GrepHARD_LAND_VY|grass_land|land_impact|sounds\.hop21:55:57Output not recorded
Input
HARD_LAND_VY|grass_land|land_impact|sounds\.hop
Grepfunction sfx|function sound_declare21:55:57Output not recorded
Input
function sfx|function sound_declare
Thinking21:56:05

I confirm the grass_land sounds and HARD_LAND_VY constant are declared but never actually called anywhere in main.lua — they're unused hooks reserved for hard-landing feedback that isn't wired up yet in this slice.

Now I want to check whether fx.lua has any dust/particle spawning tied to landing or hopping, since I didn't spot any fx calls in the hop/landing code in main.lua either.

Grepdust|fx_new|spawn_.*dust|fxs\[21:56:05Output not recorded
Input
dust|fx_new|spawn_.*dust|fxs\[
Grepfunction.*dust|DUST21:56:05Output not recorded
Input
function.*dust|DUST
Thinking21:56:10

I notice spawn_landing_dust is defined in fx.lua but never called from main.lua for windrang. I should check that function's parameters and search the repo for where DUST_TERRAIN_MIX actually gets used, since it's declared but its usage isn't obvious yet.

ReadC:/Users/a327e/Desktop/a327ex/ABAgames/windrang/emoji/fx.lua21:56:10Output not recorded
Input
C:/Users/a327e/Desktop/a327ex/ABAgames/windrang/emoji/fx.lua
GrepDUST_TERRAIN_MIX21:56:10Output not recorded
Input
DUST_TERRAIN_MIX
Thinking21:56:21

I confirm spawn_landing_dust exists in fx.lua as a reusable dust-puff effect but isn't actually invoked anywhere in windrang's main.lua, and DUST_TERRAIN_MIX = 0.5 sits unused too, presumably meant for blending dust color based on terrain type.

Now I want to double-check the collider shape (circle, radius PLAYER_RADIUS=10.5) and how emoji drawing scales work — the draw size normalizes to a 22px baseline regardless of native image width, then applies hit-spring and squash factors on top. I should also confirm the actual pixel dimensions of the slight_smile and dizzy emoji assets to make sure the scaling math holds up.

Bashcd "C:/Users/a327e/Desktop/a327ex/ABAgames/windrang" && python3 -c " from PIL im...21:56:21Output not recorded
Input
cd "C:/Users/a327e/Desktop/a327ex/ABAgames/windrang" && python3 -c " from PIL im...
Grepfunction collider|function raycast_entity|'circle'21:56:21Output not recorded
Input
function collider|function raycast_entity|'circle'

Image size check isn't essential — the draw code normalizes size explicitly (see below), so I'll skip pixel-probing the PNGs. That's enough digging. Here's the report.

1. Hop-walk mechanism, jump, gravity, hard landing, dizzy

Constants (main.lua:23-48, px/s, px/s², seconds; game is 640×360 logical, scale 2 — these numbers are logical-pixel units, unaffected by the 2x scale):

  • MOVE_MAX_V = 128 — hop travel speed (px/s) while a hop is in flight.
  • HOP_VY = -90 — vertical launch velocity of a hop (px/s, up).
  • JUMP_VY = -300 — vertical launch velocity of a full jump.
  • JUMP_CUT_TRAVEL = 34 — px of upward travel required before a jump-cut can fire.
  • JUMP_CUT_VY = -65 — velocity jump is clamped to when cut.
  • GRAVITY_Y = 685 — px/s².
  • HARD_LAND_VY = 200 — declared but unused: grep of main.lua shows no reference to it outside its own declaration. The grass_land1/2/3 and land_impact sounds are likewise declared/volumed (main.lua:95-104) but never triggered by sfx(...) anywhere in the file. Hard landing is not implemented in this slice (file header: "no stack, no hurt" — slice 2 is walk/jump only).
  • HOP_T = 2*(-HOP_VY)/GRAVITY_Y — derived hang time of one hop (≈0.263s), i.e. symmetric projectile time-of-flight for launch speed -HOP_VY.
  • HOP_L = MOVE_MAX_V*HOP_T — derived flat-ground hop length (≈33.7px).
  • HOP_MAX_GRADE = tan(50°) — max dy/dx a hop's vertical landing offset is clamped to.
  • HOP_DOWNHILL = 0.4 — extra hang-time factor applied when hopping downhill.
  • PLAYER_RADIUS = 10.5 — collider radius, also used to place hop rays.

Per-frame ground hop-walk (update_hop, main.lua:460-534): every hop key transition is a discrete "hop", not continuous walking. While A/D is held and the player is grounded, not jumping/bouncing, and can_jump is true, each frame do_hop(dir) is invoked — but do_hop only actually re-fires when the previous hop has ended (grounded, vy>=-10, time-hop_launch_t>0.09, set at main.lua:374-380, which resets movement_jump=true/hop_active=false). So functionally it's "land → immediately re-hop while key held → land → re-hop," i.e. every step on the ground is a hop, chained back-to-back with no flat-run state.

do_hop(dir) (main.lua:332-354):

  1. Uses terrain_walk(x, dir, HOP_L) to find where the hop would land if walking HOP_L px along the polyline surface from the current x (this is arc-length-along-slope, not straight horizontal distance — see §5).
  2. Computes dy = terrain_height(land_x) - terrain_height(x). If landing is downhill (dy>0) and dx>1, it recomputes with an inflated hang time T = HOP_T*(1+HOP_DOWNHILL*min(dy/dx,1)) and re-walks HOP_L*k — longer air time so a downhill hop still reaches its intended horizontal target instead of slamming into the slope early.
  3. Clamps dy to ±dx*HOP_MAX_GRADE (i.e. slopes above 50° are not solved for; over-steep terrain is clamped rather than let the arc misbehave).
  4. Sets self.speed = dx/T (this becomes the constant horizontal velocity for the whole hop, NOT MOVE_MAX_V verbatim — it's dx actually walked divided by (possibly inflated) T) and returns the needed vertical launch velocity dy/T - GRAVITY_Y*T/2 (the closed-form initial vy so a vy0 t + ½ g t² arc under constant gravity lands exactly at dy after time T).
  5. Triggers squash-and-stretch and the hop sound (sfx(sounds.hop, volumes.hop), volume 0.15).

While a hop is airborne (hop_active), holding the same direction just keeps self.speed/self.direction fixed (no continuous acceleration model — hop is a ballistic step, not a spring-to-target velocity like the alternate "roll" mode). Releasing both left/right while grounded zeros speed and clears hop_active (main.lua:485-492); releasing while airborne and not jumping/bouncing zeroes vy if it's still negative (main.lua:493-496) — cuts a hop's remaining rise short the instant you let go, mirroring the jump-cut behavior.

There is no acceleration/friction curve for hop-walk — horizontal speed is set once per hop to dx/T and held constant for that hop's duration; MOVE_MAX_V (128) is only used as the flat-ground target for terrain_walk's initial HOP_L computation and as the immediate speed set in the "already hopping, still holding direction" branch (main.lua:471,482) which is effectively unreachable given hops always end with speed reset to 0 mid-flight — in practice this branch fires for the same-frame the direction key is first read but movement is still on the ground before an actual hop condition triggers, so speed briefly becomes MOVE_MAX_V before do_hop takes over on the next hop cycle. Net effect for a flat floor re-implementation: max horizontal speed a hop ever produces is MOVE_MAX_V = 128 px/s (when dy≈0), rising above that on downhill hops because dx still spans HOP_L*k over the same nominal T before the k inflation is applied to T itself (both dx and T scale by k, so dx/T stays ≈MOVE_MAX_V; downhill hops don't get faster horizontally, they get longer/floatier).

Jump (main.lua:498-516): pressing jump while can_jump sets vy = JUMP_VY (-300 px/s), flags jumping=true, can_jump=false, clears hop_active, and pulls squash springs. While jumping and the key is released, if vy<0 (still rising) and abs(y - jump_y) > JUMP_CUT_TRAVEL (34px risen), vy is snapped to JUMP_CUT_VY (-65) and jumping=false — a variable-height jump with a minimum rise floor before the cut can apply (holding past that point does nothing extra; only releasing early cuts it). Landing (grounded, vy>=-10, and hop-cooldown elapsed) clears jumping/bouncing/can_jump→true.

Gravity: GRAVITY_Y=685 applies via collider:set_gravity_scale(1), except a "resting" special case (main.lua:522-525): if grounded, speed==0, jump not held, and 0<=vy<30, gravity_scale is set to 0 and vy forced to 0 — this suppresses residual micro-bounce/gravity creep while idly standing on the polyline (since the chain collider isn't a flat floor, without this the circle would visibly settle/jitter). On a flat tile floor this resting-lock is likely unnecessary but harmless.

Dizzy state: main.lua:304 initializes self.dizzy_until = -1, and draw() (main.lua:537) reads time < self.dizzy_until to pick dizzy_img over slight_smile. Nothing in the file ever advances dizzy_until above -1 — no hard-landing check, no other trigger exists in windrang. The dizzy state is scaffolded (image loaded, field present, draw branch present) but not wired to any trigger, duration, or gameplay effect in this slice. There is no CLAUDE.md at windrang/.claude/ (that directory doesn't exist), so no additional design notes were found to fill this gap — treat dizzy as "reserved hook, not yet implemented" when re-creating.

2. Drawing

player:draw() (main.lua:536-545):

  • Image: dizzy_img if time < dizzy_until (currently dead code, see §1) else slight_smile (loaded at emoji/init.lua:39 from assets/slight_smile.png; dizzy from assets/dizzy.png, main.lua:93).
  • Size: s = (22/img.width) * spring.hit.x — draws at a fixed 22px logical width (before squash), regardless of the source PNG's native resolution, scaled further by the ambient "hit" spring (idle value 1.0, from hitfx_init).
  • Squash: final sx = s*squash_x.x, sy = s*squash_y.x — independent horizontal/vertical multipliers layered on top of the base 22px scale.
  • Facing flip: none implemented — there's no sign flip on sx for direction; the sprite doesn't mirror when moving left vs right in this slice.
  • Rotation: r = visual_r in hop mode (roll mode uses the physics collider's own angle instead). visual_r accumulates only while jumping or bouncing (main.lua:518-520): visual_r += direction*4π*dt (a full spin every 0.5s at that dir), i.e. hop-walking on the ground never rotates the sprite; only during jump/bounce airtime. On landing after airtime>0.04s, if in hop mode a 0.05s tween snaps visual_r to the nearest multiple of 2π then zeroes it (main.lua:386-390), so the flip always resolves to upright.
  • Squash-and-stretch springs (anchor/spring.lua, emoji/juice.lua): hitfx_init(self) (main.lua:280) attaches hit (freq 3, bounce 0.7, base 1), squash_x/squash_y (freq 3, bounce 0.5, base 1) via spring_add. Calls that pull them:
    • Hop launch (do_hop, main.lua:350-351): spring_pull(spring,'squash_x', -0.07, 6, 0.45), spring_pull(spring,'squash_y', 0.11, 6, 0.45).
    • Jump launch, both hop-mode (main.lua:506-507) and roll-mode (main.lua:449-450): squash_x -0.14, squash_y 0.22, freq 6, bounce 0.45.
    • Landing impact (main.lua:382-391, fires for any mode when grounded transitions from airborne with air_t>0.04): impact = clamp(max(vy,last_vy), 0, 1400); squash_x += remap(impact,0,1400,0,1)*SQUASH, squash_y += remap(impact,0,1400,-0.2,0)*SQUASH, freq 6, bounce 0.35, where SQUASH=1.2.
  • Landing dust / hop particles: spawn_landing_dust(x,y) exists in emoji/fx.lua:412-420 (two 💨 puffs from x±8, velocity 30-50 px/s, near-horizontal ±π/24, duration 0.7s, scale 0.9) but is never called from windrang/main.lua — no dust or particle fx is currently hooked to hop or landing. DUST_TERRAIN_MIX=0.5 (main.lua:39) is likewise declared but unreferenced anywhere in the repo besides its declaration — reserved for a future terrain-tinted dust color, not wired.
  • Draw layer: game_layer (main.lua:542-544, inside camera_attach(main_camera, game_layer) in draw(), main.lua:689-692). Layer stack order from emoji_layers (main.lua:77-88): bg → bg_plants → game → cover → effects → overlay → ui_*.
  • Collider: circle, radius PLAYER_RADIUS = 10.5 px (main.lua:281), tag 'player', dynamic body colliding with tag 'solid'.

3. Sounds hooked to the player

  • hop (assets/sounds/hop.ogg) — plays on every do_hop() call (main.lua:352), volume 0.15. This is the only sound currently firing from player code.
  • grass_land1, grass_land2, grass_land3 (volume 0.35 each) and land_impact (volume 0.4) are declared and volume-tuned (main.lua:95-104) but not called anywhere in main.lua — presumably reserved for a landing-sound-variant pick (e.g. via sfx_any('grass_land', 3, ...), a helper that exists in emoji/sounds.lua:175) and a hard-landing thud, but not wired into this slice yet. Treat these as intended hook points: "on landing, play a random grass_land1-3; on a HARD_LAND_VY-exceeding impact, also/instead play land_impact."

4. ToTeMoJi-derived body proportions / offsets

  • The image is drawn centered on the physics body's (x,y) at a normalized 22px width (s=(22/img.width)*spring.hit.x, main.lua:538) — no offset between sprite center and collider center; feet aren't separately tracked.
  • Spawn placement: spawn_player() sets y = terrain_height(x) - PLAYER_RADIUS (main.lua:551-554), i.e. the collider's center sits exactly PLAYER_RADIUS (10.5px) above the terrain surface height at that x — so the circle collider's bottom edge rests tangent to the terrain height sample, and the sprite is drawn from that same center. There's no separate "feet anchor" distinct from collider center/radius.
  • The "feet-sink" depth trick (main.lua:74-76, 694-697): the terrain is drawn a second time on the cover layer, above game (where the player draws), so the near lip of terrain visually overlaps the lower part of the player sprite/feet, making the sprite look like it's standing "into" the terrain rather than floating on top of a hard circle edge. This is a draw-order illusion, not a positional offset.
  • is_grounded() (main.lua:356-361) raycasts three parallel rays from y down to y + PLAYER_RADIUS + 1.5, at x-9, x, x+9 — i.e. it probes a ~18px-wide foot-stance under the circle rather than relying on physics contact alone, because the polyline chain's per-segment contacts can be flickery right at vertices.

5. Polyline-specific vs. transferable

Terrain-specific (polyline slope-solving), main.lua:133-186, 332-354:

  • terrain_height(x) / terrain_angle(x): linear-interpolate the y-height and segment angle from the TERRAIN polyline (main.lua:120-129, x=0..640, a hand-authored list of (x,y) points). A tile floor replaces this with a per-tile height lookup (typically uniform if flat, or a stair-stepped height depending on tile column) and would not need a continuous-angle query at all if the floor is flat (terrain_angle is used only by the "roll" mode's force projection along slope, main.lua:423, not by hop-walk).
  • terrain_walk(x0, dir, dist) (main.lua:157-186): walks a given arc-length distance along the polyline surface (not straight-line horizontal distance) from x0, correctly handling multiple slope segments in one hop. This entire function is polyline-only; on a flat tile floor, "walk dist along the surface" degenerates to "walk dist horizontally," i.e. land_x = x0 + dir*dist and dy = 0 always.
  • do_hop's downhill re-solve (dy, k, re-walking with HOP_L*k) and the HOP_MAX_GRADE/HOP_DOWNHILL clamping exist purely to make a fixed-arc-time ballistic hop land correctly on a sloped surface. On a flat floor dy is always 0, so all of this collapses to: T=HOP_T (fixed), dx=MOVE_MAX_V*HOP_T (fixed HOP_L), return vertical launch velocity HOP_VY unmodified. The hop becomes a simple fixed-length/fixed-height ballistic step — the entire slope-solving machinery (steps 2-3 of do_hop) can be dropped.
  • The roll mode's motor()/force-along-slope logic (update_roll, main.lua:405-458) is a separate alternate movement mode (toggled by mouse click) using a genuine Box2D dynamic circle with friction/restitution and slope-projected thrust — this is Box2D-specific (relies on collider:apply_force, get_mass, set_restitution) and doesn't transfer to a kinematic controller at all; the task's target is the hop controller, which is comparatively self-contained and portable once terrain_walk/terrain_angle are replaced by flat-tile equivalents.
  • is_grounded()'s raycast-based ground check is a Box2D raycast_entity call against the chain collider; a kinematic tile controller would replace this with a simple "tile below is solid" check at the same three x-offsets (or a single AABB-vs-tile overlap test), preserving the multi-sample width (~18px) if edge-straddling matters.
  • Everything else — HOP_VY, JUMP_VY, jump-cut rules, gravity, squash springs, sound hook, resting-gravity suppression, dizzy scaffold — is terrain-shape-agnostic and transfers directly, with GRAVITY_Y/velocities re-expressed in tiles/second per the target controller's units (conversion factor = tile size in px, e.g. if 1 tile = 16px, divide all px/s and px/s² constants by 16 to get tiles/s and tiles/s²).
Back to Delve Deep, My Unstoppable Machine!!! 1

Settings